| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_dsp_rproc: Add mutex protection for workqueue
The workqueue may execute late even after remoteproc is stopped or
stopping, some resources (rpmsg device and endpoint) have been
released in rproc_stop_subdevices(), then rproc_vq_interrupt()
accessing these resources will cause kennel dump.
Call trace:
virtqueue_add_split+0x1ac/0x560
virtqueue_add_inbuf+0x4c/0x60
rpmsg_recv_done+0x15c/0x294
vring_interrupt+0x6c/0xa4
rproc_vq_interrupt+0x30/0x50
imx_dsp_rproc_vq_work+0x24/0x40 [imx_dsp_rproc]
process_one_work+0x1d0/0x354
worker_thread+0x13c/0x470
kthread+0x154/0x160
ret_from_fork+0x10/0x20
Add mutex protection in imx_dsp_rproc_vq_work(), if the state is
not running, then just skip calling rproc_vq_interrupt().
Also the flush workqueue operation can't be added in rproc stop
for the same reason. The call sequence is
rproc_shutdown
-> rproc_stop
->rproc_stop_subdevices
->rproc->ops->stop()
->imx_dsp_rproc_stop
->flush_work
-> rproc_vq_interrupt
The resource needed by rproc_vq_interrupt has been released in
rproc_stop_subdevices, so flush_work is not safe to be called in
imx_dsp_rproc_stop. |
| Issue summary: An application trying to decrypt CMS messages encrypted using
password based encryption can trigger an out-of-bounds read and write.
Impact summary: This out-of-bounds read may trigger a crash which leads to
Denial of Service for an application. The out-of-bounds write can cause
a memory corruption which can have various consequences including
a Denial of Service or Execution of attacker-supplied code.
Although the consequences of a successful exploit of this vulnerability
could be severe, the probability that the attacker would be able to
perform it is low. Besides, password based (PWRI) encryption support in CMS
messages is very rarely used. For that reason the issue was assessed as
Moderate severity according to our Security Policy.
The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/platform/uv: Use alternate source for socket to node data
The UV code attempts to build a set of tables to allow it to do
bidirectional socket<=>node lookups.
But when nr_cpus is set to a smaller number than actually present, the
cpu_to_node() mapping information for unused CPUs is not available to
build_socket_tables(). This results in skipping some nodes or sockets
when creating the tables and leaving some -1's for later code to trip.
over, causing oopses.
The problem is that the socket<=>node lookups are created by doing a
loop over all CPUs, then looking up the CPU's APICID and socket. But
if a CPU is not present, there is no way to start this lookup.
Instead of looping over all CPUs, take CPUs out of the equation
entirely. Loop over all APICIDs which are mapped to a valid NUMA node.
Then just extract the socket-id from the APICID.
This avoid tripping over disabled CPUs. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
Following process will trigger an infinite loop in ubi_wl_put_peb():
ubifs_bgt ubi_bgt
ubifs_leb_unmap
ubi_leb_unmap
ubi_eba_unmap_leb
ubi_wl_put_peb wear_leveling_worker
e1 = rb_entry(rb_first(&ubi->used)
e2 = get_peb_for_wl(ubi)
ubi_io_read_vid_hdr // return err (flash fault)
out_error:
ubi->move_from = ubi->move_to = NULL
wl_entry_destroy(ubi, e1)
ubi->lookuptbl[e->pnum] = NULL
retry:
e = ubi->lookuptbl[pnum]; // return NULL
if (e == ubi->move_from) { // NULL == NULL gets true
goto retry; // infinite loop !!!
$ top
PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND
7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0
Fix it by:
1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has
been removed from 'ubi->lookuptbl'.
2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an
use-after-free problem for wl entry in ubi_wl_put_peb().
