| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: reject login PDUs declaring more data than was received
isert_login_recv_done() records how many bytes the HCA actually placed in
the login buffer, but nothing compares that against the length the login
PDU's BHS declares. isert_rx_login_req() copies min(login_req_len,
MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then
reads the declared length back out of that buffer - for the first PDU in
iscsi_target_locate_portal(),
payload_length = ntoh24(login_req->dlength);
tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL);
and for the ones after it in iscsi_decode_text_input(), reached from
iscsi_target_do_login().
login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so
an initiator that declares more than it sends reads off the end of it,
before authentication and with the length under its control:
BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80
Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167
__asan_memcpy+0x23/0x60
kmemdup_nul+0x43/0x80
iscsi_target_locate_portal+0x48d/0x1180
iscsi_target_login_thread+0x19a9/0x3350
Allocated by task 167:
__kmalloc_cache_noprof+0x158/0x370
iscsi_target_login_thread+0x971/0x3350
which belongs to the cache kmalloc-8k of size 8192
allocated 8192-byte region
Falsifying the second login PDU instead reaches the other reader, on the
same buffer:
BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80
Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50
Workqueue: isert_login_wq iscsi_target_do_login_rx
__asan_memcpy+0x23/0x60
kmemdup_nul+0x43/0x80
iscsi_decode_text_input+0xc6/0x11c0
iscsi_target_do_login+0x261/0x1470
iscsi_target_do_login_rx+0x51d/0x7d0
iscsit over TCP is not exposed: iscsit_get_login_rx() validates the
declared length with iscsi_target_check_login_request() and then reads
exactly that many bytes off the socket, so the declared length governs
how much arrives rather than how much is copied out of an already-filled
buffer. isert does not call iscsi_target_check_login_request() at all.
Reject a login PDU whose declared DataSegmentLength exceeds what was
received, in both paths that reach isert_rx_login_req():
isert_get_login_rx() for the first login PDU and isert_login_recv_done()
for the ones after it. dlength <= login_req_len is allowed because the
received count can include up to three bytes of iSCSI padding.
Once the check is in place the copy out can no longer exceed the copy in:
the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot
exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is
login_req_len.
Like the existing short-PDU check added by 29e7b925ae6d, the reject in
isert_login_recv_done() returns without completing login_req_comp, so a
malformed subsequent PDU leaves the login to be torn down by the login
timer rather than failing immediately. The first-PDU path returns an
error and fails straight away.
Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an
initiator that sends the real key=value payload while declaring 8193 in
the BHS, on the first login PDU and on the second in separate runs. The
reported read size tracks the declared value exactly; 16384 and 61440
behave the same. Unpatched 3 of 3 runs report on each of the two paths,
patched 0 of 3 on both, run alternately in a single session, and a normal
login still completes on the patched build. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: free STAG index when TPT entry write fails
write_tpt_entry() allocates a new STAG index with c4iw_get_resource() and
bumps stats.stag.cur before programming the entry. When
write_adapter_mem() fails, it returns the error without releasing the index
or reversing the statistic. No MR is inserted into rhp->mrs, so
deregistration never reclaims it, leaking the index until device teardown.
Record whether this call allocated the index and, on a failed write, return
it to tpt_table and decrement stats.stag.cur. Key the rollback on both the
write error and that flag, not the error alone: a non-reset update carries
a caller-owned STAG that this call did not allocate and must not free. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize abort state updates
dw_edma_abort_interrupt() drops vc.lock before changing request and
status. issue_pending() can acquire the lock in that small window,
observe the old busy state, and skip starting queued descriptors. Then
the abort handler overwrites the channel status as idle, leaving the new
descriptors stranded for good.
Keep descriptor completion and the state transition in the same critical
section. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs
tegra241_cmdqv_remove() tears each VINTF down first, then calls free_irq().
Tearing a VINTF down frees vintf0 and clears cmdqv->vintfs[0]. An error in
that window makes tegra241_cmdqv_isr() read the stale slot and hand it to
tegra241_vintf0_handle_error(), which dereferences a NULL or freed pointer.
Free the IRQ before tearing the VINTFs down. free_irq() waits for in-flight
handlers to finish and blocks new ones, so no ISR can observe a VINTF as it
is torn down.
Note: a user-owned VINTF (viommu) could outlive this teardown, which unmaps
cmdqv->base and frees cmdqv->vintfs, so a later viommu close then touches
freed memory. This is neither introduced nor fixed here: a physical IOMMU
is not a pluggable device, so iommufd by design holds no reference on the
one behind a viommu, and this teardown is not expected while that viommu is
still alive. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't run the error ISR before probe sets up vintfs
__tegra241_cmdqv_probe() requests the error IRQ before it has allocated the
cmdqv->vintfs array and set cmdqv->num_vintfs. A CMDQV left enabled with a
latched error across a kexec fires the IRQ as soon as it is requested, and
tegra241_cmdqv_isr() then walks the uninitialized cmdqv->vintfs array.
