{"dataType": "CVE_RECORD", "dataVersion": "5.1", "cveMetadata": {"cveId": "CVE-2022-48871", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-07-16T11:38:08.921Z", "datePublished": "2024-08-21T06:10:01.859Z", "dateUpdated": "2025-05-04T08:25:12.205Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-05-04T08:25:12.205Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ntty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer\n\nDriver's probe allocates memory for RX FIFO (port->rx_fifo) based on\ndefault RX FIFO depth, e.g. 16. Later during serial startup the\nqcom_geni_serial_port_setup() updates the RX FIFO depth\n(port->rx_fifo_depth) to match real device capabilities, e.g. to 32.\n\nThe RX UART handle code will read \"port->rx_fifo_depth\" number of words\ninto \"port->rx_fifo\" buffer, thus exceeding the bounds. This can be\nobserved in certain configurations with Qualcomm Bluetooth HCI UART\ndevice and KASAN:\n\n Bluetooth: hci0: QCA Product ID :0x00000010\n Bluetooth: hci0: QCA SOC Version :0x400a0200\n Bluetooth: hci0: QCA ROM Version :0x00000200\n Bluetooth: hci0: QCA Patch Version:0x00000d2b\n Bluetooth: hci0: QCA controller version 0x02000200\n Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv\n bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2\n Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)\n Bluetooth: hci0: QCA Failed to download patch (-2)\n ==================================================================\n BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c\n Write of size 4 at addr ffff279347d578c0 by task swapper/0/0\n\n CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26\n Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)\n Call trace:\n dump_backtrace.part.0+0xe0/0xf0\n show_stack+0x18/0x40\n dump_stack_lvl+0x8c/0xb8\n print_report+0x188/0x488\n kasan_report+0xb4/0x100\n __asan_store4+0x80/0xa4\n handle_rx_uart+0xa8/0x18c\n qcom_geni_serial_handle_rx+0x84/0x9c\n qcom_geni_serial_isr+0x24c/0x760\n __handle_irq_event_percpu+0x108/0x500\n handle_irq_event+0x6c/0x110\n handle_fasteoi_irq+0x138/0x2cc\n generic_handle_domain_irq+0x48/0x64\n\nIf the RX FIFO depth changes after probe, be sure to resize the buffer."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/tty/serial/qcom_geni_serial.c"], "versions": [{"version": "f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9", "lessThan": "894681682dbefdad917b88f86cde1069140a047a", "status": "affected", "versionType": "git"}, {"version": "f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9", "lessThan": "cb53a3366eb28fed67850c80afa52075bb71a38a", "status": "affected", "versionType": "git"}, {"version": "f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9", "lessThan": "fd524ca7fe45b8a06dca2dd546d62684a9768f95", "status": "affected", "versionType": "git"}, {"version": "f9d690b6ece7ec9a6ff6b588df95a010ab2d66f9", "lessThan": "b8caf69a6946e18ffebad49847e258f5b6d52ac2", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/tty/serial/qcom_geni_serial.c"], "versions": [{"version": "5.7", "status": "affected"}, {"version": "0", "lessThan": "5.7", "status": "unaffected", "versionType": "semver"}, {"version": "5.10.165", "lessThanOrEqual": "5.10.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.15.90", "lessThanOrEqual": "5.15.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.1.8", "lessThanOrEqual": "6.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.2", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.7", "versionEndExcluding": "5.10.165"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.7", "versionEndExcluding": "5.15.90"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.7", "versionEndExcluding": "6.1.8"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.7", "versionEndExcluding": "6.2"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/894681682dbefdad917b88f86cde1069140a047a"}, {"url": "https://git.kernel.org/stable/c/cb53a3366eb28fed67850c80afa52075bb71a38a"}, {"url": "https://git.kernel.org/stable/c/fd524ca7fe45b8a06dca2dd546d62684a9768f95"}, {"url": "https://git.kernel.org/stable/c/b8caf69a6946e18ffebad49847e258f5b6d52ac2"}], "title": "tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer", "x_generator": {"engine": "bippy-1.2.0"}}, "adp": [{"metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2022-48871", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-09-10T16:05:28.910017Z"}}}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-09-12T17:32:54.202Z"}}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CISA