| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dsi: fix memory corruption with too many bridges
Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.
Patchwork: https://patchwork.freedesktop.org/patch/502668/ |
| In the Linux kernel, the following vulnerability has been resolved:
block: be a bit more careful in checking for NULL bdev while polling
Wei reports a crash with an application using polled IO:
PGD 14265e067 P4D 14265e067 PUD 47ec50067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 21915 Comm: iocore_0 Kdump: loaded Tainted: G S 5.12.0-0_fbk12_clang_7346_g1bb6f2e7058f #1
Hardware name: Wiwynn Delta Lake MP T8/Delta Lake-Class2, BIOS Y3DLM08 04/10/2022
RIP: 0010:bio_poll+0x25/0x200
Code: 0f 1f 44 00 00 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 28 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 48 8b 47 08 <48> 8b 80 70 02 00 00 4c 8b 70 50 8b 6f 34 31 db 83 fd ff 75 25 65
RSP: 0018:ffffc90005fafdf8 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 74b43cd65dd66600
RDX: 0000000000000003 RSI: ffffc90005fafe78 RDI: ffff8884b614e140
RBP: ffff88849964df78 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88849964df00
R13: ffffc90005fafe78 R14: ffff888137d3c378 R15: 0000000000000001
FS: 00007fd195000640(0000) GS:ffff88903f400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000270 CR3: 0000000466121001 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
iocb_bio_iopoll+0x1d/0x30
io_do_iopoll+0xac/0x250
__se_sys_io_uring_enter+0x3c5/0x5a0
? __x64_sys_write+0x89/0xd0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x94f225d
Code: 24 cc 00 00 00 41 8b 84 24 d0 00 00 00 c1 e0 04 83 e0 10 41 09 c2 8b 33 8b 53 04 4c 8b 43 18 4c 63 4b 0c b8 aa 01 00 00 0f 05 <85> c0 0f 88 85 00 00 00 29 03 45 84 f6 0f 84 88 00 00 00 41 f6 c7
RSP: 002b:00007fd194ffcd88 EFLAGS: 00000202 ORIG_RAX: 00000000000001aa
RAX: ffffffffffffffda RBX: 00007fd194ffcdc0 RCX: 00000000094f225d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000007
RBP: 00007fd194ffcdb0 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000001 R11: 0000000000000202 R12: 00007fd269d68030
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
which is due to bio->bi_bdev being NULL. This can happen if we have two
tasks doing polled IO, and task B ends up completing IO from task A if
they are sharing a poll queue. If task B completes the IO and puts the
bio into our cache, then it can allocate that bio again before task A
is done polling for it. As that would necessitate a preempt between the
two tasks, it's enough to just be a bit more careful in checking for
whether or not bio->bi_bdev is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
led: qcom-lpg: Fix sleeping in atomic
lpg_brighness_set() function can sleep, while led's brightness_set()
callback must be non-blocking. Change LPG driver to use
brightness_set_blocking() instead.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
preempt_count: 101, expected: 0
INFO: lockdep is turned off.
