| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix TOCTOU race between smc_listen_out() and listener close
smc_listen_out() reads lsmc->sk.sk_state without the listener lock,
then acquires lock_sock_nested() only after the check passes. This
opens a window where smc_close_active() can transition the listener
to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept
queue, and release the lock, all between the lockless read and the
delayed lock acquisition:
smc_listen_work (smc_hs_wq) smc_close_active()
------------------------------- -------------------------
release_sock(child)
if (sk_state == SMC_LISTEN) TRUE
lock_sock(listener)
sk_state = SMC_CLOSED
smc_close_cleanup_listen()
release_sock(listener)
flush_work(tcp_listen_work)
lock_sock_nested(listener)
smc_accept_enqueue(listener, child) /* child enqueued on dead listener */
smc_close_active() flushes only tcp_listen_work. Work items already
dispatched onto smc_hs_wq for the CLC handshake continue running
unguarded. smc_accept_enqueue() takes a sock_hold() on the child that
is never released, so the child smc_sock, its clcsock, and the
reference all leak. A remote peer that opens TCP connections while the
server calls close() can exhaust kernel memory.
Move lock_sock_nested() to before the sk_state check so that the test
and the enqueue are atomic under the listener lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/openvswitch: check Ethernet header length in key_extract()
When a packet arrives on an ARPHRD_NONE device (e.g. TUN),
ovs_flow_key_extract() trusts the user-provided skb->protocol field: if
it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and
key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes
of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes
for MAC addresses and parse_ethertype() pulls 2 more, either of which
triggers a kernel BUG in __skb_pull() when the linear area is too small.
kernel BUG at include/linux/skbuff.h:2848!
RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933
ovs_flow_key_extract+0x419/0xa70
ovs_vport_receive+0x222/0x390
netdev_frame_hook+0x3e0/0x630
tun_get_user+0x2d0c/0x38e0
Fixed by calling check_header() in key_extract() before accessing the
Ethernet header. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix type confusion in notification logic
Sashiko reports:
At the start of the loop in pmbus_notify(), the code unconditionally casts
every attribute to a struct sensor_device_attribute:
drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() {
for (i = 0; i < data->num_attributes; i++) {
struct device_attribute *da = to_dev_attr(data->group.attrs[i]);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int index = attr->index;
...
}
However, data->group.attrs can contain other types like struct
pmbus_samples_reg or struct pmbus_sensor, which only embed a base
struct device_attribute.
If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting
it to struct sensor_device_attribute and reading the index field appears
to access memory past the end of the allocation, which might trigger a
slab-out-of-bounds read.
Additionally, if da is a struct pmbus_sensor, casting it causes the index
field to overlap with the page, phase, and reg fields. Could this produce
a garbage mask on little-endian systems that spuriously matches the target
reg, page, and flags during an alert?
Fix the problem by using struct sensor_device_attr in struct pmbus_sensor
and struct pmbus_label. Since those attributes never trigger a
notification, set the value of attr->index to -1 for them. Use this value
to distinguish from boolean attributes which _can_ trigger a notification
and use the index field to encode mask, page, and register values. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost_iotlb: bound map allocation in add_range
vhost_iotlb_add_range_ctx() only retires an old entry when the table
has a non-zero limit, has exactly reached that limit and has
VHOST_IOTLB_FLAG_RETIRE set. Non-retiring tables can keep allocating
entries after reaching their configured limit.
Existing vhost devices allocate their IOTLB with max_iotlb_entries from
vhost.c, which defaults to 2048 and is tunable by module parameter. Use
the caller-provided limit at the allocation point instead of adding a
separate default in the common IOTLB helper, and reject non-positive
values in vhost paths that can report an error.
Other vhost IOTLB users should not create zero-limit tables when entries
can be populated from userspace or guest-controlled requests. Add
caller-side max_iotlb_entries parameters for mlx5 vDPA, VDUSE and
vhost-vDPA. Reject non-positive VDUSE and vhost-vDPA values, and require
at least two entries for vdpa_sim and mlx5 vDPA paths that install
full-range mappings, since those mappings are split into two IOTLB
entries.
Handle full-range mappings in the common helper by checking that the
IOTLB can hold both split entries before inserting the first half. This
avoids returning an error after leaving a half mapping behind.
When the table is full, keep the existing retire behavior for retiring
tables and return -ENOSPC for non-retiring tables. Reuse the retired map
node instead of freeing it and allocating a replacement, so a stream of
IOTLB updates cannot keep forcing GFP_ATOMIC allocations after the table
has reached its limit. If a zero-limit IOTLB still reaches the common
helper, treat it as a configuration error and return -EINVAL.
