| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix potential overflow of shmem scatterlist length
When a scatterlists table of a GEM shmem object of size 4 GB or more is
populated with pages allocated from a folio, unsigned int .length
attribute of a scatterlist may get overflowed if total byte length of
pages allocated to that single scatterlist happens to reach or cross the
4GB limit. As a consequence, users of the object may suffer from hitting
unexpected, premature end of the object's backing pages.
[278.780187] ------------[ cut here ]------------
[278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915]
...
[278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary)
[278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
[278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
[278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915]
...
[278.780786] Call Trace:
[278.780787] <TASK>
[278.780788] ? __apply_to_page_range+0x3e6/0x910
[278.780795] ? __pfx_remap_sg+0x10/0x10 [i915]
[278.780906] apply_to_page_range+0x14/0x30
[278.780908] remap_io_sg+0x14d/0x260 [i915]
[278.781013] vm_fault_cpu+0xd2/0x330 [i915]
[278.781137] __do_fault+0x3a/0x1b0
[278.781140] do_fault+0x322/0x640
[278.781143] __handle_mm_fault+0x938/0xfd0
[278.781150] handle_mm_fault+0x12c/0x300
[278.781152] ? lock_mm_and_find_vma+0x4b/0x760
[278.781155] do_user_addr_fault+0x2d6/0x8e0
[278.781160] exc_page_fault+0x96/0x2c0
[278.781165] asm_exc_page_fault+0x27/0x30
...
That issue was apprehended by the author of a change that introduced it,
and potential risk even annotated with a comment, but then never addressed.
When adding folio pages to a scatterlist table, take care of byte length
of any single scatterlist not exceeding max_segment.
(cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60) |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: microchip: Fix error path in PTP IRQ setup
If request_threaded_irq() fails during the PTP message IRQ setup, the
newly created IRQ mapping is never disposed. Indeed, the
ksz_ptp_irq_setup()'s error path only frees the mappings that were
successfully set up.
Dispose the newly created mapping if the associated
request_threaded_irq() fails at setup. |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: fix percpu use-after-free in remove_nh_grp_entry
When removing a nexthop from a group, remove_nh_grp_entry() publishes
the new group via rcu_assign_pointer() then immediately frees the
removed entry's percpu stats with free_percpu(). However, the
synchronize_net() grace period in the caller remove_nexthop_from_groups()
runs after the free. RCU readers that entered before the publish still
see the old group and can dereference the freed stats via
nh_grp_entry_stats_inc() -> get_cpu_ptr(nhge->stats), causing a
use-after-free on percpu memory.
Fix by deferring the free_percpu() until after synchronize_net() in the
caller. Removed entries are chained via nh_list onto a local deferred
free list. After the grace period completes and all RCU readers have
finished, the percpu stats are safely freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free by using call_rcu() for oplock_info
ksmbd currently frees oplock_info immediately using kfree(), even
though it is accessed under RCU read-side critical sections in places
like opinfo_get() and proc_show_files().
Since there is no RCU grace period delay between nullifying the pointer
and freeing the memory, a reader can still access oplock_info
structure after it has been freed. This can leads to a use-after-free
especially in opinfo_get() where atomic_inc_not_zero() is called on
already freed memory.
Fix this by switching to deferred freeing using call_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close()
opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being
accessed after rcu_read_unlock() has been called. This creates a
race condition where the memory could be freed by a concurrent
writer between the unlock and the subsequent pointer dereferences
(opinfo->is_lease, etc.), leading to a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read
The q54sj108a2_debugfs_read function suffers from a stack buffer overflow
due to incorrect arguments passed to bin2hex(). The function currently
passes 'data' as the destination and 'data_char' as the source.
Because bin2hex() converts each input byte into two hex characters, a
32-byte block read results in 64 bytes of output. Since 'data' is only
34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end
of the buffer onto the stack.
Additionally, the arguments were swapped: it was reading from the
zero-initialized 'data_char' and writing to 'data', resulting in
all-zero output regardless of the actual I2C read.
Fix this by:
1. Expanding 'data_char' to 66 bytes to safely hold the hex output.
2. Correcting the bin2hex() argument order and using the actual read count.
3. Using a pointer to select the correct output buffer for the final
simple_read_from_buffer call. |
| Dolibarr is an enterprise resource planning (ERP) and customer relationship management (CRM) software package. Versions 22.0.2 and earlier contains an authenticated remote code execution vulnerability in the user extrafields functionality. User-controlled input from the "computed value" field is passed to PHP's `eval()` function without adequate sanitization, allowing authenticated administrators to execute arbitrary PHP code on the server. As of time of publication, no patched versions are available. |
| Password Pusher is an open source application to communicate sensitive information over the web. Prior to versions 1.69.3 and 2.4.2, a security issue in OSS PasswordPusher allowed unauthenticated creation of file-type pushes through a generic JSON API create path under certain configurations. This could bypass the intended authentication boundary for file push creation. This issue has been patched in versions 1.69.3 and 2.4.2. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-QUIC (DoQ) server can be driven into unbounded goroutine and memory growth by a remote client that opens many QUIC streams and sends only 1 byte per stream. When the worker pool is full, CoreDNS still spawns a goroutine per accepted stream to wait for a worker token. Additionally, active workers block indefinitely in io.ReadFull() with no per-stream read deadline, allowing an attacker to pin all workers by sending a single byte so the read blocks waiting for the second byte of the DoQ length prefix. This enables an unauthenticated remote attacker to cause memory exhaustion and OOM-kill. This issue has been fixed in version 1.14.3. No known workarounds exist. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-HTTPS (DoH) GET path accepts oversized dns= query parameter values and performs URL query parsing, base64 decoding, and DNS message unpacking before rejecting the request. Unlike the POST path, which applies a bounded read via http.MaxBytesReader limited to 65536 bytes, the GET path has no equivalent size validation before expensive processing. A remote, unauthenticated attacker can repeatedly send oversized DoH GET requests to force high CPU usage, large transient memory allocations, and elevated garbage-collection pressure, leading to denial of service. This issue has been fixed in version 1.14.3. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the tsig plugin can be bypassed on non-plain-DNS transports (DoT, DoH, DoH3, DoQ, and gRPC) because it trusts the transport writer's TsigStatus() instead of performing verification itself. The DoH and DoH3 writer's TsigStatus() always returns nil, the DoT server does not set TsigSecret on the dns.Server, and the DoQ and gRPC writers also unconditionally return nil. This allows an unauthenticated remote client to bypass TSIG-based authentication and access resources intended to be restricted behind a tsig require all policy. Plain DNS over TCP and UDP are not affected. This issue has been fixed in version 1.14.3. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-mdp: Fix error handling in probe function
Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent
resource leak.
