Total
297 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-38553 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid deadlocks"). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed. | ||||
| CVE-2024-38597 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: sungem: remove .ndo_poll_controller to avoid deadlocks Erhard reports netpoll warnings from sungem: netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398) WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c gem_poll_controller() disables interrupts, which may sleep. We can't sleep in netpoll, it has interrupts disabled completely. Strangely, gem_poll_controller() doesn't even poll the completions, and instead acts as if an interrupt has fired so it just schedules NAPI and exits. None of this has been necessary for years, since netpoll invokes NAPI directly. | ||||
| CVE-2024-38598 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: fix resync softlockup when bitmap size is less than array size Is is reported that for dm-raid10, lvextend + lvchange --syncaction will trigger following softlockup: kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976] CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1 RIP: 0010:_raw_spin_unlock_irq+0x13/0x30 Call Trace: <TASK> md_bitmap_start_sync+0x6b/0xf0 raid10_sync_request+0x25c/0x1b40 [raid10] md_do_sync+0x64b/0x1020 md_thread+0xa7/0x170 kthread+0xcf/0x100 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1a/0x30 And the detailed process is as follows: md_do_sync j = mddev->resync_min while (j < max_sectors) sectors = raid10_sync_request(mddev, j, &skipped) if (!md_bitmap_start_sync(..., &sync_blocks)) // md_bitmap_start_sync set sync_blocks to 0 return sync_blocks + sectors_skippe; // sectors = 0; j += sectors; // j never change Root cause is that commit 301867b1c168 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter") return early from md_bitmap_get_counter(), without setting returned blocks. Fix this problem by always set returned blocks from md_bitmap_get_counter"(), as it used to be. Noted that this patch just fix the softlockup problem in kernel, the case that bitmap size doesn't match array size still need to be fixed. | ||||
| CVE-2024-38600 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: Fix deadlocks with kctl removals at disconnection In snd_card_disconnect(), we set card->shutdown flag at the beginning, call callbacks and do sync for card->power_ref_sleep waiters at the end. The callback may delete a kctl element, and this can lead to a deadlock when the device was in the suspended state. Namely: * A process waits for the power up at snd_power_ref_and_wait() in snd_ctl_info() or read/write() inside card->controls_rwsem. * The system gets disconnected meanwhile, and the driver tries to delete a kctl via snd_ctl_remove*(); it tries to take card->controls_rwsem again, but this is already locked by the above. Since the sleeper isn't woken up, this deadlocks. An easy fix is to wake up sleepers before processing the driver disconnect callbacks but right after setting the card->shutdown flag. Then all sleepers will abort immediately, and the code flows again. So, basically this patch moves the wait_event() call at the right timing. While we're at it, just to be sure, call wait_event_all() instead of wait_event(), although we don't use exclusive events on this queue for now. | ||||
| CVE-2021-47582 | 2024-09-11 | 3.3 Low | ||
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Make do_proc_control() and do_proc_bulk() killable The USBDEVFS_CONTROL and USBDEVFS_BULK ioctls invoke usb_start_wait_urb(), which contains an uninterruptible wait with a user-specified timeout value. If timeout value is very large and the device being accessed does not respond in a reasonable amount of time, the kernel will complain about "Task X blocked for more than N seconds", as found in testing by syzbot: INFO: task syz-executor.0:8700 blocked for more than 143 seconds. Not tainted 5.14.0-rc7-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor.0 state:D stack:23192 pid: 8700 ppid: 8455 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4681 [inline] __schedule+0xc07/0x11f0 kernel/sched/core.c:5938 schedule+0x14b/0x210 kernel/sched/core.c:6017 schedule_timeout+0x98/0x2f0 kernel/time/timer.c:1857 do_wait_for_common+0x2da/0x480 kernel/sched/completion.c:85 __wait_for_common kernel/sched/completion.c:106 [inline] wait_for_common kernel/sched/completion.c:117 [inline] wait_for_completion_timeout+0x46/0x60 kernel/sched/completion.c:157 usb_start_wait_urb+0x167/0x550 drivers/usb/core/message.c:63 do_proc_bulk+0x978/0x1080 drivers/usb/core/devio.c:1236 proc_bulk drivers/usb/core/devio.c:1273 [inline] usbdev_do_ioctl drivers/usb/core/devio.c:2547 [inline] usbdev_ioctl+0x3441/0x6b10 drivers/usb/core/devio.c:2713 ... To fix this problem, this patch replaces usbfs's calls to usb_control_msg() and usb_bulk_msg() with special-purpose code that does essentially the same thing (as recommended in the comment for usb_start_wait_urb()), except that it always uses a killable wait and it uses GFP_KERNEL rather than GFP_NOIO. | ||||
