| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: ar0521: don't overflow when checking PLL values
The PLL checks are comparing 64 bit integers with 32 bit
ones, as reported by Coverity. Depending on the values of
the variables, this may underflow.
Fix it ensuring that both sides of the expression are u64. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Detect when STB is not available
Loading the amd_pmc module as:
amd_pmc enable_stb=1
...can result in the following messages in the kernel ring buffer:
amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340
Further debugging reveals that this occurs when the requests for
S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0,
indicating that the STB is inaccessible. To prevent the ioremap
warning and provide clarity to the user, handle the invalid address
and display an error message. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: fix fault at system suspend if device was already runtime suspended
If the device was already runtime suspended then during system suspend
we cannot access the device registers else it will crash.
Also we cannot access any registers after dwc3_core_exit() on some
platforms so move the dwc3_enable_susphy() call to the top. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: Fix KMSAN warning in decode_getfattr_attrs()
Fix the following KMSAN warning:
CPU: 1 UID: 0 PID: 7651 Comm: cp Tainted: G B
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
=====================================================
=====================================================
BUG: KMSAN: uninit-value in decode_getfattr_attrs+0x2d6d/0x2f90
decode_getfattr_attrs+0x2d6d/0x2f90
decode_getfattr_generic+0x806/0xb00
nfs4_xdr_dec_getattr+0x1de/0x240
rpcauth_unwrap_resp_decode+0xab/0x100
rpcauth_unwrap_resp+0x95/0xc0
call_decode+0x4ff/0xb50
__rpc_execute+0x57b/0x19d0
rpc_execute+0x368/0x5e0
rpc_run_task+0xcfe/0xee0
nfs4_proc_getattr+0x5b5/0x990
__nfs_revalidate_inode+0x477/0xd00
nfs_access_get_cached+0x1021/0x1cc0
nfs_do_access+0x9f/0xae0
nfs_permission+0x1e4/0x8c0
inode_permission+0x356/0x6c0
link_path_walk+0x958/0x1330
path_lookupat+0xce/0x6b0
filename_lookup+0x23e/0x770
vfs_statx+0xe7/0x970
vfs_fstatat+0x1f2/0x2c0
__se_sys_newfstatat+0x67/0x880
__x64_sys_newfstatat+0xbd/0x120
x64_sys_call+0x1826/0x3cf0
do_syscall_64+0xd0/0x1b0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The KMSAN warning is triggered in decode_getfattr_attrs(), when calling
decode_attr_mdsthreshold(). It appears that fattr->mdsthreshold is not
initialized.
Fix the issue by initializing fattr->mdsthreshold to NULL in
nfs_fattr_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvbdev: prevent the risk of out of memory access
The dvbdev contains a static variable used to store dvb minors.
The behavior of it depends if CONFIG_DVB_DYNAMIC_MINORS is set
or not. When not set, dvb_register_device() won't check for
boundaries, as it will rely that a previous call to
dvb_register_adapter() would already be enforcing it.
On a similar way, dvb_device_open() uses the assumption
that the register functions already did the needed checks.
This can be fragile if some device ends using different
calls. This also generate warnings on static check analysers
like Coverity.
So, add explicit guards to prevent potential risk of OOM issues. |
| In the Linux kernel, the following vulnerability has been resolved:
media: s5p-jpeg: prevent buffer overflows
The current logic allows word to be less than 2. If this happens,
there will be buffer overflows, as reported by smatch. Add extra
checks to prevent it.
While here, remove an unused word = 0 assignment. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: prevent NULL pointer dereference if ATIF is not supported
acpi_evaluate_object() may return AE_NOT_FOUND (failure), which
would result in dereferencing buffer.pointer (obj) while being NULL.
Although this case may be unrealistic for the current code, it is
still better to protect against possible bugs.
Bail out also when status is AE_NOT_FOUND.
