{"dataType": "CVE_RECORD", "dataVersion": "5.1", "cveMetadata": {"cveId": "CVE-2025-39909", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2025-04-16T07:20:57.146Z", "datePublished": "2025-10-01T07:44:32.936Z", "dateUpdated": "2025-10-01T07:44:32.936Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-10-01T07:44:32.936Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters()\n\nPatch series \"mm/damon: avoid divide-by-zero in DAMON module's parameters\napplication\".\n\nDAMON's RECLAIM and LRU_SORT modules perform no validation on\nuser-configured parameters during application, which may lead to\ndivision-by-zero errors.\n\nAvoid the divide-by-zero by adding validation checks when DAMON modules\nattempt to apply the parameters.\n\n\nThis patch (of 2):\n\nDuring the calculation of 'hot_thres' and 'cold_thres', either\n'sample_interval' or 'aggr_interval' is used as the divisor, which may\nlead to division-by-zero errors. Fix it by directly returning -EINVAL\nwhen such a case occurs. Additionally, since 'aggr_interval' is already\nrequired to be set no smaller than 'sample_interval' in damon_set_attrs(),\nonly the case where 'sample_interval' is zero needs to be checked."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["mm/damon/lru_sort.c"], "versions": [{"version": "40e983cca9274e177bd5b9379299b44d9536ac68", "lessThan": "74e391f7da7d9d5235a3cca88ee9fc18f720c75b", "status": "affected", "versionType": "git"}, {"version": "40e983cca9274e177bd5b9379299b44d9536ac68", "lessThan": "7bb675c9f0257840d33e5d1337d7e3afdd74a6bf", "status": "affected", "versionType": "git"}, {"version": "40e983cca9274e177bd5b9379299b44d9536ac68", "lessThan": "af0ae62b935317bed1a1361c8c9579db9d300e70", "status": "affected", "versionType": "git"}, {"version": "40e983cca9274e177bd5b9379299b44d9536ac68", "lessThan": "326a4b3750c71af3f3c52399ec4dbe33b6da4c26", "status": "affected", "versionType": "git"}, {"version": "40e983cca9274e177bd5b9379299b44d9536ac68", "lessThan": "711f19dfd783ffb37ca4324388b9c4cb87e71363", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["mm/damon/lru_sort.c"], "versions": [{"version": "6.0", "status": "affected"}, {"version": "0", "lessThan": "6.0", "status": "unaffected", "versionType": "semver"}, {"version": "6.1.153", "lessThanOrEqual": "6.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.6.107", "lessThanOrEqual": "6.6.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.12.48", "lessThanOrEqual": "6.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.16.8", "lessThanOrEqual": "6.16.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.17", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.0", "versionEndExcluding": "6.1.153"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.0", "versionEndExcluding": "6.6.107"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.0", "versionEndExcluding": "6.12.48"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.0", "versionEndExcluding": "6.16.8"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.0", "versionEndExcluding": "6.17"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/74e391f7da7d9d5235a3cca88ee9fc18f720c75b"}, {"url": "https://git.kernel.org/stable/c/7bb675c9f0257840d33e5d1337d7e3afdd74a6bf"}, {"url": "https://git.kernel.org/stable/c/af0ae62b935317bed1a1361c8c9579db9d300e70"}, {"url": "https://git.kernel.org/stable/c/326a4b3750c71af3f3c52399ec4dbe33b6da4c26"}, {"url": "https://git.kernel.org/stable/c/711f19dfd783ffb37ca4324388b9c4cb87e71363"}], "title": "mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters()", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters()\n\nPatch series \"mm/damon: avoid divide-by-zero in DAMON module's parameters\napplication\".\n\nDAMON's RECLAIM and LRU_SORT modules perform no validation on\nuser-configured parameters during application, which may lead to\ndivision-by-zero errors.\n\nAvoid the divide-by-zero by adding validation checks when DAMON modules\nattempt to apply the parameters.\n\n\nThis patch (of 2):\n\nDuring the calculation of 'hot_thres' and 'cold_thres', either\n'sample_interval' or 'aggr_interval' is used as the divisor, which may\nlead to division-by-zero errors. Fix it by directly returning -EINVAL\nwhen such a case occurs. Additionally, since 'aggr_interval' is already\nrequired to be set no smaller than 'sample_interval' in damon_set_attrs(),\nonly the case where 'sample_interval' is zero needs to be checked."}], "id": "CVE-2025-39909", "lastModified": "2025-10-02T19:12:17.160", "metrics": {}, "published": "2025-10-01T08:15:33.850", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/326a4b3750c71af3f3c52399ec4dbe33b6da4c26"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/711f19dfd783ffb37ca4324388b9c4cb87e71363"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/74e391f7da7d9d5235a3cca88ee9fc18f720c75b"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/7bb675c9f0257840d33e5d1337d7e3afdd74a6bf"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/af0ae62b935317bed1a1361c8c9579db9d300e70"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Awaiting Analysis"}

{"bugzilla": {"description": "kernel: mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters()", "id": "2400613", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2400613"}, "csaw": false, "cvss3": {"cvss3_base_score": "5.5", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "details": ["In the Linux kernel, the following vulnerability has been resolved:\nmm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters()\nPatch series \"mm/damon: avoid divide-by-zero in DAMON module's parameters\napplication\".\nDAMON's RECLAIM and LRU_SORT modules perform no validation on\nuser-configured parameters during application, which may lead to\ndivision-by-zero errors.\nAvoid the divide-by-zero by adding validation checks when DAMON modules\nattempt to apply the parameters.\nThis patch (of 2):\nDuring the calculation of 'hot_thres' and 'cold_thres', either\n'sample_interval' or 'aggr_interval' is used as the divisor, which may\nlead to division-by-zero errors. Fix it by directly returning -EINVAL\nwhen such a case occurs. Additionally, since 'aggr_interval' is already\nrequired to be set no smaller than 'sample_interval' in damon_set_attrs(),\nonly the case where 'sample_interval' is zero needs to be checked."], "name": "CVE-2025-39909", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:rhivos:1", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat In-Vehicle Operating System 1"}], "public_date": "2025-10-01T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2025-39909\nhttps://nvd.nist.gov/vuln/detail/CVE-2025-39909\nhttps://lore.kernel.org/linux-cve-announce/2025100109-CVE-2025-39909-202c@gregkh/T"], "threat_severity": "Moderate"}

{"created": "2025-10-02T08:40:14.571655+00:00", "updated": "2025-10-02T08:40:14.571704+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}