Request the IRQ only after cmdqv->vintfs is allocated and zeroed, so that
a latched interrupt firing early runs the ISR against a valid array of NULL
slots that it safely skips. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate connected lane counts
The connected lane count is used by TX equalization code to index arrays
sized by UFS_MAX_LANES. Reject zero and out-of-range RX or TX lane counts
before they can be propagated. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: free EINT resources on unbind
mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for
every EINT line and installs a chained handler on the parent interrupt,
but none of these are ever released. This was harmless while the drivers
were built-in, but now that they can be built as modules and
unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings
whose chip data points at freed memory, and a chained handler that keeps
firing into that freed data.
The plain allocations in mtk_eint_do_init() already use the device-managed
devm_*() helpers, so tear the remaining resources down the same way:
register a devm action that detaches the chained handler, waits for any
in-flight handler to finish, disposes of the per-line mappings and removes
the IRQ domain. This mirrors the device-managed lifecycle adopted for the
GPIO chip and keeps the whole EINT setup self-cleaning on unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix ext PHY use-after-free on register error path
After mt7915_register_ext_phy() succeeded, a failure of the main PHY
mt7915_init_debugfs() or mt7915_coredump_register() unwound through
free_phy2, which called ieee80211_free_hw() on the ext PHY hw while it
was still registered with mac80211, since mt76_unregister_device() only
unregisters the main hw. Unregister the ext PHY (thermal + phy + hw)
first and skip the redundant free. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dsi: Drop dev_pm_opp_set_rate(0)
dev_pm_opp_set_rate(0) removes the vote specified in required-opps but
does not actually park the clock, making it run without the necessary
power backing. Drop the explicit call to it.
Every call site of ops->link_clk_disable() is followed by
pm_runtime_put(), so the power vote will be rescinded if deemed safe.
Patchwork: https://patchwork.freedesktop.org/patch/742783/ |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix valid_size extension over a shared writable mapping
When a shared writable mapping has its valid_size extended by a buffered
write or a page fault, exfat zeroes the page-cache gap below the new
valid_size. A store through the mapping can race with this zeroing and be
overwritten.
Fix this by zeroing the gap lazily. Drop ->map_pages so that every first
write fault goes through exfat_page_mkwrite(), which advances valid_size to
cover the faulting page. With fault-around enabled, a store could install a
writable PTE, skip ->page_mkwrite(), and land past valid_size without
advancing it. Extending valid_size one faulting page at a time also leaves
never-written pages in a large mapping alone.
The gap is filled with block granularity, zeroing only the not-uptodate
blocks and preserving blocks that may hold data stored through the mapping.
On the buffered-write path the invalidate lock is held and the gap is
unmapped before zeroing, so a racing store re-faults and, under the inode
lock, completes only after the gap has been zeroed and valid_size covers
it. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks
cpufreq_cpu_get() returns NULL when no cpufreq policy is associated with
the requested CPU, for example because the CPU is offline or the policy
has already been torn down. Both amd_pstate_power_supply_notifier() and
amd_pstate_profile_set() acquire a policy via cpufreq_cpu_get() and then
pass that pointer to amd_pstate_get_balanced_epp() and
amd_pstate_set_epp(), which dereference it unconditionally. A racing
CPU hotplug or driver teardown can therefore lead to a NULL pointer
dereference on either of these dynamic EPP paths.
The third cpufreq_cpu_get() caller in this file, amd_pstate_verify(),
already handles the NULL case. Bring the two new callers in line with
that pattern: return NOTIFY_OK from the power-supply notifier (matching
the other "nothing to do" exits) and -ENODEV from amd_pstate_profile_set()
(the usual cpufreq error for a missing CPU policy).
Found by code inspection; not tested on hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active
The crash issue may occur when modprobe amd_pstate_ut on intel platform.
amd_pstate_ut: 1 amd_pstate_ut_acpi_cpc_valid success!
amd_pstate_ut: 2 amd_pstate_ut_check_enabled success!
BUG: kernel NULL pointer dereference, address: 0000000000000080
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 20300 Comm: modprobe
Kdump: loaded Tainted: G O 6.6.0-0010.rc1.ctl4.x86_64 #1
Hardware name: FiberHome R2200 V5/Xeon Boards, BIOS 3.1a 02/24/2020
RIP: 0010:amd_pstate_ut_check_perf+0x141/0x280 [amd_pstate_ut]
Call Trace:
<TASK>
amd_pstate_ut_init+0x1b/0xff0 [amd_pstate_ut]
? __pfx_amd_pstate_ut_init+0x10/0x10 [amd_pstate_ut]
do_one_initcall+0x42/0x2e0
? kmalloc_trace+0x26/0x90
do_init_module+0x60/0x240
__se_sys_init_module+0x185/0x1c0
do_syscall_64+0x62/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Add state detection to amd pstate driver to prevent amd_pstate_ut driver
from testing on non-AMD platforms.