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.1.0-rc1-00014-gbe99b089c6fc-dirty #85
Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
Call trace:
dump_backtrace.part.0+0xe4/0xf0
show_stack+0x18/0x40
dump_stack_lvl+0x88/0xb4
dump_stack+0x18/0x34
__might_resched+0x170/0x254
__might_sleep+0x48/0x9c
__mutex_lock+0x4c/0x400
mutex_lock_nested+0x2c/0x40
lpg_brightness_single_set+0x40/0x90
led_set_brightness_nosleep+0x34/0x60
led_heartbeat_function+0x80/0x170
call_timer_fn+0xb8/0x340
__run_timers.part.0+0x20c/0x254
run_timer_softirq+0x3c/0x7c
_stext+0x14c/0x578
____do_softirq+0x10/0x20
call_on_irq_stack+0x2c/0x5c
do_softirq_own_stack+0x1c/0x30
__irq_exit_rcu+0x164/0x170
irq_exit_rcu+0x10/0x40
el1_interrupt+0x38/0x50
el1h_64_irq_handler+0x18/0x2c
el1h_64_irq+0x64/0x68
cpuidle_enter_state+0xc8/0x380
cpuidle_enter+0x38/0x50
do_idle+0x244/0x2d0
cpu_startup_entry+0x24/0x30
rest_init+0x128/0x1a0
arch_post_acpi_subsys_init+0x0/0x18
start_kernel+0x6f4/0x734
__primary_switched+0xbc/0xc4 |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix memory leak when build ntlmssp negotiate blob failed
There is a memory leak when mount cifs:
unreferenced object 0xffff888166059600 (size 448):
comm "mount.cifs", pid 51391, jiffies 4295596373 (age 330.596s)
hex dump (first 32 bytes):
fe 53 4d 42 40 00 00 00 00 00 00 00 01 00 82 00 .SMB@...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000060609a61>] mempool_alloc+0xe1/0x260
[<00000000adfa6c63>] cifs_small_buf_get+0x24/0x60
[<00000000ebb404c7>] __smb2_plain_req_init+0x32/0x460
[<00000000bcf875b4>] SMB2_sess_alloc_buffer+0xa4/0x3f0
[<00000000753a2987>] SMB2_sess_auth_rawntlmssp_negotiate+0xf5/0x480
[<00000000f0c1f4f9>] SMB2_sess_setup+0x253/0x410
[<00000000a8b83303>] cifs_setup_session+0x18f/0x4c0
[<00000000854bd16d>] cifs_get_smb_ses+0xae7/0x13c0
[<000000006cbc43d9>] mount_get_conns+0x7a/0x730
[<000000005922d816>] cifs_mount+0x103/0xd10
[<00000000e33def3b>] cifs_smb3_do_mount+0x1dd/0xc90
[<0000000078034979>] smb3_get_tree+0x1d5/0x300
[<000000004371f980>] vfs_get_tree+0x41/0xf0
[<00000000b670d8a7>] path_mount+0x9b3/0xdd0
[<000000005e839a7d>] __x64_sys_mount+0x190/0x1d0
[<000000009404c3b9>] do_syscall_64+0x35/0x80
When build ntlmssp negotiate blob failed, the session setup request
should be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: do not write dirty data after degenerating to read-only
According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.
After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads. However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.
Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.
This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential data race in rxrpc_wait_to_be_connected()
Inside the loop in rxrpc_wait_to_be_connected() it checks call->error to
see if it should exit the loop without first checking the call state. This
is probably safe as if call->error is set, the call is dead anyway, but we
should probably wait for the call state to have been set to completion
first, lest it cause surprise on the way out.
Fix this by only accessing call->error if the call is complete. We don't
actually need to access the error inside the loop as we'll do that after.
This caused the following report:
BUG: KCSAN: data-race in rxrpc_send_data / rxrpc_set_call_completion
write to 0xffff888159cf3c50 of 4 bytes by task 25673 on cpu 1:
rxrpc_set_call_completion+0x71/0x1c0 net/rxrpc/call_state.c:22
rxrpc_send_data_packet+0xba9/0x1650 net/rxrpc/output.c:479
rxrpc_transmit_one+0x1e/0x130 net/rxrpc/output.c:714
rxrpc_decant_prepared_tx net/rxrpc/call_event.c:326 [inline]
rxrpc_transmit_some_data+0x496/0x600 net/rxrpc/call_event.c:350
rxrpc_input_call_event+0x564/0x1220 net/rxrpc/call_event.c:464
rxrpc_io_thread+0x307/0x1d80 net/rxrpc/io_thread.c:461
kthread+0x1ac/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
read to 0xffff888159cf3c50 of 4 bytes by task 25672 on cpu 0:
rxrpc_send_data+0x29e/0x1950 net/rxrpc/sendmsg.c:296
rxrpc_do_sendmsg+0xb7a/0xc20 net/rxrpc/sendmsg.c:726
rxrpc_sendmsg+0x413/0x520 net/rxrpc/af_rxrpc.c:565
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x375/0x4c0 net/socket.c:2501
___sys_sendmsg net/socket.c:2555 [inline]
__sys_sendmmsg+0x263/0x500 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00000000 -> 0xffffffea |
| In the Linux kernel, the following vulnerability has been resolved:
fs: dlm: fix race in lowcomms
This patch fixes a race between queue_work() in
_dlm_lowcomms_commit_msg() and srcu_read_unlock(). The queue_work() can
take the final reference of a dlm_msg and so msg->idx can contain
garbage which is signaled by the following warning:
[ 676.237050] ------------[ cut here ]------------
[ 676.237052] WARNING: CPU: 0 PID: 1060 at include/linux/srcu.h:189 dlm_lowcomms_commit_msg+0x41/0x50
[ 676.238945] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common iTCO_wdt iTCO_vendor_support qxl kvm_intel drm_ttm_helper vmw_vsock_virtio_transport kvm vmw_vsock_virtio_transport_common ttm irqbypass crc32_pclmul joydev crc32c_intel serio_raw drm_kms_helper vsock virtio_scsi virtio_console virtio_balloon snd_pcm drm syscopyarea sysfillrect sysimgblt snd_timer fb_sys_fops i2c_i801 lpc_ich snd i2c_smbus soundcore pcspkr
[ 676.244227] CPU: 0 PID: 1060 Comm: lock_torture_wr Not tainted 5.19.0-rc3+ #1546
[ 676.245216] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014
[ 676.246460] RIP: 0010:dlm_lowcomms_commit_msg+0x41/0x50
[ 676.247132] Code: fe ff ff ff 75 24 48 c7 c6 bd 0f 49 bb 48 c7 c7 38 7c 01 bd e8 00 e7 ca ff 89 de 48 c7 c7 60 78 01 bd e8 42 3d cd ff 5b 5d c3 <0f> 0b eb d8 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48
[ 676.249253] RSP: 0018:ffffa401c18ffc68 EFLAGS: 00010282
[ 676.249855] RAX: 0000000000000001 RBX: 00000000ffff8b76 RCX: 0000000000000006
[ 676.250713] RDX: 0000000000000000 RSI: ffffffffbccf3a10 RDI: ffffffffbcc7b62e
[ 676.251610] RBP: ffffa401c18ffc70 R08: 0000000000000001 R09: 0000000000000001
[ 676.252481] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000005
[ 676.253421] R13: ffff8b76786ec370 R14: ffff8b76786ec370 R15: ffff8b76786ec480
[ 676.254257] FS: 0000000000000000(0000) GS:ffff8b7777800000(0000) knlGS:0000000000000000
[ 676.255239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 676.255897] CR2: 00005590205d88b8 CR3: 000000017656c003 CR4: 0000000000770ee0
[ 676.256734] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 676.257567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 676.258397] PKRU: 55555554
[ 676.258729] Call Trace:
[ 676.259063] <TASK>
[ 676.259354] dlm_midcomms_commit_mhandle+0xcc/0x110
[ 676.259964] queue_bast+0x8b/0xb0
[ 676.260423] grant_pending_locks+0x166/0x1b0
[ 676.261007] _unlock_lock+0x75/0x90
[ 676.261469] unlock_lock.isra.57+0x62/0xa0
[ 676.262009] dlm_unlock+0x21e/0x330
[ 676.262457] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 676.263183] torture_unlock+0x5a/0x90 [dlm_locktorture]
[ 676.263815] ? preempt_count_sub+0xba/0x100
[ 676.264361] ? complete+0x1d/0x60
[ 676.264777] lock_torture_writer+0xb8/0x150 [dlm_locktorture]
[ 676.265555] kthread+0x10a/0x130
[ 676.266007] ? kthread_complete_and_exit+0x20/0x20
[ 676.266616] ret_from_fork+0x22/0x30
[ 676.267097] </TASK>
[ 676.267381] irq event stamp: 9579855
[ 676.267824] hardirqs last enabled at (9579863): [<ffffffffbb14e6f8>] __up_console_sem+0x58/0x60
[ 676.268896] hardirqs last disabled at (9579872): [<ffffffffbb14e6dd>] __up_console_sem+0x3d/0x60
[ 676.270008] softirqs last enabled at (9579798): [<ffffffffbc200349>] __do_softirq+0x349/0x4c7
[ 676.271438] softirqs last disabled at (9579897): [<ffffffffbb0d54c0>] irq_exit_rcu+0xb0/0xf0
[ 676.272796] ---[ end trace 0000000000000000 ]---
I reproduced this warning with dlm_locktorture test which is currently
not upstream. However this patch fix the issue by make a additional
refcount between dlm_lowcomms_new_msg() and dlm_lowcomms_commit_msg().
