| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wasmtime is a runtime for WebAssembly. Prior to 36.0.19, 48.0.7, and 49.0.4, the Cranelift compiler backend on aarch64 can compile a Wasm br_table instruction with more than approximately 256,000 targets so that it has an incorrect conditional branch target. The branch can then jump to arbitrary other code at a user-controlled offset, allowing a user-controlled Wasm module to escape the sandbox on aarch64 engines using the default Cranelift backend. This issue is fixed in versions 36.0.19, 48.0.7, and 49.0.4. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS
frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in
the generic FC transport. This is not a local userspace or IP network
path; the attacker must be able to inject fabric traffic, for example as
a compromised switch or fabric controller, or as a same-zone N_Port on a
fabric that permits source spoofing.
The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop
counter against the 32-bit on-wire pname_count field, and did not bound
pname_count by the descriptor body already validated by the TLV walker.
A pname_count of 256 therefore wraps the counter and keeps the loop
condition true indefinitely.
Factor the shared pname_list[] walk into one helper, widen the counter
to u32, and clamp pname_count against the entries that fit in the
descriptor body before iterating. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix shrinker accounting double-subtraction on nested external pins
xe_bo_pin_external() and xe_bo_unpin_external() support nested pins,
since the underlying ttm_bo_pin()/ttm_bo_unpin() maintain a pin_count
refcount rather than a boolean. However, the shrinker accounting calls
xe_ttm_tt_account_subtract() and xe_ttm_tt_account_add() are invoked
unconditionally on every pin_external()/unpin_external() call, instead
of only on the transition into and out of the pinned state.
An external BO (dma-buf) can be pinned more than once while already
pinned, for example when it has multiple attachments/importers, each
independently calling xe_bo_pin_external(). Each such nested pin
subtracts the BO's pages from the shrinker's accounting again, even
though the BO's pages were already removed from consideration by the
first pin. Symmetrically, each nested unpin adds them back again
before the BO is actually unpinned. This desynchronizes the
shrinker's page and object counts from reality, and since they are
declared as signed long but interpreted as unsigned long in
xe_shrinker_count(), the underflow can turn into an enormous
shrinkable/purgeable page count, causing the shrinker to be invoked
excessively under memory pressure.
Guard the accounting calls with the same pin-count transition checks
already used to guard the pinned_link list maintenance, so accounting
is only updated on the outermost pin and the final unpin.
While centralizing this logic into xe_bo_account_pin()/
xe_bo_account_unpin(), also close a second, related accounting gap
affecting imported dma-bufs. For an imported bo's ttm_tt, xe's
ttm_tt_populate hook (xe_ttm_tt_populate()) early-returns without
calling xe_ttm_tt_account_add(), since TTM_TT_FLAG_EXTERNAL is set
without TTM_TT_FLAG_EXTERNAL_MAPPABLE. However, TTM core's
ttm_tt_populate() wrapper unconditionally marks the tt as populated
on driver-hook success, so ttm_tt_is_populated() still reports true
for it. xe_bo_account_pin()/xe_bo_account_unpin() trusted
ttm_tt_is_populated() as a proxy for "these pages are accounted for
by the shrinker", and would subtract/add pages for such a tt that
were never added in the first place, again underflowing the
shrinker's counts. This is reachable today via xe_bo_pin_external(),
and would have become newly reachable via the fb-pin path once this
patch routes __xe_pin_fb_vma() through xe_bo_pin_account() below, so
fix it here rather than in a later patch, to avoid a commit in this
series that introduces the regression before fixing it. Skip the
accounting for imported bos, using the same EXTERNAL &&
!EXTERNAL_MAPPABLE test xe_ttm_tt_populate()/xe_ttm_tt_unpopulate()
use to decide whether to act, via a new xe_ttm_bo_is_imported()
helper (hoisted up from its only prior use site).
v2:
- Fix the critical issue caught by Sashiko AI review: the pin-count
transition check introduced here was still bypassed by the fb-pin
path (__xe_pin_fb_vma()/__xe_unpin_fb_vma()), which could leave a
stale pinned_link entry and a permanent shrinker accounting leak
when the fb-unpin performed the true last unpin. Addressed in a
separate follow-up patch in this series rather than folded in here,
since it is a distinct bug with its own Fixes: tag.
- Drop the unneeded local "last_unpin" variable in
xe_bo_unpin_external(), restoring the original inline
bo->ttm.pin_count == 1 check; it was a no-op rename not used by any
of the new accounting helpers, and was going to be deleted again by
the follow-up patch anyway.
v3:
- Exclude imported dma-bufs from the pin/unpin shrinker accounting,
fixing another underflow caught by Sashiko AI review.
- Add a short comment on the backup-object pin site noting it's
already populated/accounted at pin time, addressing (as a
false-positive clarification, no code fix needed) a separate
Medium-severity accounting-leak concern also caught by Sashiko AI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Size page table preallocation by device address
Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for
map() interface") passed the device address to
pvr_mmu_op_context_create(), but the preallocation is still sized from
device_addr + sgt_offset with an exclusive end. The offset into the
object's pages has no place in a device-virtual range, and the exclusive
end allocates one table too many when the range ends on a table
boundary.
Count the tables from device_addr and the inclusive end of the range.
