Search vulnerabilities

Results 3,911

CVE-2026-99471

KVM: PPC: Book3S HV: Add SRCU protection for virtual-mode HPT hcalls

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add SRCU protection for virtual-mode HPT hcalls The virtual-mode HPT hcall handlers (H_ENTER, H_REMOVE, H_BULK_REMOVE, H_CLEAR_REF, H_CLEAR_MOD) call into book3s_hv_rm_mmu.c, which accesses memslots via kvm_memslots_raw(). kvm_memslots_raw() uses rcu_dereference_raw_check() to bypass SRCU lockdep annotation checking. This is safe in real mode because the entire guest entry/exit is wrapped in srcu_read_lock/unlock inside kvmppc_run_core() and kvmhv_run_single_vcpu(). However, since commit 6165d5dd99db ("KVM: PPC: Book3S HV: add virtual mode handlers for HPT hcalls and page faults"), these same handlers are also executed in virtual mode via kvmppc_pseries_do_hcall(), which runs after SRCU has already been released on guest exit. A concurrent KVM_SET_USER_MEMORY_REGION deletion or move can therefore call synchronize_srcu_expedited() — which does not wait for this thread — and then kfree(slot) and vfree(slot->arch.rmap) while the hcall handler still holds a raw pointer to the memslot. lock_rmap() then writes to freed vmalloc memory, leading to use-after-free and memory corruption. Because kvm_memslots_raw() suppresses lockdep checks, this race is entirely silent. Fix this by factoring out the 7 HPT hcall handlers (H_REMOVE, H_ENTER, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, H_BULK_REMOVE) into a helper function, kvmppc_pseries_do_hpt_hcall(), and wrapping its call site in srcu_read_lock(&kvm->srcu) / srcu_read_unlock(&kvm->srcu, idx). Targeting only the HPT hcalls avoids wrapping non-HPT hcalls that sleep (such as H_CONFER, H_REGISTER_VPA, H_PAGE_INIT) or handlers that already acquire SRCU internally (such as H_RTAS).

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99472

KVM: pfncache: use a dedicated invalidation sequence for cache refresh

In the Linux kernel, the following vulnerability has been resolved: KVM: pfncache: use a dedicated invalidation sequence for cache refresh The gfn_to_pfn_cache refresh path guards against mmu notifier invalidations which complete while it has dropped gpc->lock for the HVA->PFN lookup: hva_to_pfn_retry() samples kvm->mmu_invalidate_seq and retries if it changed, or if mn_active_invalidate_count is still elevated. That is insufficient for HVA-based caches. mmu_invalidate_seq is only advanced by kvm_mmu_invalidate_end() when the invalidated range overlaps a memslot, and an HVA-based cache (e.g. the Xen shared_info page mapped with KVM_XEN_ATTR_TYPE_SHARED_INFO_HVA) need not be backed by any memslot at all. An invalidation of the cached HVA which starts and ends entirely within the lookup window is thus invisible to the retry check: mn_active_invalidate_count is back to zero and the sequence never moved. The refresh then publishes a mapping of a page which has already been freed, and the next reader dereferences it: BUG: KASAN: use-after-free in kvm_xen_shared_info_init+0x3c6/0x440 Read of size 4 at addr ffff8880599c2900 by task syz.2.383/7257 Since gfn_to_pfn_cache_invalidate_start() deliberately skips caches which are not currently valid (including one whose refresh is in progress, as the refresh clears the valid flag before dropping the lock), the retry check is the only line of defence, and it must fire for *any* invalidation, not just those hitting a memslot. Add a dedicated kvm->gpc_invalidate_seq, incremented by every kvm_mmu_notifier_invalidate_range_end() under mn_invalidate_lock before mn_active_invalidate_count is decremented, and check it in hva_to_pfn_retry() instead of mmu_invalidate_seq. Incrementing in range_end() in the same critical section as the in-progress count also closes the variant where the cache is activated with the contested HVA only after invalidate_range_start() has run. The same bug is also reachable through the per-vCPU vcpu_info cache (KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO_HVA), where the stale mapping is then dereferenced by kvm_setup_guest_pvclock() on the next KVM_RUN: BUG: KASAN: use-after-free in kvm_setup_guest_pvclock+0x5bf/0x660 This intentionally makes refresh retry on *unrelated* mmu notifier events; restoring precision (and reworking the GPC locking more generally) is left for a subsequent series. Reproducers: https://david.woodhou.se/xen_shinfo_race.c https://david.woodhou.se/vcpu_info_race.c

