Search vulnerabilities

Results 164

CVE-2026-1519

Excessive NSEC3 iterations cause high CPU load during insecure delegation validation

If a BIND resolver is performing DNSSEC validation and encounters a maliciously crafted zone, the resolver may consume excessive CPU. Authoritative-only servers are generally unaffected, although there are circumstances where authoritative servers may make recursive queries (see: https://kb.isc.org/docs/why-does-my-authoritative-server-make-recursive-queries). This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.46, 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.46-S1, and 9.20.9-S1 through 9.20.20-S1.

CVSS 3.1 · 7.5 High EPSS 1.8% KEV · Not listed
Vendors
Isc
Products
CVE-2026-90878

vllm-project vLLM Jinja Template Rendering completions resource consumption

A vulnerability was determined in vllm-project vLLM up to 0.27.1. This affects an unknown part of the file /v1/chat/completions of the component Jinja Template Rendering. This manipulation of the argument chat_template causes resource consumption. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The pull request to fix this issue awaits acceptance.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-33814

Infinite loop in HTTP/2 transport when given bad SETTINGS_MAX_FRAME_SIZE in net/http/internal/http2 in golang.org/x/net

When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Products
CVE-2026-31420

bridge: mrp: reject zero test interval to avoid OOM panic

In the Linux kernel, the following vulnerability has been resolved: bridge: mrp: reject zero test interval to avoid OOM panic br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied interval value from netlink without validation. When interval is 0, usecs_to_jiffies(0) yields 0, causing the delayed work (br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule itself with zero delay. This creates a tight loop on system_percpu_wq that allocates and transmits MRP test frames at maximum rate, exhausting all system memory and causing a kernel panic via OOM deadlock. The same zero-interval issue applies to br_mrp_start_in_test_parse() for interconnect test frames. Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both IFLA_BRIDGE_MRP_START_TEST_INTERVAL and IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the netlink attribute parsing layer before the value ever reaches the workqueue scheduling code. This is consistent with how other bridge subsystems (br_fdb, br_mst) enforce range constraints on netlink attributes.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-89695

nfsd: cap decoded POSIX ACL count to bound sort cost

In the Linux kernel, the following vulnerability has been resolved: nfsd: cap decoded POSIX ACL count to bound sort cost nfsd4_decode_posixacl() reads a u32 entry count off the wire and passes it straight to posix_acl_alloc() and sort_pacl_range(). The latter is an O(n^2) bubble sort, so a client-chosen count drives unbounded CPU in the server's compound processing path. nfsd4_decode_posixacl() xdr_stream_decode_u32(&count) /* uncapped u32 */ posix_acl_alloc(count, GFP_KERNEL) sort_pacl_range(*acl, 0, count - 1) /* O(n^2) bubble sort */ The encoder side in the same file already rejects ACLs whose a_count exceeds NFS_ACL_MAX_ENTRIES, but the decoder introduced in commit 5fc51dfc2eb1 ("NFSD: Add support for XDR decoding POSIX draft ACLs") omitted the symmetric check. Fix by rejecting a wire count greater than NFS_ACL_MAX_ENTRIES with nfserr_inval, before any allocation, so the sort is bounded by NFS_ACL_MAX_ENTRIES^2 comparisons. While we're in here, also fix the nfserr_resource return if posix_acl_alloc() fails. That's not a legal error code for v4.1+. Change it to return nfserr_jukebox as that's more appropriate for memory allocation failures.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-85730

smol-toml: Denial of Service via malformed TOML documents

smol-toml is a small, fast, and correct TOML parser and serializer. Prior to 1.7.1, parse() can enter an infinite loop when a value inside an array or inline table is followed by a comment with no trailing newline. In src/util.ts, skipUntil() calls indexOfNewline(), receives -1 at the end of input, and resets the cursor to the beginning of the string instead of leaving the structure scan. The parser then hangs indefinitely and can consume a service's processing capacity when an application parses attacker-controlled TOML. This issue is fixed in version 1.7.1.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-77465

toml-node: Uncontrolled Recursion

toml-node is a TOML parser for Node.js and the browser. Prior to 4.2.0, toml.parse() uses a Peggy 5.1.0 generated recursive-descent parser in lib/parser.js whose peg$parsevalue, peg$parsearray, and peg$parseinline_table_entry functions recurse through nested arrays and inline tables without a depth limit. A remote unauthenticated application parsing an attacker-controlled TOML document containing a few thousand nested arrays or inline tables can exhaust the Node.js call stack, raise an unexpected RangeError rather than the parser's SyntaxError, and terminate an unprotected request worker or process. The corresponding grammar source is src/toml.pegjs, where the generated parser must be bounded. This issue is fixed in version 4.2.0.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-81347

Frontend Admin by DynamiApps < 3.29.13 - Unauthenticated .htaccess and index.php Deletion via Custom Directory Path Traversal