Fetch a reproducer in [Link]. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix potential race condition between napi_init and napi_enable
A race condition can happen if netdev is registered, but NAPI isn't
initialized yet, and meanwhile user space starts the netdev that will
enable NAPI. Then, it hits BUG_ON():
kernel BUG at net/core/dev.c:6423!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 417 Comm: iwd Not tainted 6.2.7-slab-dirty #3 eb0f5a8a9d91
Hardware name: LENOVO 21DL/LNVNB161216, BIOS JPCN20WW(V1.06) 09/20/2022
RIP: 0010:napi_enable+0x3f/0x50
Code: 48 89 c2 48 83 e2 f6 f6 81 89 08 00 00 02 74 0d 48 83 ...
RSP: 0018:ffffada1414f3548 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa01425802080 RCX: 0000000000000000
RDX: 00000000000002ff RSI: ffffada14e50c614 RDI: ffffa01425808dc0
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000100 R12: ffffa01425808f58
R13: 0000000000000000 R14: ffffa01423498940 R15: 0000000000000001
FS: 00007f5577c0a740(0000) GS:ffffa0169fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5577a19972 CR3: 0000000125a7a000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
rtw89_pci_ops_start+0x1c/0x70 [rtw89_pci 6cbc75429515c181cbc386478d5cfb32ffc5a0f8]
rtw89_core_start+0xbe/0x160 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22]
rtw89_ops_start+0x26/0x40 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22]
drv_start+0x42/0x100 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
ieee80211_do_open+0x311/0x7d0 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
ieee80211_open+0x6a/0x90 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
__dev_open+0xe0/0x180
__dev_change_flags+0x1da/0x250
dev_change_flags+0x26/0x70
do_setlink+0x37c/0x12c0
? ep_poll_callback+0x246/0x290
? __nla_validate_parse+0x61/0xd00
? __wake_up_common_lock+0x8f/0xd0
To fix this, follow Jonas' suggestion to switch the order of these
functions and move register netdev to be the last step of PCI probe.
Also, correct the error handling of rtw89_core_register_hw(). |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix possible memleak when register 'hctx' failed
There's issue as follows when do fault injection test:
unreferenced object 0xffff888132a9f400 (size 512):
comm "insmod", pid 308021, jiffies 4324277909 (age 509.733s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 f4 a9 32 81 88 ff ff ...........2....
08 f4 a9 32 81 88 ff ff 00 00 00 00 00 00 00 00 ...2............
backtrace:
[<00000000e8952bb4>] kmalloc_node_trace+0x22/0xa0
[<00000000f9980e0f>] blk_mq_alloc_and_init_hctx+0x3f1/0x7e0
[<000000002e719efa>] blk_mq_realloc_hw_ctxs+0x1e6/0x230
[<000000004f1fda40>] blk_mq_init_allocated_queue+0x27e/0x910
[<00000000287123ec>] __blk_mq_alloc_disk+0x67/0xf0
[<00000000a2a34657>] 0xffffffffa2ad310f
[<00000000b173f718>] 0xffffffffa2af824a
[<0000000095a1dabb>] do_one_initcall+0x87/0x2a0
[<00000000f32fdf93>] do_init_module+0xdf/0x320
[<00000000cbe8541e>] load_module+0x3006/0x3390
[<0000000069ed1bdb>] __do_sys_finit_module+0x113/0x1b0
[<00000000a1a29ae8>] do_syscall_64+0x35/0x80
[<000000009cd878b0>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fault injection context as follows:
kobject_add
blk_mq_register_hctx
blk_mq_sysfs_register
blk_register_queue
device_add_disk
null_add_dev.part.0 [null_blk]
As 'blk_mq_register_hctx' may already add some objects when failed halfway,
but there isn't do fallback, caller don't know which objects add failed.
To solve above issue just do fallback when add objects failed halfway in
'blk_mq_register_hctx'. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: rtl9300: ensure data length is within supported range
Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer'
to ensure the data length isn't within the supported range. In
particular a data length of 0 is not supported by the hardware and
causes unintended or destructive behaviour.
This limitation becomes obvious when looking at the register
documentation [1]. 4 bits are reserved for DATA_WIDTH and the value
of these 4 bits is used as N + 1, allowing a data length range of
1 <= len <= 16.
