| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: avoid Non-NCQ command starvation
When a non-NCQ command is issued while NCQ commands are being executed,
ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing
should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command
deferring is correct and as mandated by the ACS specifications since
NCQ and non-NCQ commands cannot be mixed.
However, in the case of a host adapter using multiple submission queues,
when the target device is under a constant load of NCQ commands, there
are no guarantees that requeueing the non-NCQ command will be executed
later and it may be deferred again repeatedly as other submission queues
can constantly issue NCQ commands from different CPUs ahead of the
non-NCQ command. This can lead to very long delays for the execution of
non-NCQ commands, and even complete starvation for these commands in the
worst case scenario.
Since the block layer and the SCSI layer do not distinguish between
queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT
implementation must ensure forward progress for non-NCQ commands in the
presence of NCQ command traffic. This is similar to what SAS HBAs with a
hardware/firmware based SAT implementation do.
Implement such forward progress guarantee by limiting requeueing of
non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is
received and NCQ commands are in-flight, do not force a requeue of the
non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0
to indicate that the command was accepted but hold on to the qc using
the new deferred_qc field of struct ata_port.
This deferred qc will be issued using the work item deferred_qc_work
running the function ata_scsi_deferred_qc_work() once all in-flight
commands complete, which is checked with the port qc_defer() callback
return value indicating that no further delay is necessary. This check
is done using the helper function ata_scsi_schedule_deferred_qc() which
is called from ata_scsi_qc_complete(). This thus excludes this mechanism
from all internal non-NCQ commands issued by ATA EH.
When a port deferred_qc is non NULL, that is, the port has a command
waiting for the device queue to drain, the issuing of all incoming
commands (both NCQ and non-NCQ) is deferred using the regular busy
mechanism. This simplifies the code and also avoids potential denial of
service problems if a user issues too many non-NCQ commands.
Finally, whenever ata EH is scheduled, regardless of the reason, a
deferred qc is always requeued so that it can be retried once EH
completes. This is done by calling the function
ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids
the need for any special processing for the deferred qc in case of NCQ
error, link or device reset, or device timeout. |
| Previously, CVE-2024-45337 fixed an authorization bypass for misused ssh server configurations; if any other type of callback is passed other than public key, then the source-address validation would be skipped. |
| Ella Core is a 5G core designed for private networks. Prior to 1.10.0, a radio with a valid NG Setup can send a forged PDUSessionResourceSetupResponse carrying any UE's AMF-UE-NGAP-ID. Ella Core does not verify the message arrived on the SCTP association bound to that UE's logical NG-connection, then creates a GTP tunnel towards that radio. This vulnerability is fixed in 1.10.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix double free issue for tx spare buffer
In hns3_set_ringparam(), a temporary copy (tmp_rings) of the ring structure
is created for rollback. However, the tx_spare pointer in the original
ring handle is incorrectly left pointing to the old backup memory.
Later, if memory allocation fails in hns3_init_all_ring() during the setup,
the error path attempts to free all newly allocated rings. Since tx_spare
contains a stale (non-NULL) pointer from the backup, it is mistaken for
a newly allocated buffer and is erroneously freed, leading to a double-free
of the backup memory.
The root cause is that the tx_spare field was not cleared after its value
was saved in tmp_rings, leaving a dangling pointer.
Fix this by setting tx_spare to NULL in the original ring structure
when the creation of the new `tx_spare` fails. This ensures the
error cleanup path only frees genuinely newly allocated buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix & Optimize table creation from possibly unaligned memory
Source blob may come from userspace and might be unaligned.
Try to optize the copying process by avoiding unaligned memory accesses.
- Added Fixes tag
- Added "Fix &" to description as this doesn't just optimize but fixes
a potential unaligned memory access
[jj: remove duplicate word "convert" in comment trigger checkpatch warning] |
| In the Linux kernel, the following vulnerability has been resolved:
quota: fix livelock between quotactl and freeze_super
When a filesystem is frozen, quotactl_block() enters a retry loop
waiting for the filesystem to thaw. It acquires s_umount, checks the
freeze state, drops s_umount and uses sb_start_write() - sb_end_write()
pair to wait for the unfreeze.