The Frontend Admin by DynamiApps WordPress plugin before 3.29.13 does not properly validate a user-controllable directory path before deleting files within it, allowing unauthenticated attackers to delete index.php and .htaccess files outside the intended directory, including the WordPress root, which can render the site inoperable. Successful exploitation requires a non-default form configuration.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
CVE-2026-83613

xmldom: Quadratic-time attribute deduplication

xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. Prior to @xmldom/xmldom versions 0.8.15 and 0.9.12, and in xmldom version 0.6.0 and earlier, DOMHandler.startElement in lib/dom-parser.js inserts every parsed attribute through setAttributeNode, while NamedNodeMap.setNamedItem in lib/dom.js calls the linear getNamedItem or getNamedItemNS lookup for each insertion. A well-formed element with many distinct attributes therefore requires quadratic comparisons during DOMParser.parseFromString() and can stall a Node.js event loop before application validation. This issue is fixed in @xmldom/xmldom versions 0.8.15 and 0.9.12; no fixed version is available for xmldom.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-19484

@fastify/busboy vulnerable to Denial of Service via oversized multipart boundary

@fastify/busboy is a multipart form-data parser. In versions 3.1.0 through 3.2.0, a remote unauthenticated attacker can stall the Node.js event loop by sending a multipart request whose boundary is crafted to a specific length. The vendored streaming search stores its skip table in a fixed 256 entry byte array, and a boundary of exactly 252 bytes makes the search needle 256 bytes, which truncates the default skip distance to zero and turns the search into a CPU bound loop on a small body. A single small request can keep one core busy and deny service to other requests handled by the same process. The issue is fixed in @fastify/busboy 3.2.1, which widens the skip table so the skip distance is preserved. Users should upgrade to 3.2.1.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-84378

HTTPX2: Quadratic SSE line buffering can cause CPU denial of service

HTTPX2 is a next generation HTTP client for Python. From 2.5.0 until 2.10.0, the HTTPX2 Server-Sent Events parser in src/httpx2/httpx2/_sse.py repeatedly copies and rescans buffered text in _SSELineDecoder.decode() when an attacker-controlled or compromised SSE endpoint splits one unterminated line across many response chunks. The behavior affects httpx2.Client.sse() and httpx2.AsyncClient.sse(), and the total processing work grows quadratically with the line length, allowing a crafted stream to consume excessive CPU and block a synchronous worker or asynchronous event loop. This issue is fixed in version 2.10.0.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72647

Uncontrolled Recursion in Elasticsearch Leading to Denial of Service

Uncontrolled Recursion (CWE-674) in Elasticsearch can lead to denial of service via Serialized Data with Nested Payloads (CAPEC-230). An authenticated user holding only read privileges on a single index can submit one specially crafted search request whose deeply nested structure is processed without a depth limit, exhausting the thread stack and terminating the affected node.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-33607

dovecot: Dovecot: Denial of Service via IMAP LIST command

An attacker that has valid credentials can use IMAP LIST command to consume CPU. This can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage and kill the offending process and lock account. Alternatively install fixed version. No publicly available exploits are known.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-40014

dovecot: Dovecot: Denial of Service via crafted IMAP THREAD command

An attacker that can send mail to a user can craft a message header that makes the IMAP THREAD command consume CPU disproportionate to the size of the message. When a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-81724

NLTK before 3.10.3 Denial of Service via Uncontrolled Recursion

NLTK before 3.10.3 contains an uncontrolled recursion vulnerability in nltk.featstruct.FeatStructReader that allows unauthenticated attackers to cause a denial of service by supplying deeply nested feature-structure input. Attackers can craft trivial payloads with nested brackets that exceed Python's recursion limit and raise an unhandled RecursionError, crashing applications that parse user-supplied feature structures or feature grammars.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-81722

nltk PorterStemmer before 3.10.3 Quadratic-time DoS

nltk PorterStemmer in versions <= 3.10.2 (fixed in 3.10.3) contains an inefficient-algorithmic-complexity denial of service in PorterStemmer.stem(). The _is_consonant() helper walks backward over the entire run of trailing 'y' characters on every call, and _measure() invokes it for each stem position, causing O(n^2) behavior. A single ~20-50 KB untrusted token consisting of a long run of the letter 'y' followed by a matching suffix (e.g., 'ness') can pin a CPU core for seconds to minutes, causing availability impact.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-13761

Pega Platform versions 7.1.0 through 25.1.2 are affected by an improper validation of inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.

Pega Platform versions 7.1.0 through 25.1.2 are affected by an improper validation of inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.

CVSS 4.0 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-80594

Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc() by iterating through the extra descriptor data. However, it does not verify that the bLength of each descriptor is at least 2. A malicious device could provide a descriptor with bLength = 0, leading to an infinite loop in the driver. Add a check to ensure bLength is at least 2 before proceeding with parsing.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-44289

protobufjs: Denial of service through unbounded protobuf recursion

protobufjs compiles protobuf definitions into JavaScript (JS) functions. Prior to 7.5.6 and 8.0.2, protobufjs could recurse without a depth limit while decoding nested protobuf data. This affected both skipping unknown group fields and generated decoding of nested message fields. A crafted protobuf binary payload could cause the JavaScript call stack to be exhausted during decoding. This vulnerability is fixed in 7.5.6 and 8.0.2.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Products
CVE-2026-66393

NLTK before 3.9.4 Denial of Service via JSONTaggedDecoder

NLTK versions before 3.9.4 contain an unbounded recursion vulnerability in JSONTaggedDecoder.decode_obj() that allows attackers to cause denial of service by supplying deeply nested JSON structures. Attackers can craft JSON payloads exceeding the recursion limit to trigger an unhandled RecursionError that crashes the Python process.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products