Add check for the return value of vpu_get_plat_device() to prevent null
pointer dereference. And vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put() to
prevent reference leak. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: Avoid double-rtnl_lock ELP metric worker
batadv_v_elp_get_throughput() might be called when the RTNL lock is already
held. This could be problematic when the work queue item is cancelled via
cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case,
an rtnl_lock() would cause a deadlock.
To avoid this, rtnl_trylock() was used in this function to skip the
retrieval of the ethtool information in case the RTNL lock was already
held.
But for cfg80211 interfaces, batadv_get_real_netdev() was called - which
also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must
also be used instead and the lockless version __batadv_get_real_netdev()
has to be called. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the transfer plugin can select the wrong ACL stanza when both a parent zone and a more-specific subzone are configured. The longestMatch() function in plugin/transfer/transfer.go uses a lexicographic string comparison instead of an actual longest-suffix match to select the winning zone. As a result, a permissive parent-zone transfer rule can override a restrictive subzone rule depending on zone name ordering (e.g., "example.org." > "a.example.org." lexicographically). This allows an unauthorized remote client to perform AXFR/IXFR for the subzone and retrieve its full zone contents. This issue has been fixed in version 1.14.3. |
| Nornicdb is a distributed low-latency, Graph+Vector, Temporal MVCC with all sub-ms HNSW search, graph traversal, and writes. Prior to version 1.0.42-hotfix, the --address CLI flag (and NORNICDB_ADDRESS / server.host config key) is plumbed through to the HTTP server correctly but never reaches the Bolt server config. The Bolt listener therefore always binds to the wildcard address (all interfaces), regardless of what the user configures. On a LAN, this exposes the graph database — with its default admin:password credentials — to any device sharing the network. This issue has been patched in version 1.0.42-hotfix. |
| CoreDNS is a DNS server written in Go. In versions prior to 1.14.3, the gRPC, QUIC, DoH, and DoH3 transport implementations incorrectly handle TSIG authentication. For gRPC and QUIC, the server checks whether the TSIG key name exists in the configuration but never calls dns.TsigVerify() to validate the HMAC. If the key name matches a configured key, the tsigStatus field remains nil and the tsig plugin treats the request as successfully authenticated regardless of the MAC value. For DoH and DoH3, the issue is more severe: the DoHWriter.TsigStatus() method unconditionally returns nil, and the server never inspects the TSIG record at all. Any request containing a TSIG record is treated as authenticated over DoH and DoH3, even if the key name is invalid and the MAC is arbitrary.
An unauthenticated network attacker can exploit this to bypass TSIG-protected functionality such as AXFR/IXFR zone transfers, dynamic DNS updates, or other TSIG-gated plugin behavior. The DoH and DoH3 variants have a lower exploitation bar because the attacker does not need to know a valid TSIG key name.
This issue has been fixed in version 1.14.3. As a workaround, disable gRPC, QUIC, DoH, and DoH3 listeners where TSIG authentication is required, or restrict network-level access to affected transport ports to trusted sources only. |
| MapServer is a system for developing web-based GIS applications. From version 6.0 to before version 8.6.2, a reflected XSS vulnerability in MapServer's WMS server allows an unauthenticated attacker to inject arbitrary HTML/JavaScript into the browser of any user who opens a crafted WMS URL. The vulnerability is triggered via FORMAT=application/openlayers combined with an unsanitized SRS parameter in WMS 1.3.0 requests. This issue has been patched in version 8.6.2. |
| The OttoKit: All-in-One Automation Platform WordPress plugin before 1.1.23 does not properly sanitize user input before using it in a SQL statement, which could allow unauthenticated attackers to perform SQL injection attacks. |
| In OpenStack Cyborg before 16.0.1, the Accelerator Request (ARQ) API does not enforce project ownership at any layer. The project_id column in the database is never populated (NULL for every ARQ), database queries have no project filtering, and policy checks are self-referential (the authorize_wsgi decorator compares the caller's project_id with itself rather than the target resource). Any authenticated non-admin user can complete various actions such as deleting ARQs bound to other projects' instances, aka cross-tenant denial of service. |
| An exploitable SQL injection vulnerability exists in the authenticated part of ERPNext v10.1.6. Specially crafted web requests can cause SQL injections resulting in data compromise. The employee and sort_order parameter can be used to perform an SQL injection attack. An attacker can use a browser to trigger these vulnerabilities, and no special tools are required. |
