CVE-2021-32936 - OpenCVE

An out-of-bounds write issue exists in the DXF file-recovering procedure in the Drawings SDK (All versions prior to 2022.4) resulting from the lack of proper validation of user-supplied data. This can result in a write past the end of an allocated buffer and allow attackers to cause a denial-of-service condition or execute code in the context of the current process.

No CVSS v4.0

Attack Vector Local

Attack Complexity Low

Privileges Required None

Scope Unchanged

Confidentiality Impact High

Integrity Impact High

Availability Impact High

User Interaction Required

No CVSS v3.0

Access Vector Network

Access Complexity Medium

Authentication None

Confidentiality Impact Partial

Integrity Impact Partial

Availability Impact Partial

AV:N/AC:M/Au:N/C:P/I:P/A:P

This CVE is not in the KEV list.

Key SSVC decision points have not yet been added.

Vendors	Products
Opendesign	Drawings Sdk
Siemens	Comos Jt2go Teamcenter Visualization

Configuration 1 [-]

cpe:2.3:a:opendesign:drawings_sdk:*:*:*:*:*:*:*:*

Configuration 2 [-]

OR	cpe:2.3:a:siemens:comos::::::::
	cpe:2.3:a:siemens:jt2go::::::::
	cpe:2.3:a:siemens:teamcenter_visualization::::::::

No data.

References

Link	Providers
https://cert-portal.siemens.com/productcert/pdf/ssa-155599.pdf
https://cert-portal.siemens.com/productcert/pdf/ssa-365397.pdf
https://cert-portal.siemens.com/productcert/pdf/ssa-491245.pdf
https://us-cert.cisa.gov/ics/advisories/icsa-21-159-02
https://www.zerodayinitiative.com/advisories/ZDI-21-982/

History

No history.

MITRE

Status: PUBLISHED

Assigner: icscert

Published: 2021-06-17T00:00:00

Updated: 2024-08-03T23:33:56.172Z

Reserved: 2021-05-13T00:00:00

Link: CVE-2021-32936

Vulnrichment

No data.

NVD

Status : Modified

Published: 2021-06-17T13:15:07.747

Modified: 2023-02-14T12:15:10.893

Link: CVE-2021-32936

Redhat

No data.

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:a:opendesign:drawings_sdk:*:*:*:*:*:*:*:*", "matchCriteriaId": "FEFEE0EB-BDA4-4D1A-85B5-0D0A80EE26FA", "versionEndExcluding": "2022.4", "vulnerable": true}], "negate": false, "operator": "OR"}]}, {"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:a:siemens:comos:*:*:*:*:*:*:*:*", "matchCriteriaId": "0F0CFB85-CD4F-424C-8B9F-9289D08FA665", "versionEndExcluding": "10.4.1", "vulnerable": true}, {"criteria": "cpe:2.3:a:siemens:jt2go:*:*:*:*:*:*:*:*", "matchCriteriaId": "C811E8B2-CA0C-4A71-A803-A30C4DAF1476", "versionEndExcluding": "13.2.0.1", "vulnerable": true}, {"criteria": "cpe:2.3:a:siemens:teamcenter_visualization:*:*:*:*:*:*:*:*", "matchCriteriaId": "87BB2370-46C4-4BEC-8189-1F7FE4C1E12D", "versionEndExcluding": "13.2.0.1", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "An out-of-bounds write issue exists in the DXF file-recovering procedure in the Drawings SDK (All versions prior to 2022.4) resulting from the lack of proper validation of user-supplied data. This can result in a write past the end of an allocated buffer and allow attackers to cause a denial-of-service condition or execute code in the context of the current process."}, {"lang": "es", "value": "Se presenta un problema de escritura fuera de l\u00edmites en el procedimiento de recuperaci\u00f3n de archivos DXF en Drawings SDK (todas las versiones anteriores a 2022.4) resultando en una falta de comprobaci\u00f3n apropiada de los datos suministrados por el usuario. Esto puede resultar en una escritura m\u00e1s all\u00e1 del final de un b\u00fafer asignado y permitir a atacantes causar una condici\u00f3n de denegaci\u00f3n de servicio o ejecutar c\u00f3digo en el contexto del proceso actual"}], "id": "CVE-2021-32936", "lastModified": "2023-02-14T12:15:10.893", "metrics": {"cvssMetricV2": [{"acInsufInfo": false, "baseSeverity": "MEDIUM", "cvssData": {"accessComplexity": "MEDIUM", "accessVector": "NETWORK", "authentication": "NONE", "availabilityImpact": "PARTIAL", "baseScore": 6.8, "confidentialityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "vectorString": "AV:N/AC:M/Au:N/C:P/I:P/A:P", "version": "2.0"}, "exploitabilityScore": 8.6, "impactScore": 6.4, "obtainAllPrivilege": false, "obtainOtherPrivilege": false, "obtainUserPrivilege": false, "source": "nvd@nist.gov", "type": "Primary", "userInteractionRequired": true}], "cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "scope": "UNCHANGED", "userInteraction": "REQUIRED", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.9, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2021-06-17T13:15:07.747", "references": [{"source": "ics-cert@hq.dhs.gov", "tags": ["Patch", "Third Party Advisory"], "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-155599.pdf"}, {"source": "ics-cert@hq.dhs.gov", "tags": ["Patch", "Third Party Advisory"], "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-365397.pdf"}, {"source": "ics-cert@hq.dhs.gov", "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-491245.pdf"}, {"source": "ics-cert@hq.dhs.gov", "tags": ["Third Party Advisory", "US Government Resource"], "url": "https://us-cert.cisa.gov/ics/advisories/icsa-21-159-02"}, {"source": "ics-cert@hq.dhs.gov", "tags": ["Third Party Advisory", "VDB Entry"], "url": "https://www.zerodayinitiative.com/advisories/ZDI-21-982/"}], "sourceIdentifier": "ics-cert@hq.dhs.gov", "vulnStatus": "Modified", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-787"}], "source": "ics-cert@hq.dhs.gov", "type": "Primary"}, {"description": [{"lang": "en", "value": "CWE-787"}], "source": "nvd@nist.gov", "type": "Secondary"}]}