| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A denial-of-service vulnerability exists in the omec-project UPF (pfcpiface component) in version upf-epc-pfcpiface:2.1.3-dev. After PFCP association, a PFCP Session Establishment Request that includes a CreateFAR with an empty or truncated IPv4 address field is not properly validated. During parsing, parseFAR() calls ip2int(), which performs an out-of-bounds read on the IPv4 address buffer and triggers an index-out-of-range panic. An attacker who can send PFCP Session Establishment Request messages to the UPF's N4/PFCP endpoint can exploit this issue to repeatedly crash the UPF and disrupt user-plane services. |
| A denial-of-service vulnerability exists in the omec-project UPF (pfcpiface component) in version upf-epc-pfcpiface:2.1.3-dev. After PFCP association, a specially crafted PFCP Session Establishment Request with a CreatePDR that contains a malformed Flow-Description is not robustly validated. The Flow-Description parser (parseFlowDesc) can read beyond the bounds of the provided buffer, causing a panic and terminating the UPF process. An attacker who can send PFCP Session Establishment Request messages to the UPF's N4/PFCP endpoint can exploit this issue to repeatedly crash the UPF. |
| Meltytech Shotcut 25.10.31 is vulnerable to Buffer Overflow. A memory access violation occurs when processing MLT project files with manipulated width and height parameters. By setting these values to extremely large numbers, the application attempts to allocate excessive memory during image processing, triggering a buffer overflow in the mlt_image_fill_white function. |
| The free5GC UPF suffers from a lack of bounds checking on the SEID when processing PFCP Session Deletion Requests. An unauthenticated remote attacker can send a request with a very large SEID (e.g., 0xFFFFFFFFFFFFFFFF) that causes an integer conversion/underflow in LocalNode.DeleteSess() / LocalNode.Sess() when a uint64 SEID is converted to int and used in index arithmetic. This leads to a negative index into n.sess and a Go runtime panic, resulting in a denial of service (UPF crash). The issue has been reproduced on free5GC v4.1.0 with crashes observed in the session lookup/deletion path in internal/pfcp/node.go; other versions may also be affected. No authentication is required. |
| A vulnerability was identified in UTT 进取 512W up to 3.1.7.7-171114. Affected is the function strcpy of the file /goform/formConfigFastDirectionW. The manipulation of the argument ssid leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in UTT 进取 512W up to 3.1.7.7-171114. This impacts the function strcpy of the file /goform/formNatStaticMap of the component Endpoint. Executing manipulation of the argument NatBind can lead to buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: bno055: fix OOB access of hw_xlate array
Fix a potential out-of-bounds array access of the hw_xlate array in
bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the
vals array instead of the length of the hw_xlate array. In the case of
bno055_gyr_scale, the vals array is larger than the hw_xlate array,
so this could result in an out-of-bounds access. In practice, this
shouldn't happen though because a match should always be found which
breaks out of the for loop before it iterates beyond the end of the
hw_xlate array.
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be
sure we are iterating over the correct length. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: aio_iiro_16: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl812: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & board->irq_bits) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| Buffer Overflow Vulnerability in libcdio in commit 4c840665 allows an attacker to execute arbitrary code via a crafted ISO 9660 image file. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid out-of-boundary access in devs.path
- touch /mnt/f2fs/012345678901234567890123456789012345678901234567890123
- truncate -s $((1024*1024*1024)) \
/mnt/f2fs/012345678901234567890123456789012345678901234567890123
- touch /mnt/f2fs/file
- truncate -s $((1024*1024*1024)) /mnt/f2fs/file
- mkfs.f2fs /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
-c /mnt/f2fs/file
- mount /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
/mnt/f2fs/loop
[16937.192225] F2FS-fs (loop0): Mount Device [ 0]: /mnt/f2fs/012345678901234567890123456789012345678901234567890123\xff\x01, 511, 0 - 3ffff
[16937.192268] F2FS-fs (loop0): Failed to find devices
If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may
not end up w/ null character due to path array is fully filled, So
accidently, fields locate after path[] may be treated as part of
device path, result in parsing wrong device path.
struct f2fs_dev_info {
...
char path[MAX_PATH_LEN];
...
};
Let's add one byte space for sbi->devs.path[] to store null
character of device path string. |
| Buffer Overflow vulenrability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via the libavcodec/jpegxl_parser.c in gen_alias_map. |
| Buffer Overflow vulnerability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via the libavutil/imgutils.c:353:9 in image_copy_plane. |
| An unauthenticated remote attacker, who beats a race condition, can exploit a flaw in the communication servers of the CODESYS Control runtime system on Linux and QNX to trigger an out-of-bounds read via crafted socket communication, potentially causing a denial of service. |
| A security flaw has been discovered in Tenda WH450 1.0.0.18. This affects an unknown part of the file /goform/SafeMacFilter. The manipulation of the argument page results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be exploited. |
| Memory corruption when passing parameters to the Trusted Virtual Machine during the handshake. |
| Memory corruption while performing private key encryption in trusted application. |
| Memory corruption while selecting the PLMN from SOR failed list. |
| GIMP HDR File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of HDR files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27803. |
| GIMP DCM File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of DCM files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27863. |