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99473

KVM: guest_memfd: Gracefully handle xarray errors when binding a memslot

In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Gracefully handle xarray errors when binding a memslot If inserting a memslot into a guest_memfd's bindings xarray fails, propagate the error back to the caller, i.e. fail memslot creation as well. Signalling success and continuing on with memslot creation results in use-after-free, as the guest_memfd instance will remain reachable via the memslot after the file is freed (kvm_gmem_release() won't nullify the file pointer due to lack of a valid binding). Opportunistically WARN and reject binding if KVM_MEMSLOT_GMEM_ONLY is already set, partly to guard against goofs elsewhere, but mostly so that KVM doesn't need to worry about clobbering flags when unwinding on failure. Regarding the unwind, the slot must be fully prepared before inserting it into the bindings, at which point the slot becomes reachable. I.e. waiting to update the slot in order to avoid the ugly unwind isn't an option. And as part of the unwind, explicitly nullify the relevant bindings, as xarray can store a subset of entries when populating a range.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-129474

Use-after-free in magic method backtraces can lead to remote code execution

Use-after-free in magic method backtraces can lead to remote code execution. When collecting the arguments of a method call handled by __call() or __callStatic() for a backtrace, PHP can read stale values that may refer to freed memory. If a fatal error such as exceeding memory_limit occurs while an application enters such a call, with fatal_error_backtraces enabled (the default) and zend.exception_ignore_args disabled, a remote attacker who controls enough request data to influence memory allocation may cause memory corruption, crash the PHP worker or, with knowledge of memory addresses, execute arbitrary code. php.ini-production enables zend.exception_ignore_args, which prevents this. This issue affects PHP versions 8.5.* before 8.5.13.

CVSS 4.0 · 9.2 Critical EPSS 7.2% KEV · Not listed
Vendors
Products
CVE-2026-99474

HID: hiddev: keep state alive through disconnect unlock

In the Linux kernel, the following vulnerability has been resolved: HID: hiddev: keep state alive through disconnect unlock mutex_unlock() clears the mutex owner before taking its wait lock. A thread spinning in the final hiddev file release can acquire existancelock after hiddev_disconnect() clears the owner, then free hiddev before the disconnecting thread reaches the mutex wait lock. This causes a use-after-free in the mutex slow unlock path. Give the connection and each open file an explicit reference. Drop each reference only after its existancelock critical section has completed, so neither unlock path can free the mutex while the other is still using it.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99475

genirq: Defer kfree(irqaction) until irq_thread_dtor() finishes

In the Linux kernel, the following vulnerability has been resolved: genirq: Defer kfree(irqaction) until irq_thread_dtor() finishes When an interrupt thread exits abnormally via do_exit() (e.g. the interrupt handler oopses) without returning from irq_thread(), a concurrent call to free_irq() could free the irqaction before the irq_thread_dtor() exit task work runs. irq thread (oopsed) free_irq() ------------------- ---------- do_exit() exit_mm() complete_vfork_done() -------> kthread_stop() returns exit_files() ... kfree(action) exit_task_work() irq_thread_dtor() action->... <- use-after-free Track the pending exit work with the IRQTF_EXIT_WORK thread flag, and have __free_irq() wait for the bit to clear before kfree(). irq_thread_dtor() only runs on irq_thread abnormal exit. If that dtor also faults, free_irq() will hang indefinitely, but double IRQ thread faults require a reboot anyways. [ tglx: Add missing include ]