ADP Vulnrichment", "metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2022-48871", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-09-10T16:05:28.910017Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-09-11T12:42:11.934Z"}}], "cna": {"title": "tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer", "affected": [{"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "f9d690b6ece7", "lessThan": "894681682dbe", "versionType": "git"}, {"status": "affected", "version": "f9d690b6ece7", "lessThan": "cb53a3366eb2", "versionType": "git"}, {"status": "affected", "version": "f9d690b6ece7", "lessThan": "fd524ca7fe45", "versionType": "git"}, {"status": "affected", "version": "f9d690b6ece7", "lessThan": "b8caf69a6946", "versionType": "git"}], "programFiles": ["drivers/tty/serial/qcom_geni_serial.c"], "defaultStatus": "unaffected"}, {"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "5.7"}, {"status": "unaffected", "version": "0", "lessThan": "5.7", "versionType": "semver"}, {"status": "unaffected", "version": "5.10.165", "versionType": "semver", "lessThanOrEqual": "5.10.*"}, {"status": "unaffected", "version": "5.15.90", "versionType": "semver", "lessThanOrEqual": "5.15.*"}, {"status": "unaffected", "version": "6.1.8", "versionType": "semver", "lessThanOrEqual": "6.1.*"}, {"status": "unaffected", "version": "6.2", "versionType": "original_commit_for_fix", "lessThanOrEqual": "*"}], "programFiles": ["drivers/tty/serial/qcom_geni_serial.c"], "defaultStatus": "affected"}], "references": [{"url": "https://git.kernel.org/stable/c/894681682dbefdad917b88f86cde1069140a047a"}, {"url": "https://git.kernel.org/stable/c/cb53a3366eb28fed67850c80afa52075bb71a38a"}, {"url": "https://git.kernel.org/stable/c/fd524ca7fe45b8a06dca2dd546d62684a9768f95"}, {"url": "https://git.kernel.org/stable/c/b8caf69a6946e18ffebad49847e258f5b6d52ac2"}], "x_generator": {"engine": "bippy-9e1c9544281a"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ntty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer\n\nDriver's probe allocates memory for RX FIFO (port->rx_fifo) based on\ndefault RX FIFO depth, e.g. 16. Later during serial startup the\nqcom_geni_serial_port_setup() updates the RX FIFO depth\n(port->rx_fifo_depth) to match real device capabilities, e.g. to 32.\n\nThe RX UART handle code will read \"port->rx_fifo_depth\" number of words\ninto \"port->rx_fifo\" buffer, thus exceeding the bounds. This can be\nobserved in certain configurations with Qualcomm Bluetooth HCI UART\ndevice and KASAN:\n\n Bluetooth: hci0: QCA Product ID :0x00000010\n Bluetooth: hci0: QCA SOC Version :0x400a0200\n Bluetooth: hci0: QCA ROM Version :0x00000200\n Bluetooth: hci0: QCA Patch Version:0x00000d2b\n Bluetooth: hci0: QCA controller version 0x02000200\n Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv\n bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2\n Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)\n Bluetooth: hci0: QCA Failed to download patch (-2)\n ==================================================================\n BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c\n Write of size 4 at addr ffff279347d578c0 by task swapper/0/0\n\n CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26\n Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)\n Call trace:\n dump_backtrace.part.0+0xe0/0xf0\n show_stack+0x18/0x40\n dump_stack_lvl+0x8c/0xb8\n print_report+0x188/0x488\n kasan_report+0xb4/0x100\n __asan_store4+0x80/0xa4\n handle_rx_uart+0xa8/0x18c\n qcom_geni_serial_handle_rx+0x84/0x9c\n qcom_geni_serial_isr+0x24c/0x760\n __handle_irq_event_percpu+0x108/0x500\n handle_irq_event+0x6c/0x110\n handle_fasteoi_irq+0x138/0x2cc\n generic_handle_domain_irq+0x48/0x64\n\nIf the RX FIFO depth changes after probe, be sure to resize the buffer."