However, this retry loop can trigger a livelock issue, specifically on
kernels with preemption disabled.
The mechanism is as follows:
1. freeze_super() sets SB_FREEZE_WRITE and calls sb_wait_write().
2. sb_wait_write() calls percpu_down_write(), which initiates
synchronize_rcu().
3. Simultaneously, quotactl_block() spins in its retry loop, immediately
executing the sb_start_write() - sb_end_write() pair.
4. Because the kernel is non-preemptible and the loop contains no
scheduling points, quotactl_block() never yields the CPU. This
prevents that CPU from reaching an RCU quiescent state.
5. synchronize_rcu() in the freezer thread waits indefinitely for the
quotactl_block() CPU to report a quiescent state.
6. quotactl_block() spins indefinitely waiting for the freezer to
advance, which it cannot do as it is blocked on the RCU sync.
This results in a hang of the freezer process and 100% CPU usage by the
quota process.
While this can occur intermittently on multi-core systems, it is
reliably reproducing on a node with the following script, running both
the freezer and the quota toggle on the same CPU:
# mkfs.ext4 -O quota /dev/sda 2g && mkdir a_mount
# mount /dev/sda -o quota,usrquota,grpquota a_mount
# taskset -c 3 bash -c "while true; do xfs_freeze -f a_mount; \
xfs_freeze -u a_mount; done" &
# taskset -c 3 bash -c "while true; do quotaon a_mount; \
quotaoff a_mount; done" &
Adding cond_resched() to the retry loop fixes the issue. It acts as an
RCU quiescent state, allowing synchronize_rcu() in percpu_down_write()
to complete. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message
When looking at the data in a USB urb, the actual_length is the size of
the buffer passed to the driver, not the transfer_buffer_length which is
set by the driver as the max size of the buffer.
When parsing the messages in ems_usb_read_bulk_callback() properly check
the size both at the beginning of parsing the message to make sure it is
big enough for the expected structure, and at the end of the message to
make sure we don't overflow past the end of the buffer for the next
message. |
| A vulnerability was found in itsourcecode Courier Management System 1.0. The affected element is an unknown function of the file /parcel_list.php. Performing a manipulation of the argument s results in sql injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. |
| phpMyFAQ before 4.1.2 contains an information disclosure vulnerability in the getIdFromSolutionId() method that lacks permission filtering, allowing unauthenticated attackers to enumerate restricted FAQ entries and read their titles via the /solution_id_{id}.html endpoint. Attackers can sequentially iterate solution IDs to discover all FAQs including those restricted to specific users or groups, leaking sensitive metadata through redirect Location headers and page canonical links. |
| phpMyFAQ before 4.1.2 contains a missing authorization vulnerability in the DELETE /admin/api/content/tags/{tagId} endpoint that allows any authenticated user to delete tags. Any logged-in user, including regular frontend users, can delete arbitrary tags by sending a DELETE request with a valid session cookie, resulting in permanent data loss and disruption of FAQ organization. |
| phpMyFAQ before 4.1.2 contains an unauthenticated SQL injection vulnerability in BuiltinCaptcha::garbageCollector() and BuiltinCaptcha::saveCaptcha() methods that interpolate unsanitized User-Agent headers into DELETE and INSERT queries. Unauthenticated attackers can exploit the public GET /api/captcha endpoint by crafting malicious User-Agent headers to perform time-based blind SQL injection, extracting sensitive data including user credentials, admin tokens, and SMTP credentials from the database. |
| phpMyFAQ before 4.1.2 contains an authorization bypass vulnerability in AbstractAdministrationController::userHasPermission() that fails to terminate execution after sending a forbidden response. Attackers can access all permission-protected admin pages by requesting their URLs as authenticated users, exposing admin logs, user data, system information, and application configuration. |