This fixes 1 FORWARD_NULL issue reported by Coverity
Report: CID 1600951: Null pointer dereferences (FORWARD_NULL)
(cherry picked from commit 91c9e221fe2553edf2db71627d8453f083de87a1) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()
1. The size of the response packet is not validated.
2. The response buffer is not freed.
Resolve these issues by switching to iwl_mvm_send_cmd_status(),
which handles both size validation and frees the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data
In case the non-paged data of a SKB carries protocol header and protocol
payload to be transmitted on a certain platform that the DMA AXI address
width is configured to 40-bit/48-bit, or the size of the non-paged data
is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI
address width is configured to 32-bit, then this SKB requires at least
two DMA transmit descriptors to serve it.
For example, three descriptors are allocated to split one DMA buffer
mapped from one piece of non-paged data:
dma_desc[N + 0],
dma_desc[N + 1],
dma_desc[N + 2].
Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold
extra information to be reused in stmmac_tx_clean():
tx_q->tx_skbuff_dma[N + 0],
tx_q->tx_skbuff_dma[N + 1],
tx_q->tx_skbuff_dma[N + 2].
Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer
address returned by DMA mapping call. stmmac_tx_clean() will try to
unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf
is a valid buffer address.
The expected behavior that saves DMA buffer address of this non-paged
data to tx_q->tx_skbuff_dma[entry].buf is:
tx_q->tx_skbuff_dma[N + 0].buf = NULL;
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single();
Unfortunately, the current code misbehaves like this:
tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single();
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = NULL;
On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the
DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address
obviously, then the DMA buffer will be unmapped immediately.
There may be a rare case that the DMA engine does not finish the
pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go
horribly wrong, DMA is going to access a unmapped/unreferenced memory
region, corrupted data will be transmited or iommu fault will be
triggered :(
In contrast, the for-loop that maps SKB fragments behaves perfectly
as expected, and that is how the driver should do for both non-paged
data and paged frags actually.
This patch corrects DMA map/unmap sequences by fixing the array index
for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address.
Tested and verified on DWXGMAC CORE 3.20a |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT
In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed
to be either root or ingress. This assumption is bogus since it's valid
to create egress qdiscs with major handle ffff:
Budimir Markovic found that for qdiscs like DRR that maintain an active
class list, it will cause a UAF with a dangling class pointer.
In 066a3b5b2346, the concern was to avoid iterating over the ingress
qdisc since its parent is itself. The proper fix is to stop when parent
TC_H_ROOT is reached because the only way to retrieve ingress is when a
hierarchy which does not contain a ffff: major handle call into
qdisc_lookup with TC_H_MAJ(TC_H_ROOT).
In the scenario where major ffff: is an egress qdisc in any of the tree
levels, the updates will also propagate to TC_H_ROOT, which then the
iteration must stop.
net/sched/sch_api.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix 6 GHz scan construction
If more than 255 colocated APs exist for the set of all
APs found during 2.4/5 GHz scanning, then the 6 GHz scan
construction will loop forever since the loop variable
has type u8, which can never reach the number found when
that's bigger than 255, and is stored in a u32 variable.
Also move it into the loops to have a smaller scope.
Using a u32 there is fine, we limit the number of APs in
the scan list and each has a limit on the number of RNR
entries due to the frame size. With a limit of 1000 scan
results, a frame size upper bound of 4096 (really it's
more like ~2300) and a TBTT entry size of at least 11,
we get an upper bound for the number of ~372k, well in
the bounds of a u32. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: fix missing NOWAIT check for O_DIRECT start write
When io_uring starts a write, it'll call kiocb_start_write() to bump the
super block rwsem, preventing any freezes from happening while that
write is in-flight. The freeze side will grab that rwsem for writing,
excluding any new writers from happening and waiting for existing writes
to finish. But io_uring unconditionally uses kiocb_start_write(), which
will block if someone is currently attempting to freeze the mount point.