| CVE-2021-47587 | 2024-09-11 | 5.6 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: net: systemport: Add global locking for descriptor lifecycle The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. | ||||
| CVE-2021-47590 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix deadlock in __mptcp_push_pending() __mptcp_push_pending() may call mptcp_flush_join_list() with subflow socket lock held. If such call hits mptcp_sockopt_sync_all() then subsequently __mptcp_sockopt_sync() could try to lock the subflow socket for itself, causing a deadlock. sysrq: Show Blocked State task:ss-server state:D stack: 0 pid: 938 ppid: 1 flags:0x00000000 Call Trace: <TASK> __schedule+0x2d6/0x10c0 ? __mod_memcg_state+0x4d/0x70 ? csum_partial+0xd/0x20 ? _raw_spin_lock_irqsave+0x26/0x50 schedule+0x4e/0xc0 __lock_sock+0x69/0x90 ? do_wait_intr_irq+0xa0/0xa0 __lock_sock_fast+0x35/0x50 mptcp_sockopt_sync_all+0x38/0xc0 __mptcp_push_pending+0x105/0x200 mptcp_sendmsg+0x466/0x490 sock_sendmsg+0x57/0x60 __sys_sendto+0xf0/0x160 ? do_wait_intr_irq+0xa0/0xa0 ? fpregs_restore_userregs+0x12/0xd0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9ba546c2d0 RSP: 002b:00007ffdc3b762d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9ba56c8060 RCX: 00007f9ba546c2d0 RDX: 000000000000077a RSI: 0000000000e5e180 RDI: 0000000000000234 RBP: 0000000000cc57f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ba56c8060 R13: 0000000000b6ba60 R14: 0000000000cc7840 R15: 41d8685b1d7901b8 </TASK> Fix the issue by using __mptcp_flush_join_list() instead of plain mptcp_flush_join_list() inside __mptcp_push_pending(), as suggested by Florian. The sockopt sync will be deferred to the workqueue. | ||||
| CVE-2024-36286 | 1 Redhat | 1 Enterprise Linux | 2024-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu() syzbot reported that nf_reinject() could be called without rcu_read_lock() : WARNING: suspicious RCU usage 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Not tainted net/netfilter/nfnetlink_queue.c:263 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syz-executor.4/13427: #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_do_batch kernel/rcu/tree.c:2190 [inline] #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_core+0xa86/0x1830 kernel/rcu/tree.c:2471 #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: nfqnl_flush net/netfilter/nfnetlink_queue.c:405 [inline] #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: instance_destroy_rcu+0x30/0x220 net/netfilter/nfnetlink_queue.c:172 stack backtrace: CPU: 0 PID: 13427 Comm: syz-executor.4 Not tainted 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nf_reinject net/netfilter/nfnetlink_queue.c:323 [inline] nfqnl_reinject+0x6ec/0x1120 net/netfilter/nfnetlink_queue.c:397 nfqnl_flush net/netfilter/nfnetlink_queue.c:410 [inline] instance_destroy_rcu+0x1ae/0x220 net/netfilter/nfnetlink_queue.c:172 rcu_do_batch kernel/rcu/tree.c:2196 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2471 handle_softirqs+0x2d6/0x990 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> | ||||
| CVE-2024-38780 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf/sw-sync: don't enable IRQ from sync_print_obj() Since commit a6aa8fca4d79 ("dma-buf/sw-sync: Reduce irqsave/irqrestore from known context") by error replaced spin_unlock_irqrestore() with spin_unlock_irq() for both sync_debugfs_show() and sync_print_obj() despite sync_print_obj() is called from sync_debugfs_show(), lockdep complains inconsistent lock state warning. Use plain spin_{lock,unlock}() for sync_print_obj(), for sync_debugfs_show() is already using spin_{lock,unlock}_irq(). | ||||
| CVE-2024-39468 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix deadlock in smb2_find_smb_tcon() Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such deadlock. | ||||