Affected by this is the SMBus Quick Operation which works with a data
length of 0. Passing 0 as the length causes an underflow of the value
due to:
(len - 1) & 0xf
and effectively specifying a transfer length of 16 via the registers.
This causes a 16-byte write operation instead of a Quick Write. For
example, on SFP modules without write-protected EEPROM this soft-bricks
them by overwriting some initial bytes.
For completeness, also add a quirk for the zero length.
[1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix race condition validating r_parent before applying state
Add validation to ensure the cached parent directory inode matches the
directory info in MDS replies. This prevents client-side race conditions
where concurrent operations (e.g. rename) cause r_parent to become stale
between request initiation and reply processing, which could lead to
applying state changes to incorrect directory inodes.
[ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to
move CEPH_CAP_PIN reference when r_parent is updated:
When the parent directory lock is not held, req->r_parent can become
stale and is updated to point to the correct inode. However, the
associated CEPH_CAP_PIN reference was not being adjusted. The
CEPH_CAP_PIN is a reference on an inode that is tracked for
accounting purposes. Moving this pin is important to keep the
accounting balanced. When the pin was not moved from the old parent
to the new one, it created two problems: The reference on the old,
stale parent was never released, causing a reference leak.
A reference for the new parent was never acquired, creating the risk
of a reference underflow later in ceph_mdsc_release_request(). This
patch corrects the logic by releasing the pin from the old parent and
acquiring it for the new parent when r_parent is switched. This
ensures reference accounting stays balanced. ] |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: gen_estimator: fix est_timer() vs CONFIG_PREEMPT_RT=y
syzbot reported a WARNING in est_timer() [1]
Problem here is that with CONFIG_PREEMPT_RT=y, timer callbacks
can be preempted.
Adopt preempt_disable_nested()/preempt_enable_nested() to fix this.
[1]
WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 __seqprop_assert include/linux/seqlock.h:221 [inline]
WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:__seqprop_assert include/linux/seqlock.h:221 [inline]
RIP: 0010:est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93
Call Trace:
<TASK>
call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747
expire_timers kernel/time/timer.c:1798 [inline]
__run_timers kernel/time/timer.c:2372 [inline]
__run_timer_base+0x648/0x970 kernel/time/timer.c:2384
run_timer_base kernel/time/timer.c:2393 [inline]
run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403
handle_softirqs+0x22c/0x710 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
run_ktimerd+0xcf/0x190 kernel/softirq.c:1043
smpboot_thread_fn+0x53f/0xa60 kernel/smpboot.c:160
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| Finance.js v4.1.0 contains a Denial of Service (DoS) vulnerability via the IRR function’s depth parameter. Improper handling of the recursion/iteration limit can lead to excessive CPU usage, causing application stalls or crashes. |
| An issue in finance.js v.4.1.0 allows a remote attacker to cause a denial of service via the seekZero() parameter. |
| The EKEN video doorbell T6 BT60PLUS_MAIN_V1.0_GC1084_20230531 periodically sends debug logs to the EKEN cloud servers with sensitive information such as the Wi-Fi SSID and password. |
| There is a memory corruption vulnerability due to an out of bounds write in XML_Serialize() when using SymbolEditor in NI Circuit Design Suite. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted .sym file. This vulnerability affects NI Circuit Design Suite 14.3.1 and prior versions. |
| Rapid7 AppSpider Pro versions below 7.5.021 suffer from a project name validation vulnerability, whereby an attacker can change the project name directly in the configuration file to a name that already exists. This issue stems from a lack of effective verification of the uniqueness of project names when editing them outside the application in affected versions. This vulnerability was remediated in version 7.5.021 of the product. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Prevent recovery work from being queued during device removal
Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini()
to ensure that no new recovery work items can be queued after device
removal has started. Previously, recovery work could be scheduled even
after canceling existing work, potentially leading to use-after-free
bugs if recovery accessed freed resources.
Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better
reflect its new behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
Add proper error checking for dmaengine_desc_get_metadata_ptr() which
can return an error pointer and lead to potential crashes or undefined
behaviour if the pointer retrieval fails.
Properly handle the error by unmapping DMA buffer, freeing the skb and
returning early to prevent further processing with invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: fix possible null-ptr-deref when parsing param
According to commit "vfs: parse: deal with zero length string value",
kernel will set the param->string to null pointer in vfs_parse_fs_string()
if fs string has zero length.
Yet the problem is that, nfs_fs_context_parse_param() will dereferences the
param->string, without checking whether it is a null pointer, which may
trigger a null-ptr-deref bug.
This patch solves it by adding sanity check on param->string
in nfs_fs_context_parse_param(). |
| In the Linux kernel, the following vulnerability has been resolved:
sched: Fix sched_numa_find_nth_cpu() if mask offline
sched_numa_find_nth_cpu() uses a bsearch to look for the 'closest'
CPU in sched_domains_numa_masks and given cpus mask. However they
might not intersect if all CPUs in the cpus mask are offline. bsearch
will return NULL in that case, bail out instead of dereferencing a
bogus pointer.
The previous behaviour lead to this bug when using maxcpus=4 on an
rk3399 (LLLLbb) (i.e. booting with all big CPUs offline):
[ 1.422922] Unable to handle kernel paging request at virtual address ffffff8000000000
[ 1.423635] Mem abort info:
[ 1.423889] ESR = 0x0000000096000006
[ 1.424227] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.424715] SET = 0, FnV = 0
[ 1.424995] EA = 0, S1PTW = 0
[ 1.425279] FSC = 0x06: level 2 translation fault
[ 1.425735] Data abort info:
[ 1.425998] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 1.426499] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1.426952] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1.427428] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000004a9f000
[ 1.428038] [ffffff8000000000] pgd=18000000f7fff403, p4d=18000000f7fff403, pud=18000000f7fff403, pmd=0000000000000000
[ 1.429014] Internal error: Oops: 0000000096000006 [#1] SMP
[ 1.429525] Modules linked in:
[ 1.429813] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc4-dirty #343 PREEMPT
[ 1.430559] Hardware name: Pine64 RockPro64 v2.1 (DT)
[ 1.431012] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.431634] pc : sched_numa_find_nth_cpu+0x2a0/0x488
[ 1.432094] lr : sched_numa_find_nth_cpu+0x284/0x488
[ 1.432543] sp : ffffffc084e1b960
[ 1.432843] x29: ffffffc084e1b960 x28: ffffff80078a8800 x27: ffffffc0846eb1d0
[ 1.433495] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 1.434144] x23: 0000000000000000 x22: fffffffffff7f093 x21: ffffffc081de6378
[ 1.434792] x20: 0000000000000000 x19: 0000000ffff7f093 x18: 00000000ffffffff
[ 1.435441] x17: 3030303866666666 x16: 66663d736b73616d x15: ffffffc104e1b5b7
[ 1.436091] x14: 0000000000000000 x13: ffffffc084712860 x12: 0000000000000372
[ 1.436739] x11: 0000000000000126 x10: ffffffc08476a860 x9 : ffffffc084712860
[ 1.437389] x8 : 00000000ffffefff x7 : ffffffc08476a860 x6 : 0000000000000000
[ 1.438036] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[ 1.438683] x2 : 0000000000000000 x1 : ffffffc0846eb000 x0 : ffffff8000407b68
[ 1.439332] Call trace:
[ 1.439559] sched_numa_find_nth_cpu+0x2a0/0x488 (P)
[ 1.440016] smp_call_function_any+0xc8/0xd0
[ 1.440416] armv8_pmu_init+0x58/0x27c
[ 1.440770] armv8_cortex_a72_pmu_init+0x20/0x2c
[ 1.441199] arm_pmu_device_probe+0x1e4/0x5e8
[ 1.441603] armv8_pmu_device_probe+0x1c/0x28