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99476

fsverity: Set S_VERITY only after rollback is no longer possible

In the Linux kernel, the following vulnerability has been resolved: fsverity: Set S_VERITY only after rollback is no longer possible Commit f77f281b6118 ("fsverity: use a hashtable to find the fsverity_info") changed the implementation of FS_IOC_ENABLE_VERITY to make concurrent reads start going through fsverity verification slightly earlier than they did before. Instead of it happening when enable_verity() calls fsverity_set_info(), it now happens when ->end_enable_verity() sets S_VERITY. However, ext4 and btrfs can roll back verity after they set S_VERITY, causing a use-after-free. Fix that by making ext4 and btrfs set S_VERITY only after rollback is no longer possible. On failure, don't roll back S_VERITY, but do roll back the filesystem-specific verity flag. Also update enable_verity() to handle any future instances of this bug more safely by warning and *not* freeing the fsverity_info. Finally, tweak some comments. Clarify one, and move information from another to its proper place in the comment for ->end_enable_verity().

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99477

fs/proc/task_mmu: pin mm_users in do_pagemap_scan()

In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: pin mm_users in do_pagemap_scan() The PAGEMAP_SCAN ioctl takes mmap_read_lock() on an mm obtained from /proc/<pid>/pagemap without holding a reference to mm_users. proc_mem_open() deliberately grabs only mm_count, so a consumer that touches the address space has to call mmget_not_zero() first. Every other consumer in this file does -- m_start(), do_procmap_query(), show_smaps_rollup() and pagemap_read() -- but do_pagemap_scan() does not. Without that reference the target can reach exit_mmap() concurrently, and exit_mmap() calls unmap_vmas() while holding mmap_lock only for reading, which does not exclude the scanner. For ordinary VMAs this is harmless, as free_pgtables() and remove_vma() run afterwards under mmap_write_lock. A shared hugetlb VMA is different: __hugetlb_zap_end() frees the VMA's hugetlb_vma_lock inside the read-locked phase. walk_hugetlb_range() can therefore load vma->vm_private_data, have the lock freed underneath it, and then down_read() a freed rw_semaphore. The load happens before the freeing side clears the pointer, so this is a use-after-free and not a NULL dereference. Any unprivileged user can reach it with no huge pages configured, as hugetlb_reserve_pages() allocates the lock before the VM_NORESERVE early return. Pin mm_users across the scan, the way the other consumers do. mmput() from the exiting task can then no longer reach exit_mmap() while a walk is in progress. [akpm@linux-foundation.org: remove unneeded & undesirable test for !mm]

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99478

filelock: keep superblock active through delegation wait

In the Linux kernel, the following vulnerability has been resolved: filelock: keep superblock active through delegation wait A caller may drop its path after try_break_deleg() returns a delegated inode but before break_deleg_wait() finishes. The extra inode reference held in struct delegated_inode does not keep the superblock active. After a lazy unmount, closing the delegation holder can release the last mount reference and shut down the superblock while another task waits for the delegation break. The waiter's final iput() can then enter the filesystem's eviction code after its superblock-private state was freed. This has been observed as a KASAN use-after-free in shmem_evict_inode(). When try_break_deleg() saves a delegated inode, take an active reference to its superblock while the caller still pins the mount. Keep that reference through break_deleg_wait() and the final iput(), then release it with deactivate_super(). This protects every caller of the helpers, including the mknod, mkdir, symlink and rmdir paths that drop their path before waiting.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99479

fbdev: atmel_lcdfb: Prevent FIFO work after removal

In the Linux kernel, the following vulnerability has been resolved: fbdev: atmel_lcdfb: Prevent FIFO work after removal The LCD controller IRQ schedules sinfo->task to recover from a FIFO underflow. Probe currently requests the IRQ before initializing the work, so an early interrupt can schedule an uninitialized work item. The probe error path and remove path cancel the work before freeing the IRQ. A FIFO-underflow interrupt can schedule the work again after that cancellation. framebuffer_release() may then free sinfo while the work is still pending. KASAN reported a use-after-free in atmel_lcdfb_task() when an underflow interrupt occurred during removal. With the IRQ freed before the work was cancelled, the same test completed without a kernel diagnostic. Initialize the work before requesting the IRQ. In both cleanup paths, free the IRQ before cancelling the work so that it cannot be scheduled again after cancellation.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99481