| CVE-2024-40912 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup() The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from softirq context. However using only spin_lock() to get sta->ps_lock in ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to take this same lock ending in deadlock. Below is an example of rcu stall that arises in such situation. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996 rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4) CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742 Hardware name: RPT (r1) (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : queued_spin_lock_slowpath+0x58/0x2d0 lr : invoke_tx_handlers_early+0x5b4/0x5c0 sp : ffff00001ef64660 x29: ffff00001ef64660 x28: ffff000009bc1070 x27: ffff000009bc0ad8 x26: ffff000009bc0900 x25: ffff00001ef647a8 x24: 0000000000000000 x23: ffff000009bc0900 x22: ffff000009bc0900 x21: ffff00000ac0e000 x20: ffff00000a279e00 x19: ffff00001ef646e8 x18: 0000000000000000 x17: ffff800016468000 x16: ffff00001ef608c0 x15: 0010533c93f64f80 x14: 0010395c9faa3946 x13: 0000000000000000 x12: 00000000fa83b2da x11: 000000012edeceea x10: ffff0000010fbe00 x9 : 0000000000895440 x8 : 000000000010533c x7 : ffff00000ad8b740 x6 : ffff00000c350880 x5 : 0000000000000007 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00000ac0e0e8 Call trace: queued_spin_lock_slowpath+0x58/0x2d0 ieee80211_tx+0x80/0x12c ieee80211_tx_pending+0x110/0x278 tasklet_action_common.constprop.0+0x10c/0x144 tasklet_action+0x20/0x28 _stext+0x11c/0x284 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 do_softirq+0x74/0x7c __local_bh_enable_ip+0xa0/0xa4 _ieee80211_wake_txqs+0x3b0/0x4b8 __ieee80211_wake_queue+0x12c/0x168 ieee80211_add_pending_skbs+0xec/0x138 ieee80211_sta_ps_deliver_wakeup+0x2a4/0x480 ieee80211_mps_sta_status_update.part.0+0xd8/0x11c ieee80211_mps_sta_status_update+0x18/0x24 sta_apply_parameters+0x3bc/0x4c0 ieee80211_change_station+0x1b8/0x2dc nl80211_set_station+0x444/0x49c genl_family_rcv_msg_doit.isra.0+0xa4/0xfc genl_rcv_msg+0x1b0/0x244 netlink_rcv_skb+0x38/0x10c genl_rcv+0x34/0x48 netlink_unicast+0x254/0x2bc netlink_sendmsg+0x190/0x3b4 ____sys_sendmsg+0x1e8/0x218 ___sys_sendmsg+0x68/0x8c __sys_sendmsg+0x44/0x84 __arm64_sys_sendmsg+0x20/0x28 do_el0_svc+0x6c/0xe8 el0_svc+0x14/0x48 el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x14c/0x150 Using spin_lock_bh()/spin_unlock_bh() instead prevents softirq to raise on the same CPU that is holding the lock. | ||||
| CVE-2024-42153 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr When del_timer_sync() is called in an interrupt context it throws a warning because of potential deadlock. The timer is used only to exit from wait_for_completion() after a timeout so replacing the call with wait_for_completion_timeout() allows to remove the problematic timer and its related functions altogether. | ||||
| CVE-2024-42239 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fail bpf_timer_cancel when callback is being cancelled Given a schedule: timer1 cb timer2 cb bpf_timer_cancel(timer2); bpf_timer_cancel(timer1); Both bpf_timer_cancel calls would wait for the other callback to finish executing, introducing a lockup. Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps track of all in-flight cancellation requests for a given BPF timer. Whenever cancelling a BPF timer, we must check if we have outstanding cancellation requests, and if so, we must fail the operation with an error (-EDEADLK) since cancellation is synchronous and waits for the callback to finish executing. This implies that we can enter a deadlock situation involving two or more timer callbacks executing in parallel and attempting to cancel one another. Note that we avoid incrementing the cancelling counter for the target timer (the one being cancelled) if bpf_timer_cancel is not invoked from a callback, to avoid spurious errors. The whole point of detecting cur->cancelling and returning -EDEADLK is to not enter a busy wait loop (which may or may not lead to a lockup). This does not apply in case the caller is in a non-callback context, the other side can continue to cancel as it sees fit without running into errors. Background on prior attempts: Earlier versions of this patch used a bool 'cancelling' bit and used the following pattern under timer->lock to publish cancellation status. lock(t->lock); t->cancelling = true; mb(); if (cur->cancelling) return -EDEADLK; unlock(t->lock); hrtimer_cancel(t->timer); t->cancelling = false; The store outside the critical section could overwrite a parallel requests t->cancelling assignment to true, to ensure the parallely executing callback observes its cancellation status. It would be necessary to clear this cancelling bit once hrtimer_cancel is done, but lack of serialization introduced races. Another option was explored where bpf_timer_start would clear the bit when (re)starting the timer under timer->lock. This would ensure serialized access to the cancelling bit, but may allow it to be cleared before in-flight hrtimer_cancel has finished executing, such that lockups can occur again. Thus, we choose an atomic counter to keep track of all outstanding cancellation requests and use it to prevent lockups in case callbacks attempt to cancel each other while executing in parallel. | ||||