In case of the race the kref_put() in dlm_lowcomms_commit_msg() will be
the final put. |
| In the Linux kernel, the following vulnerability has been resolved:
lwt: Fix return values of BPF xmit ops
BPF encap ops can return different types of positive values, such like
NET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from function
skb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such return
values would be treated implicitly as LWTUNNEL_XMIT_CONTINUE in
ip(6)_finish_output2. When this happens, skbs that have been freed would
continue to the neighbor subsystem, causing use-after-free bug and
kernel crashes.
To fix the incorrect behavior, skb_do_redirect return values can be
simply discarded, the same as tc-egress behavior. On the other hand,
bpf_lwt_xmit_reroute returns useful errors to local senders, e.g. PMTU
information. Thus convert its return values to avoid the conflict with
LWTUNNEL_XMIT_CONTINUE. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6mr: Fix skb_under_panic in ip6mr_cache_report()
skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4
head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:192!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x152/0x1d0
Call Trace:
<TASK>
skb_push+0xc4/0xe0
ip6mr_cache_report+0xd69/0x19b0
reg_vif_xmit+0x406/0x690
dev_hard_start_xmit+0x17e/0x6e0
__dev_queue_xmit+0x2d6a/0x3d20
vlan_dev_hard_start_xmit+0x3ab/0x5c0
dev_hard_start_xmit+0x17e/0x6e0
__dev_queue_xmit+0x2d6a/0x3d20
neigh_connected_output+0x3ed/0x570
ip6_finish_output2+0x5b5/0x1950
ip6_finish_output+0x693/0x11c0
ip6_output+0x24b/0x880
NF_HOOK.constprop.0+0xfd/0x530
ndisc_send_skb+0x9db/0x1400
ndisc_send_rs+0x12a/0x6c0
addrconf_dad_completed+0x3c9/0xea0
addrconf_dad_work+0x849/0x1420
process_one_work+0xa22/0x16e0
worker_thread+0x679/0x10c0
ret_from_fork+0x28/0x60
ret_from_fork_asm+0x11/0x20
When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit().
reg_vif_xmit()
ip6mr_cache_report()
skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4
And skb_push declared as:
void *skb_push(struct sk_buff *skb, unsigned int len);
skb->data -= len;
//0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850
skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: designware: Fix handling of real but unexpected device interrupts
Commit c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI
IDs") caused a regression on certain Gigabyte motherboards for Intel
Alder Lake-S where system crashes to NULL pointer dereference in
i2c_dw_xfer_msg() when system resumes from S3 sleep state ("deep").
I was able to debug the issue on Gigabyte Z690 AORUS ELITE and made
following notes:
- Issue happens when resuming from S3 but not when resuming from
"s2idle"
- PCI device 00:15.0 == i2c_designware.0 is already in D0 state when
system enters into pci_pm_resume_noirq() while all other i2c_designware
PCI devices are in D3. Devices were runtime suspended and in D3 prior
entering into suspend
- Interrupt comes after pci_pm_resume_noirq() when device interrupts are
re-enabled
- According to register dump the interrupt really comes from the
i2c_designware.0. Controller is enabled, I2C target address register
points to a one detectable I2C device address 0x60 and the
DW_IC_RAW_INTR_STAT register START_DET, STOP_DET, ACTIVITY and
TX_EMPTY bits are set indicating completed I2C transaction.
My guess is that the firmware uses this controller to communicate with
an on-board I2C device during resume but does not disable the controller
before giving control to an operating system.
I was told the UEFI update fixes this but never the less it revealed the
driver is not ready to handle TX_EMPTY (or RX_FULL) interrupt when device
is supposed to be idle and state variables are not set (especially the
dev->msgs pointer which may point to NULL or stale old data).
