| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in weDevs Happy Addons for Elementor happy-elementor-addons allows Stored XSS.This issue affects Happy Addons for Elementor: from n/a through 3.50.0. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in BdThemes Prime Slider – Addons For Elementor bdthemes-prime-slider-lite allows Stored XSS.This issue affects Prime Slider – Addons For Elementor: from n/a through 4.6.2. |
| Oracle VM VirtualBox before 7.2.8 allows guest OS users to cause an out-of-bounds write in the host OS in pcnetReceiveNoSync in DevPCNet.cpp in the PCNet (Am79C970A) network device model. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in ExpressTech Quiz And Survey Master quiz-master-next allows Stored XSS.This issue affects Quiz And Survey Master: from n/a through 11.2.7. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WP Media Rocket Lazy Load rocket-lazy-load allows Stored XSS.This issue affects Rocket Lazy Load: from n/a through 2.4.0. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in BdThemes Element Pack Elementor Addons bdthemes-element-pack-lite allows Stored XSS.This issue affects Element Pack Elementor Addons: from n/a through 8.8.6. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in David Lingren Media LIbrary Assistant media-library-assistant allows Stored XSS.This issue affects Media LIbrary Assistant: from n/a through 3.41. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in BdThemes Element Pack Elementor Addons bdthemes-element-pack-lite allows Stored XSS.This issue affects Element Pack Elementor Addons: from n/a through 8.8.6. |
| The Bluetooth Mesh On-Demand Private Proxy solicitation handler in subsys/bluetooth/mesh/solicitation.c copies a received Solicitation PDU into a fixed 17-byte stack buffer without bounding the source length. In sol_pdu_decrypt(), out is allocated as NET_BUF_SIMPLE(17) and then filled with net_buf_simple_add_mem(out, in->data, in->len); net_buf_simple_add() guards its tailroom only with __ASSERT_NO_MSG, which is compiled out in production builds, so when in->len > 17 the underlying memcpy writes attacker-controlled bytes past the 17-byte stack buffer. The copy occurs before any decryption or authentication, so no key material is required to trigger it.
The oversized length arises because the mesh scan callback in subsys/bluetooth/mesh/adv.c calls net_buf_simple_restore() before dispatching to bt_mesh_sol_recv(), leaving buf->len covering the entire remaining advertising payload rather than just the Solicitation Service Data. After the parser locates the Service Data AD and consumes the Identification Type byte, the remaining buf->len is the 17-octet Network PDU plus any trailing advertising bytes, and prior to this fix there was no maximum-length check (only a minimum). An attacker can therefore append extra AD structures or padding after the Solicitation Service Data to make buf->len exceed 17.
bt_mesh_scan_cb() is registered directly as the BLE scan callback, so buf is raw, unauthenticated advertising data received over the air. Any device in radio range can send a non-connectable advertisement carrying a crafted mesh Proxy Solicitation to a node that has CONFIG_BT_MESH_OD_PRIV_PROXY_SRV enabled and is currently eligible to be solicited (GATT proxy disabled, On-Demand Private Proxy enabled), with no pairing, bonding, or provisioning. The result is an attacker-controlled stack overwrite — plausibly leading to remote code execution and at minimum a reliable remote denial of service. The fix trims buf->len to the spec-fixed 17 octets (dropping the PDU if fewer remain) before decryption. |
| ieee802154_decipher_data_frame() in subsys/net/l2/ieee802154/ieee802154_frame.c computed payload_len = net_pkt_get_len(pkt) - ll_hdr_len - authtag_len without first checking that the received frame is at least ll_hdr_len + authtag_len bytes long. All three variables are uint8_t, so a frame whose payload is shorter than the configured authentication tag makes the subtraction wrap around to a large value (up to 255).
The wrapped length is passed unchanged to ieee802154_decrypt_auth() and on to the CCM operation as cipher_pkt.in_len/out_buf_max, with apkt->tag pointing at frame + ll_hdr_len + payload_len. Because the receive buffer is allocated to the exact length of the frame received from the radio driver, the crypto layer then reads several hundred bytes past the end of the packet buffer and writes the same number of decrypted bytes back over it in place. The frame's authentication tag is only verified after this processing has taken place, so no key material, association or prior authentication is needed — a single crafted short frame from any device in radio range is sufficient. Frame validation in ieee802154_validate_frame() does not prevent it: a data frame is accepted with a one-byte payload.
The result is an out-of-bounds read and an out-of-bounds write of up to roughly 240 bytes into the adjacent network-buffer pool, corrupting other packets or allocator metadata and typically faulting the target. The out-of-bounds content is not attacker-chosen (it is ciphertext XOR keystream over out-of-bounds memory) and the frame is dropped when tag verification fails, so the primary impact is memory corruption and denial of service rather than information disclosure.
Exposure is limited to configurations that enable the experimental CONFIG_NET_L2_IEEE802154_SECURITY option, select a crypto device via CONFIG_NET_L2_IEEE802154_SECURITY_CRYPTO_DEV_NAME, and have established a security session with a level other than IEEE802154_SECURITY_LEVEL_NONE; with security disabled or at level NONE the tag length is zero and no underflow occurs. The fix rejects frames shorter than ll_hdr_len + authtag_len before the subtraction, and adds the matching guard on the transmit side in ieee802154_create_data_frame(). |
| Out-of-bounds write via the TLS 1.3 handshake message cache in NetX Duo in Eclipse ThreadX NetX Duo 6.5.1.202602 allows a handshake message larger than the cache writes past it and on into the rest of the session control block, which holds pointers. A malicious or compromised server can make a TLS 1.3 client produce such a message before certificate authentication completes, so no server certificate is needed to reach it. |
| This vulnerability in Veeam Backup Enterprise Manager allows an attacker to execute script in the browser of a portal user who opens a crafted link. |
| An SQL user using Impala up to and including version 4.5.2 with only SELECT permission can put JavaScript in a table alias and make it run in another user's browser when that user opens the query plan in Impala's Web UI. This is stored XSS (CWE-79). Users are recommended to upgrade to version 4.5.3. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| A remote code execution vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.20 when the optional zimbra-snmp package is installed and SNMP notifications are enabled. Due to improper sanitization of untrusted input during SNMP notification processing, an unauthenticated attacker can send specially crafted SMTP requests that may result in execution of arbitrary operating system commands as the Zimbra user. |
| The OMGF | GDPR/DSGVO Compliant, Faster Google Fonts. Easy. plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 's' Search Parameter via comments-atom Feed in all versions up to, and including, 6.3.10 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that the front-end server serves the retained .tmp file without a Content-Type or X-Content-Type-Options header, enabling MIME-sniffing browsers such as Chromium to execute the injected script — a condition present by default on many Apache and nginx/php-fpm deployments. |
| Bacularis 5.4.0 - 6.5.1 is vulnerable to Cross Site Scripting (XSS) in the Organization name field. |
| In Bacularis v1.0.0 - 6.5.1 when adding a new pool, the LabelFormat field allows for a Cross Site Scripting (XSS) payload. |
| The If-So Dynamic Content WordPress plugin before 1.10.2 does not validate the URL scheme of a request-supplied value before reflecting it into a link on an admin page, allowing attackers to execute arbitrary JavaScript in the browser of a logged-in user who opens a crafted link. |
| The All in One SEO WordPress plugin before 5.0.2.1 does not correctly determine which shortcodes are present in content derived from user input before deciding which ones to strip, allowing unauthenticated users to execute arbitrary shortcodes registered on the site. On sites upgraded from older versions the protection is disabled outright, making the issue reachable without any crafted input. |