Bluetooth: hci_vhci: Pin module for debugfs file operations

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_vhci: Pin module for debugfs file operations An open debugfs file retains its file_operations pointer in the debugfs proxy state. However, force_suspend_fops, force_wakeup_fops, aosp_capable_fops, and force_devcoredump_fops have no .owner set to THIS_MODULE. As a result, full_proxy_open_regular() calls fops_get() which succeeds without taking a reference to the hci_vhci module. When userspace opens any of these debugfs files and later closes the /dev/vhci file descriptor (triggering vhci_release() and debugfs file removal), the open debugfs file descriptor remains valid in userspace. Because the module refcount was not incremented, the hci_vhci module can be unloaded via delete_module (rmmod hci_vhci). When the userspace process subsequently closes the debugfs file descriptor, full_proxy_release() accesses the already unmapped file_operations structure, resulting in a kernel page fault / oops: BUG: unable to handle page fault for address: fffffbfff846f18b #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:full_proxy_release+0x8e/0x140 Call Trace: <TASK> __fput+0x39f/0xa60 fput_close_sync+0xff/0x200 __x64_sys_close+0x8c/0xf0 do_syscall_64+0xc3/0x590 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Modules linked in: ... [last unloaded: hci_vhci(E)] The issue was discovered via manual code audit of drivers/bluetooth/hci_vhci.c and verified on a Linux 7.3-rc6 test VM with CONFIG_BT_VHCI=m by keeping a debugfs file open across controller teardown and module unload. Set .owner = THIS_MODULE on all four file_operations structures so that debugfs pins the module until all file descriptors are closed.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99482

ASoC: amd: ps: fix snd_acp63_remove() teardown ordering

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: ps: fix snd_acp63_remove() teardown ordering The ACP IRQ handlers dereference the SoundWire, SoundWire DMA, and PDM child platform devices, but snd_acp63_remove() unregisters them while the interrupt is still held by devres, which frees it only after remove returns. An interrupt in this window is a use-after-free. Mask the ACP interrupt sources and call devm_free_irq() before the first child device is unregistered. The masking goes through the new acp_hw_ops->disable_interrupts callback, keeping the remove path platform-agnostic. The interrupt line is shared, and acp_hw_deinit() clears the sources only after the children are gone, which would leave the line raised with no handler left to ack it. The window predates the tagged refactor, which only reshaped the dereferences. devm_free_irq() waits for in-flight handlers, but not for work the hardirq has already queued: acp63_irq_handler() schedules amd_sdw_irq_thread on the SoundWire manager. Draining that work in the manager's remove path is a soundwire-side change and follows separately. This issue was found by an in-house static analysis tool.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99484

ALSA: emux: Fix UAF of soundfont zones at note-on

In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: Fix UAF of soundfont zones at note-on snd_emux_note_on() looks up the matching zones via snd_soundfont_search_zone(), which takes sflist->lock only during the lookup and returns the raw zone pointers after releasing it. The caller then stores them in vp->zone without any protection. Meanwhile, a concurrent SNDRV_EMUX_IOCTL_REMOVE_LAST_SAMPLES ioctl may unlink and free those zones in snd_soundfont_remove_unlocked(); this leads to a use-after-free in snd_emux_note_on(), and later at accessing the cached vp->zone, e.g. in snd_emux_send_effect(). Fix it by holding sflist->lock in snd_emux_note_on() over the whole zone lookup and voice setup, and let snd_soundfont_search_zone() require the caller to hold the lock, instead. snd_soundfont_lock_preset() takes sflist->lock for setting presets_locked, so the removal path now syncs with the note-on finish.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99485