Introduce a new software status flag STATUS_ACTIVE indicating when the
controller is active in driver point of view. Now treat all interrupts
that occur when is not set as unexpected and mask all interrupts from
the controller. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ov2740: Fix memleak in ov2740_init_controls()
There is a kmemleak when testing the media/i2c/ov2740.c with bpf mock
device:
unreferenced object 0xffff8881090e19e0 (size 16):
comm "51-i2c-ov2740", pid 278, jiffies 4294781584 (age 23.613s)
hex dump (first 16 bytes):
00 f3 7c 0b 81 88 ff ff 80 75 6a 09 81 88 ff ff ..|......uj.....
backtrace:
[<000000004e9fad8f>] __kmalloc_node+0x44/0x1b0
[<0000000039c802f4>] kvmalloc_node+0x34/0x180
[<000000009b8b5c63>] v4l2_ctrl_handler_init_class+0x11d/0x180
[videodev]
[<0000000038644056>] ov2740_probe+0x37d/0x84f [ov2740]
[<0000000092489f59>] i2c_device_probe+0x28d/0x680
[<000000001038babe>] really_probe+0x17c/0x3f0
[<0000000098c7af1c>] __driver_probe_device+0xe3/0x170
[<00000000e1b3dc24>] device_driver_attach+0x34/0x80
[<000000005a04a34d>] bind_store+0x10b/0x1a0
[<00000000ce25d4f2>] drv_attr_store+0x49/0x70
[<000000007d9f4e9a>] sysfs_kf_write+0x8c/0xb0
[<00000000be6cff0f>] kernfs_fop_write_iter+0x216/0x2e0
[<0000000031ddb40a>] vfs_write+0x658/0x810
[<0000000041beecdd>] ksys_write+0xd6/0x1b0
[<0000000023755840>] do_syscall_64+0x38/0x90
[<00000000b2cc2da2>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
ov2740_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: mm: Add p?d_leaf() definitions
When I do LTP test, LTP test case ksm06 caused panic at
break_ksm_pmd_entry
-> pmd_leaf (Huge page table but False)
-> pte_present (panic)
The reason is pmd_leaf() is not defined, So like commit 501b81046701
("mips: mm: add p?d_leaf() definitions") add p?d_leaf() definition for
LoongArch. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev().
With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet that
has the link-local address as src and dst IP and will be forwarded to
an external IP in the IPv6 Ext Hdr.
For example, the script below generates a packet whose src IP is the
link-local address and dst is updated to 11::.
# for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done
# python3
>>> from socket import *
>>> from scapy.all import *
>>>
>>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456"
>>>
>>> pkt = IPv6(src=SRC_ADDR, dst=DST_ADDR)
>>> pkt /= IPv6ExtHdrSegmentRouting(type=4, addresses=["11::", "22::"], segleft=1)
>>>
>>> sk = socket(AF_INET6, SOCK_RAW, IPPROTO_RAW)
>>> sk.sendto(bytes(pkt), (DST_ADDR, 0))
For such a packet, we call ip6_route_input() to look up a route for the
next destination in these three functions depending on the header type.
* ipv6_rthdr_rcv()
* ipv6_rpl_srh_rcv()
* ipv6_srh_rcv()
If no route is found, ip6_null_entry is set to skb, and the following
dst_input(skb) calls ip6_pkt_drop().
Finally, in icmp6_dev(), we dereference skb_rt6_info(skb)->rt6i_idev->dev
as the input device is the loopback interface. Then, we have to check if
skb_rt6_info(skb)->rt6i_idev is NULL or not to avoid NULL pointer deref
for ip6_null_entry.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 157 Comm: python3 Not tainted 6.4.0-11996-gb121d614371c #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503)
Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01
RSP: 0018:ffffc90000003c70 EFLAGS: 00000286
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0
RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18
RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001
R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10
R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0
FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
ip6_pkt_drop (net/ipv6/route.c:4513)
ipv6_rthdr_rcv (net/ipv6/exthdrs.c:640 net/ipv6/exthdrs.c:686)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5))
ip6_input_finish (./include/linux/rcupdate.h:781 net/ipv6/ip6_input.c:483)
__netif_receive_skb_one_core (net/core/dev.c:5455)
process_backlog (./include/linux/rcupdate.h:781 net/core/dev.c:5895)
__napi_poll (net/core/dev.c:6460)
net_rx_action (net/core/dev.c:6529 net/core/dev.c:6660)
__do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554)
do_softirq (kernel/softirq.c:454 kernel/softirq.c:441)
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:381)
__dev_queue_xmit (net/core/dev.c:4231)
ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:135)
rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914)
sock_sendmsg (net/socket.c:725 net/socket.c:748)
__sys_sendto (net/socket.c:2134)
__x64_sys_sendto (net/socket.c:2146 net/socket.c:2142 net/socket.c:2142)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f9dc751baea
Code: d8 64 89 02 48 c7 c0 ff f
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Check scheduler work queue before calling timeout handling
During an IGT GPU reset test we see again oops despite of
commit 0c8c901aaaebc9 (drm/sched: Check scheduler ready before calling
timeout handling).
