| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: hi846: Fix memleak in hi846_init_controls()
hi846_init_controls doesn't clean the allocated ctrl_hdlr
in case there is a failure, which causes memleak. Add
v4l2_ctrl_handler_free to free the resource properly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwl3945: Add missing check for create_singlethread_workqueue
Add the check for the return value of the create_singlethread_workqueue
in order to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix null-ptr-deref on inode->i_op in ntfs_lookup()
Syzbot reported a null-ptr-deref bug:
ntfs3: loop0: Different NTFS' sector size (1024) and media sector size
(512)
ntfs3: loop0: Mark volume as dirty due to NTFS errors
general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:d_flags_for_inode fs/dcache.c:1980 [inline]
RIP: 0010:__d_add+0x5ce/0x800 fs/dcache.c:2796
Call Trace:
<TASK>
d_splice_alias+0x122/0x3b0 fs/dcache.c:3191
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3688
do_filp_open+0x264/0x4f0 fs/namei.c:3718
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_open fs/open.c:1334 [inline]
__se_sys_open fs/open.c:1330 [inline]
__x64_sys_open+0x221/0x270 fs/open.c:1330
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
If the MFT record of ntfs inode is not a base record, inode->i_op can be
NULL. And a null-ptr-deref may happen:
ntfs_lookup()
dir_search_u() # inode->i_op is set to NULL
d_splice_alias()
__d_add()
d_flags_for_inode() # inode->i_op->get_link null-ptr-deref
Fix this by adding a Check on inode->i_op before calling the
d_splice_alias() function. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwl4965: Add missing check for create_singlethread_workqueue()
Add the check for the return value of the create_singlethread_workqueue()
in order to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probe
Use devm_of_iomap() instead of of_iomap() to automatically
handle the unused ioremap region. If any error occurs, regions allocated by
kzalloc() will leak, but using devm_kzalloc() instead will automatically
free the memory using devm_kfree().
Also, fix error handling of hws by adding unregister_hws label, which
unregisters remaining hws when iomap failed. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_mqs: move of_node_put() to the correct location
of_node_put() should have been done directly after
mqs_priv->regmap = syscon_node_to_regmap(gpr_np);
otherwise it creates a reference leak on the success path.
To fix this, of_node_put() is moved to the correct location, and change
all the gotos to direct returns. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: fix a possible null-pointer dereference due to data race in snd_hdac_regmap_sync()
The variable codec->regmap is often protected by the lock
codec->regmap_lock when is accessed. However, it is accessed without
holding the lock when is accessed in snd_hdac_regmap_sync():
if (codec->regmap)
In my opinion, this may be a harmful race, because if codec->regmap is
set to NULL right after the condition is checked, a null-pointer
dereference can occur in the called function regcache_sync():
map->lock(map->lock_arg); --> Line 360 in drivers/base/regmap/regcache.c
To fix this possible null-pointer dereference caused by data race, the
mutex_lock coverage is extended to protect the if statement as well as the
function call to regcache_sync().
[ Note: the lack of the regmap_lock itself is harmless for the current
codec driver implementations, as snd_hdac_regmap_sync() is only for
PM runtime resume that is prohibited during the codec probe.
But the change makes the whole code more consistent, so it's merged
as is -- tiwai ] |
| The Blaze Demo Importer plugin for WordPress is vulnerable to unauthorized limited plugin install due to a missing capability check on the 'blaze_demo_importer_install_plugin' function in all versions up to, and including, 1.0.12. This makes it possible for authenticated attackers, with Subscriber-level access and above, to install and activate a limited number of specific plugins. The News Kit Elementor Addons plugin and a BlazeThemes theme must be installed and activated in order to exploit the vulnerability. |
| No proper validation of the length of user input in olcp_ind_handler in zephyr/subsys/bluetooth/services/ots/ots_client.c. |
| BT: Missing length checks of net_buf in rfcomm_handle_data |
| FDSK Leak in ABB, Busch-Jaeger, FTS Display (version 1.00) and BCU (version 1.3.0.33) allows attacker to take control via access to local KNX Bus-System |
| BT: Unchecked user input in bap_broadcast_assistant |
| BT: Missing Check in LL_CONNECTION_UPDATE_IND Packet Leads to Division by Zero |
| A vulnerability was found in Portabilis i-Educar up to 2.10. This issue affects some unknown processing of the file /intranet/educar_calendario_dia_motivo_cad.php of the component Calendar Module. The manipulation of the argument Motivo/descricao results in cross site scripting. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Some "Stored Value" Unattended Payment Solutions of KioSoft use vulnerable NFC cards. Attackers could potentially use this vulnerability to change the balance on the cards and generate money. The account balance is stored on an insecure MiFare Classic NFC card and can be read and written back. By carefully observing changes in card dumps, one can identify fields that store the cash value of the card. Additionally, a checksum can be identified, which is created by XOR-ing the cash and an unknown field with a certain value. By updating the fields accordingly, arbitrary amounts of money can be loaded onto the card (up to $655,35) to pay for goods. |
| In the monitoring event logs page, it is possible to alter the http request to insert a reflect payload in the DB. Caused by an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Centreon web (Monitoring event logs modules) allows SQL Injection.This issue affects web: 24.10.0, 24.04.0, 23.10.0. |
| An authenticated remote code execution vulnerability exists in NSClient++ version 0.5.2.35 when the web interface and ExternalScripts module are enabled. A remote attacker with the administrator password can authenticate to the web interface (default port 8443), inject arbitrary commands as external scripts via the /settings/query.json API, save the configuration, and trigger the script via the /query/{name} endpoint. The injected commands are executed with SYSTEM privileges, enabling full remote compromise.
This capability is an intended feature, but the lack of safeguards or privilege separation makes it risky when exposed to untrusted actors. |
| Bolt CMS versions 3.7.0 and earlier contain a chain of vulnerabilities that together allow an authenticated user to achieve remote code execution. A user with valid credentials can inject arbitrary PHP code into the displayname field of the user profile, which is rendered unsanitized in backend templates. The attacker can then list and rename cached session files via the /async/browse/cache/.sessions and /async/folder/rename endpoints. By renaming a .session file to a path under the publicly accessible /files/ directory with a .php extension, the attacker can turn the injected code into an executable web shell. Finally, the attacker triggers the payload via a crafted HTTP GET request to the rogue file.
NOTE: The vendor announced that Bolt 3 reached end-of-life after 31 December 2021. |
| An authenticated remote code execution vulnerability exists in Pandora FMS version 7.0NG and earlier. The net_tools.php functionality allows authenticated users to execute arbitrary OS commands via the select_ips parameter when performing network tools operations, such as pinging. This occurs because user input is not properly sanitized before being passed to system commands, enabling command injection. |