I found this bug myself, though the patch was written with AI assistance. |
| A flaw was found in CRI-O. The fix for a previous vulnerability (CVE-2022-4318) was incorrect, allowing it to be bypassed. An attacker capable of setting environment variables on a container can inject a newline character into the HOME environment variable. This issue allows the addition of arbitrary lines into /etc/passwd by use of a specially crafted environment variable. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amxdna: Fix page-insertion errors in amdxdna_insert_pages()
Two error paths in amdxdna_insert_pages() called vma->vm_ops->close(vma)
before returning an error code to the caller. This is incorrect:
amdxdna_gem_obj_mmap() registers an HMM interval notifier before calling
amdxdna_insert_pages(), and on a hard error it jumps to hmm_unreg to undo
that registration. Calling vm_ops->close() manually — which drops the
shmem pages_pin_count and the GEM object reference that backs the VMA —
before the mmap syscall has even returned causes those resources to be
released while the VMA is still alive. The kernel VMA teardown will call
vm_ops->close() a second time when the process later unmaps the range,
producing a reference count underflow.
Replace both hard-error returns with a deferred-fault approach that keeps
the VMA alive and retries page insertion through the HMM range-fault path. |
| SAP S/4HANA (Private Cloud) uses a third-party component that contains a Regular Expression Denial of Service (ReDoS) vulnerability. An unauthenticated attacker could supply specially crafted input that triggers excessive processing within the affected functionality. Successful exploitation could exhaust system resources and make the service unavailable, resulting in a high impact on availability. There is no impact on confidentiality and integrity. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix skb length accounting after XDP frag adjustment
veth exposes non-linear skb fragments through an xdp_buff. If an XDP
program adjusts the fragment area, veth_xdp_rcv_skb() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size, and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
Additionally, bpf_xdp_pull_data() can advance data_end while leaving
frags present. The skb is then still non-linear, so the old
__skb_put(skb, off) triggers SKB_LINEAR_ASSERT().
Use skb_set_tail_pointer() and update skb->len explicitly instead,
following bpf_prog_run_generic_xdp(). Unlike __skb_put(),
skb_set_tail_pointer() does not require a linear skb.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. A forced-tailroom reproducer also exercises
bpf_xdp_pull_data() with frags still present; the old code triggers
SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs. |
| In the Linux kernel, the following vulnerability has been resolved:
net: smc: fix splice entry lifetime imbalance in smc_rx_splice
smc_rx_splice() passes pages to splice_to_pipe() before taking the
references that cover the lifetime of each splice entry. In the
VM-backed RMB path, splice_to_pipe() may drop unqueued entries through
smc_rx_spd_release(), while queued entries are released later via the
pipe buffer callback.
The old post-splice accounting also derives the number of queued VM pages
from an offset mutated while building the descriptor, and a multi-page
splice pairs one sock_hold() with multiple sock_put() calls.
Take the page and socket references for every candidate entry before
splice_to_pipe(), and drop the matching private state, page reference,
and socket reference from smc_rx_spd_release() for entries that never
get queued. This fixes a refcount imbalance that can underflow page
refcounts and trigger a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: stop estimator after disabled calc phase
IPVS estimator kthread 0 starts with zeroed chain and tick limits until
its initial calculation phase completes. If network namespace teardown
clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return
without installing positive limits.
The kthread can then continue into its main loop and drain
est_temp_list with zero chain_max, tick_max and est_max_count values.
Each enqueue consumes one available tick row, but est_count never
reaches the zero est_max_count value. After all rows are consumed, the
row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes
past the ticks and tick_len arrays.
Exit kthread 0 after the calculation phase if the kthread is stopping or
IPVS has been disabled. That keeps temporary estimators from being
drained after the limits failed to initialize.
Estimator kthreads can now self-exit before teardown or reload stops
kd->task. Keep an extra task reference after creation and release it
with kthread_stop_put(), so kd->task remains valid until the stop paths
consume that reference. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: ax88179_178a: fix skb leak in ax88179_tx_fixup()
When the interface has NETIF_F_SG enabled and skb_linearize() fails in
ax88179_tx_fixup(), the function returns NULL without freeing the skb.
usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop
(info->flags does not set FLAG_MULTI_PACKET for this driver), jumping
to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`.
Because tx_fixup() returned NULL, the local skb variable in
usbnet_start_xmit() is NULL, so the original skb is never freed — a
memory leak on every TX frame whose linearization fails (i.e. under
memory pressure).
Free the skb before returning, matching the error handling already used
for the pskb_expand_head() failure path in the same function. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Skip sub-disable teardown for never-linked sub-schedulers
A sub-scheduler enable can fail before scx_link_sched() links the sched into
the hierarchy, e.g. when the parent is already being disabled, and cleanup
still runs the full scx_sub_disable().
