| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: fix secure device page leak on uv_page_in() failure
In kvmppc_svm_page_in(), if uv_page_in() fails after
kvmppc_uvmem_get_page() has succeeded, the secure device page is never
released. kvmppc_uvmem_get_page() sets a bit in kvmppc_uvmem_bitmap,
allocates a kvmppc_uvmem_page_pvt struct, marks the GFN as
KVMPPC_GFN_UVMEM_PFN, and calls zone_device_page_init() which sets
refcount=1 and locks the page. The subsequent goto out_finalize skips
the *mig.dst assignment, so migrate_vma_finalize() is a no-op for the
page, and none of those resources are ever reclaimed.
Each occurrence permanently consumes one entry from the firmware-bounded
secure memory pool (kvmppc_uvmem_bitmap), leaks pvt, and leaves the GFN
marked as secure — making it unusable for the lifetime of the VM.
The twin __kvmppc_svm_page_out() already handles the analogous uv_page_out()
failure correctly with unlock_page(dpage); __free_page(dpage). Apply
the same pattern here: unlock_page() followed by put_page(), which
chains through free_zone_device_folio() into kvmppc_uvmem_folio_free()
to clear the bitmap bit, free pvt, and reset the GFN state.
Reachable whenever uv_page_in() returns an error (e.g. UV pool
exhaustion) on any POWER9/10 + Ultravisor/PEF system. |
| The ElementsReady Addons for Elementor WordPress plugin through 6.7.2 does not perform authorization checks that halt execution in several of its settings-save handlers, allowing users with subscriber-level access and above to overwrite the ElementsReady Addons for Elementor WordPress plugin through 6.7.2's stored settings, including its stored API credentials and its feature and template configuration. |
| The iPOSpays Payment Gateway for WooCommerce WordPress plugin before 1.4.7 does not verify that a payment was actually completed before recording an order as paid, allowing unauthenticated users to mark any unpaid order as paid and to rewrite its total. |
| The Blaze Demo Importer WordPress plugin before 1.0.17 does not sanitize uploaded SVG files and registers the SVG MIME type for the WordPress media library unconditionally, allowing authenticated users with the Author role or higher to upload a crafted SVG that executes arbitrary JavaScript in the browser of any user who opens the file. |
| A flaw has been found in eremef bandcamp-player up to 1.8.33-beta. The impacted element is an unknown function of the file database.ts of the component Remote Control Server. Executing a manipulation of the argument remoteEnabled can lead to missing authentication. The attack may be launched remotely. Upgrading to version 1.8.34-beta is sufficient to resolve this issue. This patch is called ccba99b66bc61acf46e4a332034799d7452ddea6. Upgrading the affected component is advised. |
| The SiteOrigin Widgets Bundle plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.74.3 via the get_instance_css function. This makes it possible for authenticated attackers, with contributor-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. The widget's normal update()/sanitize_field_input() pipeline — which would reject non-hex color values — is bypassed entirely because the [siteorigin_widget] shortcode handler calls $the_widget->widget() directly on the attacker-supplied decoded JSON instance. |
| The Groundhogg — CRM, Newsletters, and Marketing Automation plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.9 This is due to a missing ownership and capability check on the `user` parameter within the `process_edit()` function, which allows any authenticated user with the `edit_contacts` capability to reassign a contact record's linked WordPress user ID to any arbitrary account without requiring the `edit_users` or `promote_users` capabilities. This makes it possible for authenticated attackers, with sales_rep-level access and above, to escalate their privileges to administrator by linking a contact to an administrator's WordPress user ID, then creating a note containing the `{auto_login_link}` replacement tag to trigger generation of a valid auto-login permissions-key URL for the administrator-linked contact, and finally visiting that URL to authenticate as the targeted administrator. The auto-login URL is stored in the note content and is readable back by the attacker via the `view_notes` and `add_notes` capabilities that the sales_rep role holds by default. |
| The WP Directory Kit plugin for WordPress is vulnerable to time-based SQL Injection via 'display_name' Profile Field (Second-Order) in all versions up to, and including, 1.5.9 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is a second-order injection: a Subscriber stores a display_name containing a single quote via their own profile, which WordPress preserves verbatim; the payload is then triggered when WdkCachedUserEditor::update_listings_user_editor() re-reads that stored value and passes it unsanitized to the SQL sink. |
| MISP contains a vulnerability in its server settings lookup mechanism that allows an authenticated user to retrieve sensitive configuration data that should have been redacted.
The settings lookup function resolves a dotted setting name to a node in the configuration tree. When a branch name (such as Security, MISP, or Plugin) is supplied instead of a specific leaf setting, the function returns the entire sub-tree. Because a branch node does not carry a redaction flag, the redaction check in the settings retrieval endpoint is bypassed, and the full branch contents are returned to the caller. This exposes sensitive values including the security salt, Redis connection passwords, and plugin API keys.
A second endpoint that edits server settings similarly reads the entire configuration store when a branch name is resolved, returning all settings to the caller.
The impact is disclosure of sensitive server configuration secrets to any user who can access the server settings endpoints.
Affected versions: <2.5.48. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM teardown ordering
trusted_tpm_exit() drops the TPM chip reference and frees the digest
array before unregistering the trusted key type. key_type_lookup()
holds key_types_sem for reading until the key operation finishes, while
unregister_key_type() takes it for writing. It therefore provides the
synchronization point that must precede backend teardown.