| phpMyFAQ before 4.1.2 contains a sql injection vulnerability in CurrentUser::setTokenData that allows authenticated attackers to execute arbitrary SQL by injecting malicious OAuth token claims. Attackers with Azure AD accounts containing SQL metacharacters in display names or JWT claims can break out of string literals and execute arbitrary database queries. |
| phpMyFAQ before 4.1.2 contains an insufficient authorization vulnerability in admin-api routes that allows authenticated ordinary users to access administrative endpoints by only checking login status instead of verifying backend privileges. Attackers with valid frontend user accounts can access sensitive backend operational information including dashboard versions, LDAP configuration, Elasticsearch statistics, and health-check data. |
| phpMyFAQ before 4.1.2 contains missing permission checks in ConfigurationTabController.php where 12 endpoints use userIsAuthenticated() instead of userHasPermission(CONFIGURATION_EDIT). Any authenticated user can enumerate system configuration metadata including permission model, cache backend, mail provider, and translation provider by querying /admin/api/configuration endpoints, violating least privilege access control. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
In `probe()`, `request_irq()` is called before allocating/registering a
`power_supply` handle. If an interrupt is fired between the call to
`request_irq()` and `power_supply_register()`, the `power_supply` handle
will be used uninitialized in `power_supply_changed()` in
`wm97xx_bat_update()` (triggered from the interrupt handler). This will
lead to a `NULL` pointer dereference since
Fix this racy `NULL` pointer dereference by making sure the IRQ is
requested _after_ the registration of the `power_supply` handle. Since
the IRQ is the last thing requests in the `probe()` now, remove the
error path for freeing it. Instead add one for unregistering the
`power_supply` handle when IRQ request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity-fec: fix reading parity bytes split across blocks (take 3)
fec_decode_bufs() assumes that the parity bytes of the first RS codeword
it decodes are never split across parity blocks.
This assumption is false. Consider v->fec->block_size == 4096 &&
v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each
call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <<
DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes.
Considering that the parity data for each message block starts on a
block boundary, the byte alignment in the parity data will iterate
through 272*i mod 4096 until the 3 parity blocks have been consumed. On
the 16th call (i=15), the alignment will be 4080 bytes into the first
block. Only 16 bytes remain in that block, but 17 parity bytes will be
needed. The code reads out-of-bounds from the parity block buffer.
Fortunately this doesn't normally happen, since it can occur only for
certain non-default values of fec_roots *and* when the maximum number of
buffers couldn't be allocated due to low memory. For example with
block_size=4096 only the following cases are affected:
fec_roots=17: nbufs in [1, 3, 5, 15]
fec_roots=19: nbufs in [1, 229]
fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195]
fec_roots=23: nbufs in [1, 89]
Regardless, fix it by refactoring how the parity blocks are read. |
| Kysely is a type-safe TypeScript SQL query builder. From 0.26.0 to 0.28.16, DefaultQueryCompiler.visitJSONPathLeg does not escape JSON-path metacharacters (., [, ], *, **, ?). When attacker-controlled input flows into eb.ref(col, '->$').key(input) or .at(input) — including type-safe code where the JSON column is shaped like Record<string, T> so K extends string is the inferred type — every dot becomes a path-leg separator, letting an attacker traverse from the intended key into sibling and child fields the developer never meant to expose. The result is read access (and, in update statements, write access) to JSON sub-fields outside the intended scope across MySQL, PostgreSQL ->$/->>$, and SQLite. This vulnerability is fixed in 0.28.17. |
| A vulnerability was found in Shenzhen Sixun Software Sixun Shanghui Group Business Management System 10. Affected by this vulnerability is an unknown functionality of the file /api/Dinner/PayConfig. Performing a manipulation of the argument tableno results in sql injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
