Total
2704 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2017-12246 | 1 Cisco | 1 Adaptive Security Appliance Software | 2024-11-21 | N/A |
| A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. | ||||
| CVE-2017-12238 | 1 Cisco | 20 C6800-16p10g, C6800-16p10g-xl, Catalyst 6000 and 17 more | 2024-11-21 | 6.5 Medium |
| A vulnerability in the Virtual Private LAN Service (VPLS) code of Cisco IOS 15.0 through 15.4 for Cisco Catalyst 6800 Series Switches could allow an unauthenticated, adjacent attacker to cause a C6800-16P10G or C6800-16P10G-XL type line card to crash, resulting in a denial of service (DoS) condition. The vulnerability is due to a memory management issue in the affected software. An attacker could exploit this vulnerability by creating a large number of VPLS-generated MAC entries in the MAC address table of an affected device. A successful exploit could allow the attacker to cause a C6800-16P10G or C6800-16P10G-XL type line card to crash, resulting in a DoS condition. This vulnerability affects Cisco Catalyst 6800 Series Switches that are running a vulnerable release of Cisco IOS Software and have a Cisco C6800-16P10G or C6800-16P10G-XL line card in use with Supervisor Engine 6T. To be vulnerable, the device must also be configured with VPLS and the C6800-16P10G or C6800-16P10G-XL line card needs to be the core-facing MPLS interfaces. Cisco Bug IDs: CSCva61927. | ||||
| CVE-2017-12237 | 1 Cisco | 301 1000 Integrated Services Router, 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router and 298 more | 2024-11-21 | 7.5 High |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS 15.0 through 15.6 and Cisco IOS XE 3.5 through 16.5 could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to how an affected device processes certain IKEv2 packets. An attacker could exploit this vulnerability by sending specific IKEv2 packets to an affected device to be processed. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. This vulnerability affects Cisco devices that have the Internet Security Association and Key Management Protocol (ISAKMP) enabled. Although only IKEv2 packets can be used to trigger this vulnerability, devices that are running Cisco IOS Software or Cisco IOS XE Software are vulnerable when ISAKMP is enabled. A device does not need to be configured with any IKEv2-specific features to be vulnerable. Many features use IKEv2, including different types of VPNs such as the following: LAN-to-LAN VPN; Remote-access VPN, excluding SSL VPN; Dynamic Multipoint VPN (DMVPN); and FlexVPN. Cisco Bug IDs: CSCvc41277. | ||||
| CVE-2017-12232 | 1 Cisco | 130 1000 Integrated Services Router, 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router and 127 more | 2024-11-21 | 6.5 Medium |
| A vulnerability in the implementation of a protocol in Cisco Integrated Services Routers Generation 2 (ISR G2) Routers running Cisco IOS 15.0 through 15.6 could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a misclassification of Ethernet frames. An attacker could exploit this vulnerability by sending a crafted Ethernet frame to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc03809. | ||||
| CVE-2017-12231 | 1 Cisco | 329 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router, 1100-4gltegb Integrated Services Router and 326 more | 2024-11-21 | 7.5 High |
| A vulnerability in the implementation of Network Address Translation (NAT) functionality in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper translation of H.323 messages that use the Registration, Admission, and Status (RAS) protocol and are sent to an affected device via IPv4 packets. An attacker could exploit this vulnerability by sending a crafted H.323 RAS packet through an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to use an application layer gateway with NAT (NAT ALG) for H.323 RAS messages. By default, a NAT ALG is enabled for H.323 RAS messages. Cisco Bug IDs: CSCvc57217. | ||||
| CVE-2017-12222 | 1 Cisco | 1 Ios Xe | 2024-11-21 | N/A |
| A vulnerability in the wireless controller manager of Cisco IOS XE could allow an unauthenticated, adjacent attacker to cause a restart of the switch and result in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted association request. An exploit could allow the attacker to cause the switch to restart. This vulnerability affects Cisco Catalyst 3650 and 3850 switches running IOS XE Software versions 16.1 through 16.3.3, and acting as wireless LAN controllers (WLC). Cisco Bug IDs: CSCvd45069. | ||||
| CVE-2017-12219 | 1 Cisco | 22 Spa 301, Spa 301 Firmware, Spa 303 and 19 more | 2024-11-21 | N/A |
| A vulnerability in the handling of IP fragments for the Cisco Small Business SPA300, SPA500, and SPA51x Series IP Phones could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to the inability to handle many large IP fragments for reassembly in a short duration. An attacker could exploit this vulnerability by sending a crafted stream of IP fragments to the targeted device. An exploit could allow the attacker to cause a DoS condition when the device unexpectedly reloads. Cisco Bug IDs: CSCve82586. | ||||