[ 1.442007] platform_probe+0x5c/0xac
[ 1.442347] really_probe+0xbc/0x298
[ 1.442683] __driver_probe_device+0x78/0x12c
[ 1.443087] driver_probe_device+0xdc/0x160
[ 1.443475] __driver_attach+0x94/0x19c
[ 1.443833] bus_for_each_dev+0x74/0xd4
[ 1.444190] driver_attach+0x24/0x30
[ 1.444525] bus_add_driver+0xe4/0x208
[ 1.444874] driver_register+0x60/0x128
[ 1.445233] __platform_driver_register+0x24/0x30
[ 1.445662] armv8_pmu_driver_init+0x28/0x4c
[ 1.446059] do_one_initcall+0x44/0x25c
[ 1.446416] kernel_init_freeable+0x1dc/0x3bc
[ 1.446820] kernel_init+0x20/0x1d8
[ 1.447151] ret_from_fork+0x10/0x20
[ 1.447493] Code: 90022e21 f000e5f5 910de2b5 2a1703e2 (f8767803)
[ 1.448040] ---[ end trace 0000000000000000 ]---
[ 1.448483] note: swapper/0[1] exited with preempt_count 1
[ 1.449047] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.449741] SMP: stopping secondary CPUs
[ 1.450105] Kernel Offset: disabled
[ 1.450419] CPU features: 0x000000,00080000,20002001,0400421b
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not ignore genmask when looking up chain by id
When adding a rule to a chain referring to its ID, if that chain had been
deleted on the same batch, the rule might end up referring to a deleted
chain.
This will lead to a WARNING like following:
[ 33.098431] ------------[ cut here ]------------
[ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260
[ 33.099217] Modules linked in:
[ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409
[ 33.099726] Workqueue: events nf_tables_trans_destroy_work
[ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260
[ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7
[ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202
[ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000
[ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000
[ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500
[ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10
[ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000
[ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0
[ 33.104872] PKRU: 55555554
[ 33.104999] Call Trace:
[ 33.105113] <TASK>
[ 33.105214] ? show_regs+0x72/0x90
[ 33.105371] ? __warn+0xa5/0x210
[ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.105732] ? report_bug+0x1f2/0x200
[ 33.105902] ? handle_bug+0x46/0x90
[ 33.106546] ? exc_invalid_op+0x19/0x50
[ 33.106762] ? asm_exc_invalid_op+0x1b/0x20
[ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.107249] ? nf_tables_chain_destroy+0x30/0x260
[ 33.107506] nf_tables_trans_destroy_work+0x669/0x680
[ 33.107782] ? mark_held_locks+0x28/0xa0
[ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10
[ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70
[ 33.108538] process_one_work+0x68c/0xb70
[ 33.108755] ? lock_acquire+0x17f/0x420
[ 33.108977] ? __pfx_process_one_work+0x10/0x10
[ 33.109218] ? do_raw_spin_lock+0x128/0x1d0
[ 33.109435] ? _raw_spin_lock_irq+0x71/0x80
[ 33.109634] worker_thread+0x2bd/0x700
[ 33.109817] ? __pfx_worker_thread+0x10/0x10
[ 33.110254] kthread+0x18b/0x1d0
[ 33.110410] ? __pfx_kthread+0x10/0x10
[ 33.110581] ret_from_fork+0x29/0x50
[ 33.110757] </TASK>
[ 33.110866] irq event stamp: 1651
[ 33.111017] hardirqs last enabled at (1659): [<ffffffffa206a209>] __up_console_sem+0x79/0xa0
[ 33.111379] hardirqs last disabled at (1666): [<ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0
[ 33.111740] softirqs last enabled at (1616): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112094] softirqs last disabled at (1367): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112453] ---[ end trace 0000000000000000 ]---
This is due to the nft_chain_lookup_byid ignoring the genmask. After this
change, adding the new rule will fail as it will not find the chain. |
