| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A stack overflow in the org.json.JSONTokener.nextValue::JSONTokener.java component of hutool-json v5.8.10 allows attackers to cause a Denial of Service (DoS) via crafted JSON or XML data. |
| The PLC driver in ServerMain.exe in the Kepware KepServerEX 4 component in Schneider Electric StruxureWare SCADA Expert ClearSCADA 2010 R2 build 71.4165, 2010 R2.1 build 71.4325, 2010 R3 build 72.4560, 2010 R3.1 build 72.4644, 2013 R1 build 73.4729, 2013 R1.1 build 73.4832, 2013 R1.1a build 73.4903, 2013 R1.2 build 73.4955, and 2013 R2 build 74.5094 allows remote attackers to cause a denial of service (application crash) via a crafted OPF file (aka project file). |
| TCPUploader module listens on Port 10651/TCP for incoming connections.
Exploitation of this vulnerability could allow a remote unauthenticated
user access to release OS version information. While this is a minor
vulnerability, it represents a method for further network
reconnaissance. |
| The Modbus slave/outstation driver in the OPC Drivers 1.0.20 and earlier in IOServer OPC Server allows remote attackers to cause a denial of service (out-of-bounds read and daemon crash) via a crafted packet. |
| Stack-based buffer overflow in the C++ sample client in Schneider Electric OPC Factory Server (OFS) TLXCDSUOFS33 - 3.35, TLXCDSTOFS33 - 3.35, TLXCDLUOFS33 - 3.35, TLXCDLTOFS33 - 3.35, and TLXCDLFOFS33 - 3.35 allows local users to gain privileges via vectors involving a malformed configuration file. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix vector state restore in rt_sigreturn()
The RISC-V Vector specification states in "Appendix D: Calling
Convention for Vector State" [1] that "Executing a system call causes
all caller-saved vector registers (v0-v31, vl, vtype) and vstart to
become unspecified.". In the RISC-V kernel this is called "discarding
the vstate".
Returning from a signal handler via the rt_sigreturn() syscall, vector
discard is also performed. However, this is not an issue since the
vector state should be restored from the sigcontext, and therefore not
care about the vector discard.
The "live state" is the actual vector register in the running context,
and the "vstate" is the vector state of the task. A dirty live state,
means that the vstate and live state are not in synch.
When vectorized user_from_copy() was introduced, an bug sneaked in at
the restoration code, related to the discard of the live state.
An example when this go wrong:
1. A userland application is executing vector code
2. The application receives a signal, and the signal handler is
entered.
3. The application returns from the signal handler, using the
rt_sigreturn() syscall.
4. The live vector state is discarded upon entering the
rt_sigreturn(), and the live state is marked as "dirty", indicating
that the live state need to be synchronized with the current
vstate.
5. rt_sigreturn() restores the vstate, except the Vector registers,
from the sigcontext
6. rt_sigreturn() restores the Vector registers, from the sigcontext,
and now the vectorized user_from_copy() is used. The dirty live
state from the discard is saved to the vstate, making the vstate
corrupt.
7. rt_sigreturn() returns to the application, which crashes due to
corrupted vstate.
Note that the vectorized user_from_copy() is invoked depending on the
value of CONFIG_RISCV_ISA_V_UCOPY_THRESHOLD. Default is 768, which
means that vlen has to be larger than 128b for this bug to trigger.
The fix is simply to mark the live state as non-dirty/clean prior
performing the vstate restore. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/bpf: Fix IP after emitting call depth accounting
Adjust the IP passed to `emit_patch` so it calculates the correct offset
for the CALL instruction if `x86_call_depth_emit_accounting` emits code.
Otherwise we will skip some instructions and most likely crash. |
| In the Linux kernel, the following vulnerability has been resolved:
bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exit
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:
[ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[ 406.830676 ] #PF: supervisor read access in kernel mode
[ 406.831643 ] #PF: error_code(0x0000) - not-present page
[ 406.832487 ] PGD 0 P4D 0
[ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90
[ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 406.835796 ] RIP: 0010:kfree+0x62/0x140
[ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[ 406.841464 ] Call Trace:
[ 406.841583 ] <TASK>
[ 406.841682 ] ? __die+0x1f/0x70
[ 406.841828 ] ? page_fault_oops+0x159/0x470
[ 406.842014 ] ? fixup_exception+0x22/0x310
[ 406.842198 ] ? exc_page_fault+0x1ed/0x200
[ 406.842382 ] ? asm_exc_page_fault+0x22/0x30
[ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs]
[ 406.842842 ] ? kfree+0x62/0x140
[ 406.842988 ] ? kfree+0x104/0x140
[ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs]
[ 406.843390 ] kobject_put+0xb7/0x170
[ 406.843552 ] deactivate_locked_super+0x2f/0xa0
[ 406.843756 ] cleanup_mnt+0xba/0x150
[ 406.843917 ] task_work_run+0x59/0xa0
[ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0
[ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40
[ 406.844510 ] do_syscall_64+0x4e/0xf0
[ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 406.844907 ] RIP: 0033:0x7f0a2664e4fb |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: use OPTION_MPTCP_MPJ_SYNACK in subflow_finish_connect()
subflow_finish_connect() uses four fields (backup, join_id, thmac, none)
that may contain garbage unless OPTION_MPTCP_MPJ_SYNACK has been set
in mptcp_parse_option() |
| vuelidate is vulnerable to Inefficient Regular Expression Complexity |
| Mattermost Confluence Plugin version <1.5.0 fails to enforce authentication of the user to the Mattermost instance which allows unauthenticated attackers to access subscription details without via API call to GET subscription endpoint. |
| Anritsu ShockLine CHX File Parsing Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Anritsu ShockLine. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of CHX files. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26882. |
| Anritsu ShockLine CHX File Parsing Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Anritsu ShockLine. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of CHX files. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-26913. |
| A path traversal vulnerability has been reported to affect QuFirewall. If exploited, the vulnerability could allow authenticated administrators to read the contents of unexpected files and expose sensitive data via a network.
We have already fixed the vulnerability in the following version:
QuFirewall 2.4.1 ( 2024/02/01 ) and later
|
| A path traversal vulnerability has been reported to affect QuFirewall. If exploited, the vulnerability could allow authenticated administrators to read the contents of unexpected files and expose sensitive data via a network.
We have already fixed the vulnerability in the following version:
QuFirewall 2.4.1 ( 2024/02/01 ) and later
|
| A command injection vulnerability has been reported to affect QHora. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands.
We have already fixed the vulnerability in the following version:
QuRouter 2.4.5.032 and later |
| A command injection vulnerability has been reported to affect QHora. If exploited, the vulnerability could allow remote attackers who have gained administrator access to execute arbitrary commands.
We have already fixed the vulnerability in the following version:
QuRouter 2.4.6.028 and later |
| A command injection vulnerability has been reported to affect QHora. If an attacker gains local network access who have also gained an administrator account, they can then exploit the vulnerability to execute arbitrary commands.
We have already fixed the vulnerability in the following version:
QuRouter 2.4.6.028 and later |
| An improper authentication vulnerability has been reported to affect QHora. If an attacker gains local network access, they can then exploit the vulnerability to compromise the security of the system.
We have already fixed the vulnerability in the following version:
QuRouter 2.5.0.140 and later |
| A vulnerability was determined in Campcodes Online Beauty Parlor Management System 1.0. This affects an unknown part of the file /admin/add-services.php. Executing manipulation of the argument sername can lead to sql injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. |