}], "providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2024-11-04T12:18:13.291Z"}}}, "cveMetadata": {"cveId": "CVE-2022-48871", "state": "PUBLISHED", "dateUpdated": "2024-11-04T12:18:13.291Z", "dateReserved": "2024-07-16T11:38:08.921Z", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "datePublished": "2024-08-21T06:10:01.859Z", "assignerShortName": "Linux"}, "dataVersion": "5.1"}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "5D1B38E6-531E-4689-A204-9E0178E886F5", "versionEndExcluding": "5.10.165", "versionStartIncluding": "5.7", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "E995CDA5-7223-4FDB-BAD3-81B22C763A43", "versionEndExcluding": "5.15.90", "versionStartIncluding": "5.11", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "A6AFE6C9-3F59-4711-B2CF-7D6682FF6BD0", "versionEndExcluding": "6.1.8", "versionStartIncluding": "5.16", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ntty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer\n\nDriver's probe allocates memory for RX FIFO (port->rx_fifo) based on\ndefault RX FIFO depth, e.g. 16. Later during serial startup the\nqcom_geni_serial_port_setup() updates the RX FIFO depth\n(port->rx_fifo_depth) to match real device capabilities, e.g. to 32.\n\nThe RX UART handle code will read \"port->rx_fifo_depth\" number of words\ninto \"port->rx_fifo\" buffer, thus exceeding the bounds. This can be\nobserved in certain configurations with Qualcomm Bluetooth HCI UART\ndevice and KASAN:\n\n Bluetooth: hci0: QCA Product ID :0x00000010\n Bluetooth: hci0: QCA SOC Version :0x400a0200\n Bluetooth: hci0: QCA ROM Version :0x00000200\n Bluetooth: hci0: QCA Patch Version:0x00000d2b\n Bluetooth: hci0: QCA controller version 0x02000200\n Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv\n bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2\n Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)\n Bluetooth: hci0: QCA Failed to download patch (-2)\n ==================================================================\n BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c\n Write of size 4 at addr ffff279347d578c0 by task swapper/0/0\n\n CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26\n Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)\n Call trace:\n dump_backtrace.part.0+0xe0/0xf0\n show_stack+0x18/0x40\n dump_stack_lvl+0x8c/0xb8\n print_report+0x188/0x488\n kasan_report+0xb4/0x100\n __asan_store4+0x80/0xa4\n handle_rx_uart+0xa8/0x18c\n qcom_geni_serial_handle_rx+0x84/0x9c\n qcom_geni_serial_isr+0x24c/0x760\n __handle_irq_event_percpu+0x108/0x500\n handle_irq_event+0x6c/0x110\n handle_fasteoi_irq+0x138/0x2cc\n generic_handle_domain_irq+0x48/0x64\n\nIf the RX FIFO depth changes after probe, be sure to resize the buffer."}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: tty: serial: qcom-geni-serial: corrige los l\u00edmites fuera de los l\u00edmites en el b\u00fafer RX FIFO La sonda del controlador asigna memoria para RX FIFO (puerto->rx_fifo) seg\u00fan el valor predeterminado Profundidad FIFO de RX, por ejemplo, 16. M\u00e1s adelante, durante el inicio en serie, qcom_geni_serial_port_setup() actualiza la profundidad FIFO de RX (puerto->rx_fifo_profundidad) para que coincida con las capacidades reales del dispositivo, por ejemplo, a 32. El c\u00f3digo de identificador de RX UART leer\u00e1 el n\u00famero \"puerto->rx_fifo_profundidad\" de palabras en el b\u00fafer \"port->rx_fifo\", excediendo as\u00ed los l\u00edmites. Esto se puede observar en ciertas configuraciones con el dispositivo Qualcomm Bluetooth HCI UART y KASAN: Bluetooth: hci0: QCA ID de producto: 0x00000010 Bluetooth: hci0: QCA SOC Version: 0x400a0200 Bluetooth: hci0: QCA ROM Version: 0x00000200 Bluetooth: hci0: QCA Patch Version :0x00000d2b Bluetooth: hci0: versi\u00f3n del controlador QCA 0x02000200 Bluetooth: hci0: QCA Descargando qca/htbtfw20.tlv bluetooth hci0: La carga directa del firmware para qca/htbtfw20.tlv fall\u00f3 con el error -2 Bluetooth: hci0: QCA No se pudo solicitar el archivo: qca/ htbtfw20.tlv (-2) Bluetooth: hci0: QCA Error al descargar el parche (-2) =============================== ==================================== ERROR: KASAN: losa fuera de los l\u00edmites en handle_rx_uart+ 0xa8/0x18c Escritura de tama\u00f1o 4 en la direcci\u00f3n ffff279347d578c0 mediante task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26 Nombre de hardware: Qualcomm Technologies, Inc Rob\u00f3tica RB5 (DT) Seguimiento de llamadas: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa. 8/0x18c qcom_geni_serial_handle_rx+ 0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 Si la profundidad FIFO de RX cambia despu\u00e9s sonda, aseg\u00farese de cambiar el tama\u00f1o del b\u00fafer."