| CVE-2017-12211 | 1 Cisco | 2 Ios, Ios Xe | 2024-11-21 | N/A |
| A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640. | ||||
| CVE-2017-11580 | 1 Blipcare | 2 Wi-fi Blood Pressure Monitor, Wi-fi Blood Pressure Monitor Firmware | 2024-11-21 | N/A |
| Blipcare Wifi blood pressure monitor BP700 10.1 devices allow memory corruption that results in Denial of Service. When connected to the "Blip" open wireless connection provided by the device, if a large string is sent as a part of the HTTP request in any part of the HTTP headers, the device could become completely unresponsive. Presumably this happens as the memory footprint provided to this device is very small. According to the specs from Rezolt, the Wi-Fi module only has 256k of memory. As a result, an incorrect string copy operation using either memcpy, strcpy, or any of their other variants could result in filling up the memory space allocated to the function executing and this would result in memory corruption. To test the theory, one can modify the demo application provided by the Cypress WICED SDK and introduce an incorrect "memcpy" operation and use the compiled application on the evaluation board provided by Cypress semiconductors with exactly the same Wi-Fi SOC. The results were identical where the device would completely stop responding to any of the ping or web requests. | ||||
| CVE-2016-9954 | 1 Irregex Project | 1 Irregex | 2024-11-21 | N/A |
| The backtrack compilation code in the Irregex package (aka IrRegular Expressions) before 0.9.6 for Scheme allows remote attackers to cause a denial of service (memory consumption) via a crafted regular expression with a repeating pattern. | ||||
| CVE-2016-9814 | 1 Simplesamlphp | 2 Saml2, Simplesamlphp | 2024-11-21 | N/A |
| The validateSignature method in the SAML2\Utils class in SimpleSAMLphp before 1.14.10 and simplesamlphp/saml2 library before 1.9.1, 1.10.x before 1.10.3, and 2.x before 2.3.3 allows remote attackers to spoof SAML responses or possibly cause a denial of service (memory consumption) by leveraging improper conversion of return values to boolean. | ||||
| CVE-2016-9740 | 1 Ibm | 1 Qradar Security Information And Event Manager | 2024-11-21 | N/A |
| IBM QRadar 7.2 could allow a remote attacker to consume all resources on the server due to not properly restricting the size or amount of resources requested by an actor. IBM Reference #: 1999556. | ||||
| CVE-2016-9633 | 1 Tats | 1 W3m | 2024-11-21 | N/A |
| An issue was discovered in the Tatsuya Kinoshita w3m fork before 0.5.3-33. w3m allows remote attackers to cause a denial of service (infinite loop and resource consumption) via a crafted HTML page. | ||||
| CVE-2016-9592 | 1 Redhat | 1 Openshift | 2024-11-21 | N/A |
| openshift before versions 3.3.1.11, 3.2.1.23, 3.4 is vulnerable to a flaw when a volume fails to detach, which causes the delete operation to fail with 'VolumeInUse' error. Since the delete operation is retried every 30 seconds for each volume, this could lead to a denial of service attack as the number of API requests being sent to the cloud-provider exceeds the API's rate-limit. | ||||
| CVE-2016-9561 | 1 Ffmpeg | 1 Ffmpeg | 2024-11-21 | N/A |
| The che_configure function in libavcodec/aacdec_template.c in FFmpeg before 3.2.1 allows remote attackers to cause a denial of service (allocation of huge memory, and being killed by the OS) via a crafted MOV file. | ||||
| CVE-2016-9376 | 2 Debian, Wireshark | 2 Debian Linux, Wireshark | 2024-11-21 | N/A |
| In Wireshark 2.2.0 to 2.2.1 and 2.0.0 to 2.0.7, the OpenFlow dissector could crash with memory exhaustion, triggered by network traffic or a capture file. This was addressed in epan/dissectors/packet-openflow_v5.c by ensuring that certain length values were sufficiently large. | ||||
| CVE-2016-9375 | 2 Debian, Wireshark | 2 Debian Linux, Wireshark | 2024-11-21 | N/A |
| In Wireshark 2.2.0 to 2.2.1 and 2.0.0 to 2.0.7, the DTN dissector could go into an infinite loop, triggered by network traffic or a capture file. This was addressed in epan/dissectors/packet-dtn.c by checking whether SDNV evaluation was successful. | ||||
| CVE-2016-9374 | 2 Debian, Wireshark | 2 Debian Linux, Wireshark | 2024-11-21 | N/A |
| In Wireshark 2.2.0 to 2.2.1 and 2.0.0 to 2.0.7, the AllJoyn dissector could crash with a buffer over-read, triggered by network traffic or a capture file. This was addressed in epan/dissectors/packet-alljoyn.c by ensuring that a length variable properly tracked the state of a signature variable. | ||||
| CVE-2016-9372 | 1 Wireshark | 1 Wireshark | 2024-11-21 | N/A |
| In Wireshark 2.2.0 to 2.2.1, the Profinet I/O dissector could loop excessively, triggered by network traffic or a capture file. This was addressed in plugins/profinet/packet-pn-rtc-one.c by rejecting input with too many I/O objects. | ||||
| CVE-2016-9354 | 1 Moxa | 1 Dacenter | 2024-11-21 | N/A |
| An issue was discovered in Moxa DACenter Versions 1.4 and older. A specially crafted project file may cause the program to crash because of Uncontrolled Resource Consumption. | ||||