That is racy against root disable: drain_descendants() is the only ordering
between a sub's disable-time task walk and root disable's all-task teardown,
and an unlinked sub is invisible to it. Root's teardown can thus run between
the never-linked sub's drain and its walk, exiting every task to no
scheduler.
The walk then trips the membership WARN and re-homes the exited tasks onto
the dying hierarchy, a use-after-free.
Skip the cgroup ownership reset and the task walk if @sch was never linked,
indicated by the empty ->sibling as unlinking only happens later in the same
function. The membership WARN remains valid: a linked sub is always waited
on by an ancestor's drain. |
| Server-Side Request Forgery (SSRF) in Avro SerDe schema resolution in Apache Hive before 4.2.1 allows an authenticated remote attacker with CREATE TABLE privilege to cause the Hive server to fetch an attacker-controlled URL when resolving the avro.schema.url table property on an Avro table that is subsequently queried. This can expose cloud instance metadata, internal network services, or local server files to the Hive process identity. Users are recommended to upgrade to version 4.2.1, which fixes this issue.
Attacker access requirements:
* Network access to HiveServer2 / Metastore: required (remote attacker model).
* Valid Hive authentication: required.
* CREATE TABLE (or equivalent) privilege: required, so the attacker can set avro.schema.url in table properties.
* SELECT privilege on the malicious table: not required for the creator, who can typically query their own table; any other user granted SELECT can also trigger the fetch.
* Write access to the table LOCATION: not required; the attack uses the schema URL, not the data path.
* Admin / superuser privileges: not required; an ordinary authenticated user with DDL rights is sufficient.
* External tables enabled: typically required in practice, and enabled by default in most deployments.
Detection guidance:
* Inspect metastore / Hive table metadata for Avro tables whose avro.schema.url uses unexpected schemes such as http, https, file, or ftp, or points at link-local / cloud metadata addresses (for example 169.254.169.254) or other internal hosts.
* Review HiveServer2 and Metastore logs around CREATE/ALTER TABLE and queries against Avro tables for schema-resolution failures or outbound fetches of avro.schema.url.
* Correlate CREATE TABLE / ALTER TABLE activity that sets avro.schema.url with subsequent SELECT activity on the same table, especially when the URL target is unusual for schema distribution.
* On cloud deployments, check instance / VPC flow logs and metadata service access logs for unexpected requests from Hive host identities shortly after Avro DDL or query activity. |
| A flaw was found in OpenSSH. This vulnerability, a heap out-of-bounds read, occurs during the cleanup of GSSAPI (Generic Security Service Application Programming Interface) indicators when a trailing NULL termination is missing in the auth-indicators array. A remote attacker, under specific configurations involving GSSAPI authentication and a Kerberos environment, could exploit this to cause the SSH authentication path to crash or abort. This leads to a denial of service (DoS), impacting the availability of the SSH service. |
| A flaw was found in gnutls. The PKCS#7 padding check, performed during decryption, was not constant-time. This timing side-channel could allow a remote attacker to potentially leak sensitive information about the padding bytes through observable timing differences. This vulnerability is a form of information disclosure. |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted Online Certificate Status Protocol (OCSP) response during a TLS handshake. Due to a logic error in how gnutls processes multi-record OCSP responses, a client with OCSP verification enabled may incorrectly accept a revoked server certificate, potentially leading to a compromise of trust. |
| A flaw was found in the interactive shell of the xmllint command-line tool, used for parsing XML files. When a user inputs an overly long command, the program does not check the input size properly, which can cause it to crash. This issue might allow attackers to run harmful code in rare configurations without modern protections. |
| UNIX symbolic link (symlink) following vulnerability in ilya-zlobintsev/LACT allows for local denial-of-service. This issue affects LACT: through 0.10.0. |
| hbs is an Express view engine that wraps Handlebars. Its registerAsyncHelper API bypasses Handlebars' automatic HTML escaping: an async helper returns an opaque placeholder during the first render pass, so the double-brace expression escapes only the placeholder, and after rendering hbs substitutes the placeholder with the raw callback return value without escaping it, across the cached, uncached, and layout render paths. An application that passes attacker-influenced data, for example user-supplied content from a database, into an async helper callback can therefore have arbitrary HTML and JavaScript injected into the server-rendered page, resulting in stored or reflected cross-site scripting. Versions 2.1.0 through 4.2.1 are affected, and the issue is fixed in 4.3.0, which HTML-escapes async helper output. Applications that intentionally emit raw HTML from an async helper can opt in explicitly with hbs.SafeString. Users should upgrade to 4.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Prevent subbuf order change when resizing is disabled
Because ring_buffer_subbuf_order_set() frees buffer pages, we can't
allow it when resizing is disabled. A non-consuming reader is at risk of
use-after-free (rb_advance_iter()).
Return -EBUSY on resize_disabled, matching ring_buffer_resize()
behaviour. |