| CVE-2024-42245 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "sched/fair: Make sure to try to detach at least one movable task" This reverts commit b0defa7ae03ecf91b8bfd10ede430cff12fcbd06. b0defa7ae03ec changed the load balancing logic to ignore env.max_loop if all tasks examined to that point were pinned. The goal of the patch was to make it more likely to be able to detach a task buried in a long list of pinned tasks. However, this has the unfortunate side effect of creating an O(n) iteration in detach_tasks(), as we now must fully iterate every task on a cpu if all or most are pinned. Since this load balance code is done with rq lock held, and often in softirq context, it is very easy to trigger hard lockups. We observed such hard lockups with a user who affined O(10k) threads to a single cpu. When I discussed this with Vincent he initially suggested that we keep the limit on the number of tasks to detach, but increase the number of tasks we can search. However, after some back and forth on the mailing list, he recommended we instead revert the original patch, as it seems likely no one was actually getting hit by the original issue. | ||||
| CVE-2024-42250 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: add missing lock protection when polling Add missing lock protection in poll routine when iterating xarray, otherwise: Even with RCU read lock held, only the slot of the radix tree is ensured to be pinned there, while the data structure (e.g. struct cachefiles_req) stored in the slot has no such guarantee. The poll routine will iterate the radix tree and dereference cachefiles_req accordingly. Thus RCU read lock is not adequate in this case and spinlock is needed here. | ||||
| CVE-2024-42253 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock race Ensure that `i2c_lock' is held when setting interrupt latch and mask in pca953x_irq_bus_sync_unlock() in order to avoid races. The other (non-probe) call site pca953x_gpio_set_multiple() ensures the lock is held before calling pca953x_write_regs(). The problem occurred when a request raced against irq_bus_sync_unlock() approximately once per thousand reboots on an i.MX8MP based system. * Normal case 0-0022: write register AI|3a {03,02,00,00,01} Input latch P0 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 * Race case 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register *** 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 | ||||
| CVE-2024-40965 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: lpi2c: Avoid calling clk_get_rate during transfer Instead of repeatedly calling clk_get_rate for each transfer, lock the clock rate and cache the value. A deadlock has been observed while adding tlv320aic32x4 audio codec to the system. When this clock provider adds its clock, the clk mutex is locked already, it needs to access i2c, which in return needs the mutex for clk_get_rate as well. | ||||
| CVE-2024-40967 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: imx: Introduce timeout when waiting on transmitter empty By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential deadlock. In case of the timeout, there is not much we can do, so we simply ignore the transmitter state and optimistically try to continue. | ||||
| CVE-2024-40969 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: don't set RO when shutting down f2fs Shutdown does not check the error of thaw_super due to readonly, which causes a deadlock like below. f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread - bdev_freeze - freeze_super - f2fs_stop_checkpoint() - f2fs_handle_critical_error - sb_start_write - set RO - waiting - bdev_thaw - thaw_super_locked - return -EINVAL, if sb_rdonly() - f2fs_stop_discard_thread -> wait for kthread_stop(discard_thread); | ||||
| CVE-2024-40977 | 1 Linux | 1 Linux Kernel | 2024-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921s: fix potential hung tasks during chip recovery During chip recovery (e.g. chip reset), there is a possible situation that kernel worker reset_work is holding the lock and waiting for kernel thread stat_worker to be parked, while stat_worker is waiting for the release of the same lock. It causes a deadlock resulting in the dumping of hung tasks messages and possible rebooting of the device. This patch prevents the execution of stat_worker during the chip recovery. | ||||