The current order permits this interleaving:
CPU 0 CPU 1
trusted_tpm_exit() key_type_lookup("trusted")
put_device(&chip->dev) trusted_tpm_seal()
kfree(digests) pcrlock()
unregister_key_type() tpm_pcr_extend(..., digests)
CPU 1 can consequently dereference the freed digest array. The chip can
also be released before callbacks stop using it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200
Read of size 2 at addr ffff88810872d000 by task poc/89
Call Trace:
tpm_pcr_extend+0x1f0/0x200
pcrlock+0x42/0x70 [trusted]
trusted_tpm_seal+0x1b6/0x570 [trusted]
trusted_instantiate+0x293/0x340 [trusted]
__key_instantiate_and_link+0xb2/0x2b0
__key_create_or_update+0x61e/0xb50
__do_sys_add_key+0x1b8/0x310
Allocated by task 88:
__kmalloc_noprof+0x1a7/0x490
do_one_initcall+0xa1/0x390
do_init_module+0x2df/0x840
Freed by task 90:
kfree+0x131/0x3c0
trusted_tpm_exit+0x59/0xa0 [trusted]
__do_sys_delete_module+0x346/0x510
Move unregister_key_type() before releasing either resource. This stops
new lookups and waits for in-flight key operations to finish before the
backend state is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: remove flawed WARN_ON_ONCE from nfsd_mode_check
The header for commit e75b23f9e323 ("nfsd: check d_can_lookup in
fh_verify of directories") details the assumption that justified
adding the WARN_ON_ONCE to nfsd_mode_check(), that assumption is
invalid (in the case of NFS reexport).
When NFSD exports an NFS filesystem it is very possible for
nfsd_mode_check() to encounter a @dentry that doesn't have
i_op->lookup (see nfs_fhget()'s NFS_ATTR_FATTR_MOUNTPOINT and
NFS_ATTR_FATTR_V4_REFERRAL handling, and d_flags_for_inode()).
So remove nfsd_mode_check()'s WARN_ON_ONCE(). The nfserr_notdir
return on that branch must stay. It guards the subsequent
lookup_one_unlocked() -> __lookup_slow() path, which calls
inode->i_op->lookup() with no NULL check, so returning nfserr_notdir
is what keeps a client LOOKUP into such a @dentry from dereferencing
a NULL method pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd, nfsd: RCU-protect nlmsvc_ops dispatch
nlmsvc_ops is published by nfsd_lockd_init() and cleared by
nfsd_lockd_shutdown() with plain stores, while lockd dereferences
it unguarded from dispatch sites in fs/lockd/svcsubs.c. The pointer
targets nfsd's .rodata and the fopen/fclose callbacks live in nfsd's
.text, so a stale load after rmmod nfsd results in either a NULL
deref or a module-text use-after-free.
Declare nlmsvc_ops as __rcu, publish via rcu_assign_pointer(), clear
via RCU_INIT_POINTER() + synchronize_rcu(). Add a struct module
*owner field to nlmsvc_binding and pin the module across indirect
calls with try_module_get/module_put. When the binding is torn down,
fall back to fput() to avoid leaking struct file references. |
| A vulnerability was determined in DeepPavlov up to 1.7.0. This affects the function MultiTaskPipelinePreprocessor.__init__ of the file deeppavlov/models/preprocessors/multitask_preprocessor.py. This manipulation of the argument preprocessor causes code injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| The Simple Membership plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'country' parameter in all versions up to, and including, 4.8.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Unauthenticated attackers may also exploit this vulnerability when the plugin's Enable Free Membership feature is turned on, as it permits anonymous front-end registration and profile submission. |
| The JetFormBuilder — Dynamic Blocks Form Builder plugin for WordPress is vulnerable to Reflected DOM-Based Cross-Site Scripting via the '<attacker-chosen query var name matching the preset's query_var setting>' parameter in all versions up to, and including, 3.6.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This is only exploitable on pages embedding a form that has a text field configured with a query_var Dynamic Preset and a data-jfb-macro or JFB_FIELD:: macro reference targeting that field, both of which are standard, documented plugin features. |
| The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Insecure Direct Object Reference / Missing Authorization in versions up to, and including, 5.7.2. This is due to the publicly reachable steps__start and steps__load_step routes accepting a params[presets][order_item_id] value that is copied verbatim into the booking object without verifying that the referenced order item belongs to the current customer, is a bundle item, is paid, or has remaining capacity — the is_bundle_scheduling() bundle discriminator is a mere !empty(order_item_id) truthiness check, and the code flow explicitly removes the customer and payment steps when this is truthy (the source even carries a TODO acknowledging the missing validation). This makes it possible for unauthenticated attackers to create approved appointments against other customers' order items and to read those customers' names, email addresses, and order codes returned in the booking confirmation. |
| An Improper Privilege Management vulnerability [CWE-269] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.11, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiPAM 1.6.0, FortiPAM 1.5 all versions, FortiPAM 1.4 all versions, FortiPAM 1.3 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions may allow an authenticated administrator to bypass the trusted host policy via crafted CLI command. |
| VOCALOID6 Editor provided by Yamaha Corporation improperly restricts XML external entity references. Loading a specially crafted project file may the product to initiate unintended communication, potentially leading to the leak of sensitive information from the device where the product is installed or resulting in a denial-of-service (DoS) condition. |
| The Post Export Import with Media plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.17.1 via the 'file_path' parameter parameter. This makes it possible for authenticated attackers, with administrator-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. This requires the attacker to upload a crafted ZIP archive containing a media_metadata.json file with path traversal sequences in the file_path field while specifying an allowed file extension for the destination filename to bypass the extension guard introduced in version 1.13.2. |
| MobaXterm Personal Edition (Portable) 26.4 GA extracts the CygUtils64.plugin file without first verifying its integrity. A local attacker with write permissions on this file can replace the ‘bin/cygwin1.dll’ library contained within it with a malicious library. When the victim opens a Local Shell session or uses a Cygwin-based function, the application extracts the component and loads the tampered library, executing code with the victim’s permissions. Exploitation requires write access to the plugin and does not, in itself, involve privilege escalation. |