It uses ready condition whether to call drm_sched_fault which unwind
the TDR leads to GPU reset.
However it looks the ready condition is overloaded with other meanings,
for example, for the following stack is related GPU reset :
0 gfx_v9_0_cp_gfx_start
1 gfx_v9_0_cp_gfx_resume
2 gfx_v9_0_cp_resume
3 gfx_v9_0_hw_init
4 gfx_v9_0_resume
5 amdgpu_device_ip_resume_phase2
does the following:
/* start the ring */
gfx_v9_0_cp_gfx_start(adev);
ring->sched.ready = true;
The same approach is for other ASICs as well :
gfx_v8_0_cp_gfx_resume
gfx_v10_0_kiq_resume, etc...
As a result, our GPU reset test causes GPU fault which calls unconditionally gfx_v9_0_fault
and then drm_sched_fault. However now it depends on whether the interrupt service routine
drm_sched_fault is executed after gfx_v9_0_cp_gfx_start is completed which sets the ready
field of the scheduler to true even for uninitialized schedulers and causes oops vs
no fault or when ISR drm_sched_fault is completed prior gfx_v9_0_cp_gfx_start and
NULL pointer dereference does not occur.
Use the field timeout_wq to prevent oops for uninitialized schedulers.
The field could be initialized by the work queue of resetting the domain.
v1: Corrections to commit message (Luben) |
| Server-Side Request Forgery (SSRF) vulnerability in Ghost allows an attacker to access internal resources.This issue affects Ghost: from 6.0.0 through 6.0.8, from 5.99.0 through 5.130.3. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/habanalabs: fix mem leak in capture user mappings
This commit fixes a memory leak caused when clearing the user_mappings
info when a new context is opened immediately after user_mapping is
captured and a hard reset is performed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Fix null-ptr-deref in vkms_release()
A null-ptr-deref is triggered when it tries to destroy the workqueue in
vkms->output.composer_workq in vkms_release().
KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
CPU: 5 PID: 17193 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf #24
RIP: 0010:destroy_workqueue+0x2f/0x710
...
Call Trace:
<TASK>
? vkms_config_debugfs_init+0x50/0x50 [vkms]
__devm_drm_dev_alloc+0x15a/0x1c0 [drm]
vkms_init+0x245/0x1000 [vkms]
do_one_initcall+0xd0/0x4f0
do_init_module+0x1a4/0x680
load_module+0x6249/0x7110
__do_sys_finit_module+0x140/0x200
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The reason is that an OOM happened which triggers the destroy of the
workqueue, however, the workqueue is alloced in the later process,
thus a null-ptr-deref happened. A simple call graph is shown as below:
vkms_init()
vkms_create()
devm_drm_dev_alloc()
__devm_drm_dev_alloc()
devm_drm_dev_init()
devm_add_action_or_reset()
devm_add_action() # an error happened
devm_drm_dev_init_release()
drm_dev_put()
kref_put()
drm_dev_release()
vkms_release()
destroy_workqueue() # null-ptr-deref happened
vkms_modeset_init()
vkms_output_init()
vkms_crtc_init() # where the workqueue get allocated
Fix this by checking if composer_workq is NULL before passing it to
the destroy_workqueue() in vkms_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: check slab-out-of-bounds in md_bitmap_get_counter
If we write a large number to md/bitmap_set_bits, md_bitmap_checkpage()
will return -EINVAL because 'page >= bitmap->pages', but the return value
was not checked immediately in md_bitmap_get_counter() in order to set
*blocks value and slab-out-of-bounds occurs.
Move check of 'page >= bitmap->pages' to md_bitmap_get_counter() and
return directly if true. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: da9063: better fix null deref with partial DT
Two versions of the original patch were sent but V1 was merged instead
of V2 due to a mistake.
So update to V2.
The advantage of V2 is that it completely avoids dereferencing the pointer,
even just to take the address, which may fix problems with some compilers.
Both versions work on my gcc 9.4 but use the safer one. |