The new calculation does not take page table indices into account. This
fixes another issue with the previous implementation, where the
difference between start and end indices could underflow when a mapping
crossed a page table boundary. This would lead to the driver
preallocating a huge number of MMU pages, exhausting system memory and
triggering an out of memory panic.
[Alessio: add paragraph to point out OOM bug being fixed, cc stable] |
| Integer underflow (wrap or wraparound) in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Microsoft Account allows an authorized attacker to elevate privileges locally. |
| Integer overflow or wraparound in HID Parser Library allows an authorized attacker to elevate privileges locally. |
| Integer overflow or wraparound in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| P-Net before 1.0.3 contains an integer underflow in pf_cpm_c_data_ind(). When handling a received cyclic data frame while the consumer is in the FRUN or RUN state, the offset of the APDU status was computed as the frame length minus 4 using 16-bit arithmetic, without checking that the frame is long enough. A crafted short frame makes the offset wrap around, so the function reads outside the receive buffer. This can cause a crash (denial of service) or disclose memory content. |
| Wasmtime 46.0.0 before 48.0.6 and 49.0.0 before 49.0.3 contains a denial of service vulnerability in wasmtime-wasi-http that lets guests crash the host by sending long request URLs. Guests can use set-path-with-query with a '?' after byte 65535, overflowing a u16 index in the http crate and triggering a host panic. |
| Kafka Streams derives its stream-time clock from record timestamps. PunctuationSchedule.next() computed the next punctuation time as timestamp + (intervalsMissed + 1) * interval with no overflow check. A record with a timestamp at or near Long.MAX_VALUE advances stream time to that value, so the next stream-time punctuation overflows to a negative time. PunctuationQueue then re-queues that time and loops on it indefinitely while holding a lock, stalling the StreamThread.
Impact:
A single record is enough. The affected StreamThread stops processing, and because the record stays in the topic the hang returns on restart; an application whose partitions are all affected becomes unresponsive. Only the Streams application is affected, not the brokers or the cluster. Triggering it needs write access to a source topic whose topology uses stream-time punctuation, and a broker that stores the record: brokers from Apache Kafka 4.0.0 reject such a timestamp by default (log.message.timestamp.after.max.ms, one hour), so it is reachable only on older brokers or where that bound has been relaxed.
Mitigation:
Upgrade Kafka Streams to 4.2.2, 4.3.2, or 4.4.0. As defense in depth, keep log.message.timestamp.after.max.ms bounded on source topics and restrict write access to them.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the next punctuation time is computed with overflow-checked arithmetic (clamped to Long.MAX_VALUE), and a rescheduled punctuation is re-queued only when its time moves forward. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::FpySequencer STORE directive stack write validation the bounds check adds attacker-controlled offset and size before memcpy, allowing integer wraparound to make an out-of-range destination appear valid. When a sequence-controlled STORE directive supplies a stack offset and size whose U32 sum wraps, memcpy can write outside the sequencer stack, causing memory corruption, denial of service, and potentially code execution. This issue is fixed in version 4.2.0. |
| A flaw was found in GLib. A state confusion issue exists in g_dbus_node_info_new_for_xml() in the gio/gdbusintrospection.c file when processing malformed D-Bus introspection XML, specifically with a `node` element nested within other elements like `method`, `signal`, `property` or `arg`. This issue can cause an unsigned integer overflow and lead to an out-of-bounds read, resulting in a denial of service. |
| libsmb2 before 6.3 contains integer overflow vulnerabilities in the DCE/RPC NDR decoder in lib/dcerpc.c that allow heap out-of-bounds reads and writes. A malicious SMB server or machine-in-the-middle on unsigned connections can send crafted NetrShareEnum replies with wrapping actual_count or max_count values when clients call smb2_share_enum_async(), corrupting heap memory. |
| A 32-bit integer wraparound in the MongoDB C Driver's Windows-only Kerberos/SSPI authentication code can cause an undersized heap buffer to be allocated when an excessively long credential value is supplied in the client's connection configuration. A party able to control that client-side configuration, in conjunction with the affected authentication mechanism, can cause the driver to write outside the bounds of the allocated buffer. This may result in corruption of client process memory and denial of service of the client application. The issue affects only client builds compiled with the Windows-native authentication backend. |
| An Integer Overflow vulnerability in the DPI certificate scanner in Juniper Networks Session Smart Router allows an unauthenticated remote attacker to cause a denial of service via a specially crafted TLS server certificate. |
| An integer overflow in the remote-control
screen processing component of TeamViewer clients (Full Client, Portable and Remote
Control App) prior to version 15.83 may allow a malicious remote host to cause
a denial of service or, depending on the platform, potentially execute
arbitrary code with the privileges of the viewer process. Exploitation requires
a user to establish a remote-control session to an attacker-controlled or
compromised host. |
| In EPICS Base release 7.0.10 and prior, an integer overflow in network request processing can cause memory to be allocated with an incorrect size. Subsequent handling of attacker supplied data may result in memory corruption, denial of service, or potential remote code execution. |
| An Integer Underflow vulnerability in DhcpMessageDecoder in Juniper Networks Session Smart Router allows an attacker with local network access to cause information disclosure and a denial of service via a malicious DHCP reply. |
| In EPICS Base release 7.0.10 and prior, an improper validation of message length values during protocol parsing can trigger an integer overflow, resulting in an out-of-bounds memory write. Successful exploitation can cause process instability or denial of service. |