}], "id": "CVE-2022-48871", "lastModified": "2024-09-06T14:23:03.010", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.1, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.2, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2024-08-21T07:15:04.207", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/894681682dbefdad917b88f86cde1069140a047a"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/b8caf69a6946e18ffebad49847e258f5b6d52ac2"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/cb53a3366eb28fed67850c80afa52075bb71a38a"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/fd524ca7fe45b8a06dca2dd546d62684a9768f95"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-125"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer", "id": "2306392", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2306392"}, "csaw": false, "cvss3": {"cvss3_base_score": "7.1", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H", "status": "draft"}, "cwe": "CWE-787", "details": ["In the Linux kernel, the following vulnerability has been resolved:\ntty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer\nDriver's probe allocates memory for RX FIFO (port->rx_fifo) based on\ndefault RX FIFO depth, e.g. 16. Later during serial startup the\nqcom_geni_serial_port_setup() updates the RX FIFO depth\n(port->rx_fifo_depth) to match real device capabilities, e.g. to 32.\nThe RX UART handle code will read \"port->rx_fifo_depth\" number of words\ninto \"port->rx_fifo\" buffer, thus exceeding the bounds. This can be\nobserved in certain configurations with Qualcomm Bluetooth HCI UART\ndevice and KASAN:\nBluetooth: hci0: QCA Product ID :0x00000010\nBluetooth: hci0: QCA SOC Version :0x400a0200\nBluetooth: hci0: QCA ROM Version :0x00000200\nBluetooth: hci0: QCA Patch Version:0x00000d2b\nBluetooth: hci0: QCA controller version 0x02000200\nBluetooth: hci0: QCA Downloading qca/htbtfw20.tlv\nbluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2\nBluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)\nBluetooth: hci0: QCA Failed to download patch (-2)\n==================================================================\nBUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c\nWrite of size 4 at addr ffff279347d578c0 by task swapper/0/0\nCPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26\nHardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)\nCall trace:\ndump_backtrace.part.0+0xe0/0xf0\nshow_stack+0x18/0x40\ndump_stack_lvl+0x8c/0xb8\nprint_report+0x188/0x488\nkasan_report+0xb4/0x100\n__asan_store4+0x80/0xa4\nhandle_rx_uart+0xa8/0x18c\nqcom_geni_serial_handle_rx+0x84/0x9c\nqcom_geni_serial_isr+0x24c/0x760\n__handle_irq_event_percpu+0x108/0x500\nhandle_irq_event+0x6c/0x110\nhandle_fasteoi_irq+0x138/0x2cc\ngeneric_handle_domain_irq+0x48/0x64\nIf the RX FIFO depth changes after probe, be sure to resize the buffer.", "A vulnerability was found in the Linux kernel's qcom_geni_serial.c driver. A lack of proper size validation can lead to an out-of-bounds write caused by a mismatch between the RX FIFO buffer size and the actual RX FIFO depth after initialization. This issue can lead to memory corruption or crashes."], "mitigation": {"lang": "en:us", "value": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability."}, "name": "CVE-2022-48871", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2024-08-21T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2022-48871\nhttps://nvd.nist.gov/vuln/detail/CVE-2022-48871\nhttps://lore.kernel.org/linux-cve-announce/2024082105-CVE-2022-48871-93c2@gregkh/T"], "statement": "Red Hat Enterprise Linux is not impacted by this CVE, as this vulnerability does not affect the specific versions or configurations of the Linux kernel used in its distributions. This ensures that users of Red Hat Enterprise Linux are not exposed to the potential risks associated with this issue and no further action or mitigation is necessary for systems running this operating system.", "threat_severity": "Important"}

{}