This causes a deadlock where freeze is waiting for previous writes to
complete, but the previous writes cannot complete, as the task that is
supposed to complete them is blocked waiting on starting a new write.
This results in the following stuck trace showing that dependency with
the write blocked starting a new write:
task:fio state:D stack:0 pid:886 tgid:886 ppid:876
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_rwsem_wait+0x1e8/0x3f8
__percpu_down_read+0xe8/0x500
io_write+0xbb8/0xff8
io_issue_sqe+0x10c/0x1020
io_submit_sqes+0x614/0x2110
__arm64_sys_io_uring_enter+0x524/0x1038
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
INFO: task fsfreeze:7364 blocked for more than 15 seconds.
Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963
with the attempting freezer stuck trying to grab the rwsem:
task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_down_write+0x2b0/0x680
freeze_super+0x248/0x8a8
do_vfs_ioctl+0x149c/0x1b18
__arm64_sys_ioctl+0xd0/0x1a0
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a
blocking grab of the super block rwsem if it isn't set. For normal issue
where IOCB_NOWAIT would always be set, this returns -EAGAIN which will
have io_uring core issue a blocking attempt of the write. That will in
turn also get completions run, ensuring forward progress.
Since freezing requires CAP_SYS_ADMIN in the first place, this isn't
something that can be triggered by a regular user. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp i2c: handle NULL header address
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow()
There are code paths from which the function is called without holding
the RCU read lock, resulting in a suspicious RCU usage warning [1].
Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire
the RCU read lock before calling
l3mdev_master_upper_ifindex_by_index_rcu().
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/361:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
lockdep_rcu_suspicious.cold+0x4f/0xd6
dev_get_by_index_rcu+0x1d3/0x210
l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0
ip_tunnel_bind_dev+0x72f/0xa00
ip_tunnel_newlink+0x368/0x7a0
ipgre_newlink+0x14c/0x170
__rtnl_newlink+0x1173/0x19c0
rtnl_newlink+0x6c/0xa0
rtnetlink_rcv_msg+0x3cc/0xf60
netlink_rcv_skb+0x171/0x450
netlink_unicast+0x539/0x7f0
netlink_sendmsg+0x8c1/0xd80
____sys_sendmsg+0x8f9/0xc20
___sys_sendmsg+0x197/0x1e0
__sys_sendmsg+0x122/0x1f0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| A cross-site scripting (XSS) vulnerability in LemonLDAP::NG before 2.20.1 allows remote attackers to inject arbitrary web script or HTML via the url parameter of the upgrade session confirmation page (upgradeSession / forceUpgrade) if the "Upgrade session" plugin has been enabled by an admin |
| An issue was discovered in LemonLDAP::NG before 2.20.1. An Improper Check during session refresh allows an authenticated user to raise their authentication level if the admin configured an "Adaptative authentication rule" with an increment instead of an absolute value. |
| Tornado is a Python web framework and asynchronous networking library. The algorithm used for parsing HTTP cookies in Tornado versions prior to 6.4.2 sometimes has quadratic complexity, leading to excessive CPU consumption when parsing maliciously-crafted cookie headers. This parsing occurs in the event loop thread and may block the processing of other requests. Version 6.4.2 fixes the issue. |
| GNOME libsoup before 3.6.1 has an infinite loop, and memory consumption. during the reading of certain patterns of WebSocket data from clients. |
| GNOME libsoup before 3.6.1 allows a buffer overflow in applications that perform conversion to UTF-8 in soup_header_parse_param_list_strict. There is a plausible way to reach this remotely via soup_message_headers_get_content_type (e.g., an application may want to retrieve the content type of a request or response). |
| GNOME libsoup before 3.6.0 allows HTTP request smuggling in some configurations because '\0' characters at the end of header names are ignored, i.e., a "Transfer-Encoding\0: chunked" header is treated the same as a "Transfer-Encoding: chunked" header. |