(ML: adjust title) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: bound TLV walk in mt7996_mcu_get_chip_config
The response TLV loop advanced by tlv->len without a minimum, so a
theoretical firmware response containing a zero-length TLV could spin
forever, hanging the CPU during device probe.
The u32 payload was also read without bounds checking.
Reject a short fixed field, stop on a TLV whose length underruns the
header or overruns the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RX data queuing of RRO 3.0
For RRO 3.0, RX data released from a RRO data queue should be put to
the indicator queue. The frames are processed and completed in the
context of the indicator queue NAPI, which only polls skbs queued on
the MT_RXQ_RRO_IND list; frames queued under the data queue id are
left sitting on that list until the data queue NAPI happens to run,
stalling and reordering RX data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt76x02: do not WARN on invalid rx descriptor length
The MPDU length in the rx descriptor comes from the hardware. In
monitor mode with the fcsfail filter enabled, the hardware passes up
corrupted frames, and a corrupted frame can report a length larger
than the received buffer. The bounds check correctly discards such
frames, but its WARN_ON_ONCE wrapper means any over-the-air garbage
frame taints the kernel, and panics it on the first such frame when
panic_on_warn is set.
Drop the WARN and discard the frame silently, matching what
commit c2d4c8723dbf ("mt76x2: remove some harmless WARN_ONs in tx
status and rx path") did for the neighboring rx and tx status paths.
Observed immediately on rx with an MT7612U in fcsfail monitor mode
on a busy channel. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: release the folio batch on iomap callback failures
A sashiko review of an unrelated patch points out that the folio
batch mechanism used for iomap zero range fails to release the batch
in a couple error scenarios. If either calls to ->iomap_end() or
->iomap_begin() fail, the direct return paths bypass the batch
cleanup.
The ->iomap_end() case is not a practical issue at the moment
because there is no user of the mechanism that returns an error from
this path. The ->iomap_begin() case is theoretically possible
because XFS can invoke the fill helper and error out at various
points thereafter. This subtly complicates things because XFS does
not transfer iomap_flags to the iomap data structure in the error
path.
To deal with both of these issues, first make sure to invoke the
cleanup helper in the error path for either fs callback. Second,
update the helper to clear the flag unconditionally and release the
batch so long as it is populated. This more clearly delineates the
purpose of the flag to control the I/O path and not necessarily the
status of the fbatch, so add a comment around this as well. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: dw: avoid shift-out-of-bounds when DAA assigns no devices
On an empty bus ENTDAA assigns nothing, so cmd->rx_len (the count
of addresses left unassigned) equals master->maxdevs.
The GENMASK() index master->maxdevs - cmd->rx_len - 1 then becomes -1,
which trips up UBSAN. This happens every time on boot on a Gigabyte/AMD
server:
UBSAN: shift-out-of-bounds in drivers/i3c/master/dw-i3c-master.c:905:12
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 7 UID: 0 PID: 963 Comm: (udev-worker) Not tainted 7.0.11-200.fc44.x86_64 #1 PREEMPT(lazy)
Hardware name: Giga Computing E163-Z34-AAH1-000/MZ33-DC1-000, BIOS R32_F45 04/01/2026
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_shift_out_of_bounds.cold+0xd7/0x1ab
dw_i3c_master_daa.cold+0x1b/0x96 [dw_i3c_master]
i3c_master_do_daa_ext.part.0+0x3e/0xf0 [i3c]
Skip the mask when no new device was assigned. |
| In the Linux kernel, the following vulnerability has been resolved:
md: scope memalloc_noio to allocation critical sections
Storing a memalloc_noio_save() token in mddev->noio_flags lets one task
save the token and another task restore it. With concurrent suspend sysfs
writes, task A can enter PF_MEMALLOC_NOIO, return to userspace still in
that scope, and later task B can restore A's saved token.
Avoid tying the token lifetime to mddev. Keep mddev_suspend() and
mddev_resume() only responsible for array suspension, and enter
PF_MEMALLOC_NOIO only in the MD paths that allocate memory after the array
has been suspended. Restore the token before resuming the array.
A reproducer repeatedly writes suspend_lo and suspend_hi from concurrent
workers and checks each worker's /proc/self/stat flags before and after the
sysfs write. |
| In the Linux kernel, the following vulnerability has been resolved:
md/bitmap: resume array on backlog_store() error path
backlog_store() suspends the array before checking whether a write-mostly
device exists. If no such device exists, the error path only unlocks
reconfig_mutex and leaves the array suspended, blocking subsequent I/O.
Use mddev_unlock_and_resume() to release both states. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: isp1704_charger: cancel work on remove
The USB notifier and initial VBUS detection can schedule isp->work. The
remove path unregisters the notifier and power supply, but does not wait
for queued or running work before tearing down the power supply state.
Cancel the work after unregistering the notifier. Do this before
unregistering the power supply.
This issue was found by a static analysis tool. |