accel/amdxdna: clear the mailbox channel pointer when starting it fails

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: clear the mailbox channel pointer when starting it fails aie2_create_context() allocates a mailbox channel, starts it, and on a failed start frees it again: hwctx->priv->mbox_chann = xdna_mailbox_alloc_channel(ndev->mbox); ... ret = xdna_mailbox_start_channel(hwctx->priv->mbox_chann, ...); if (ret) goto free_channel; ... free_channel: xdna_mailbox_free_channel(hwctx->priv->mbox_chann); hwctx->priv->mbox_chann keeps pointing at the freed channel. That pointer is the driver's own test for whether a hardware context has a usable channel: aie2_destroy_context() returns early on NULL, aie2_sched_job_run() refuses to run a job on NULL, and the message helpers return -ENODEV on NULL. A stale pointer passes all of them. It matters on the restart path. aie2_hwctx_restart() calls aie2_create_context() again on a hardware context that is already live, after aie2_hwctx_stop() has torn its channel down, and the context survives a failure there: aie2_sched_job_timedout() discards the return value entirely, and aie2_hwctx_resume() only propagates it. What is left is a live hardware context holding a freed channel, and every later user of it takes the non-NULL branch: - the next job submitted reaches xdna_mailbox_send_msg() on the freed channel, via the !mbox_chann guard in aie2_sched_job_run(), - a second command timeout reaches aie2_hwctx_stop() -> aie2_destroy_context(), - closing the device reaches aie2_hwctx_fini() -> aie2_release_resource() -> xrs_release_resource() -> aie2_xrs_unload() -> aie2_destroy_context(), and aie2_destroy_context() then calls xdna_mailbox_stop_channel() followed by xdna_mailbox_free_channel() on memory that was already freed: a use-after-free, and a second free of the same channel. The AIE4 management channel already does this correctly - aie4_mailbox_start() clears ndev->aie.mgmt_chann right after freeing it. Do the same here. The create path itself is not affected: when aie2_xrs_load() fails, xrs_allocate_resource() removes the solver node without calling ->unload, and aie2_hwctx_init() frees hwctx->priv, so the stale pointer never outlives the structure holding it. Starting a channel can fail today without this patch: the ring buffer sizes firmware reports are rejected unless both are powers of two, and request_irq() can fail.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99730

mm/filemap: finish fault cleanup before dropping the fault lock

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: finish fault cleanup before dropping the fault lock On a retried fault, a fatal signal interrupting the folio lock wait makes lock_folio_maybe_drop_mmap() drop the fault lock without pinning the file. However, filemap_fault() may still need to release mapping->invalidate_lock. A concurrent munmap() can release the last file reference and free the mapping before that unlock. Defer dropping the fault lock to filemap_fault()'s retry cleanup, after releasing invalidate_lock. If the fault lock was already dropped for I/O, release the existing file reference instead. Keep the fault lock held for FAULT_FLAG_RETRY_NOWAIT as before.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99731

mm/filemap: don't lose a folio lock wakeup to a signal

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: don't lose a folio lock wakeup to a signal An exclusive waiter in folio_wait_bit_common() can leave the wait loop because of a fatal signal, then be woken by folio_unlock() before finish_wait(). If the waker did not hand over the lock, the waiter returns -EINTR without trying to acquire it. folio_wake_bit() stops after waking the first exclusive waiter, so this loses the wakeup and can leave other waiters asleep indefinitely on an unlocked folio. After finish_wait(), let a waiter woken without a lock handoff try once more to acquire the lock. If successful, return success so the caller's eventual unlock wakes the next waiter. Otherwise, the current lock owner will do so. Fix generated by an LLM and sent by Josef Bacik in private. [ david: clarify and simplify comment + description ]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99488

klist: avoid accesses after waking klist_remove()

In the Linux kernel, the following vulnerability has been resolved: klist: avoid accesses after waking klist_remove() klist_remove() waits until a node is unreferenced so that its caller can free the containing object. klist_release() currently publishes waiter->woken and wakes the waiter before its final accesses to the waiter and node. klist_remove() can then return, allowing its stack waiter and the containing object to be freed or reused while klist_release() is still running. In particular, bus_remove_driver() can free drv->p while __device_attach() walks the same bus klist with bus_for_each_drv(). On an arm64 Cortex-A72 system, an unpatched 7.2.0-rc3 kernel with CONFIG_PREEMPT_RT=y and CONFIG_KASAN=y reproduced the bug through the in-tree I2C/at24 path. KASAN reported a use-after-free in klist_dec_and_del() reached from klist_next()/bus_for_each_drv() while at24 was being unregistered. Clear n_klist and take a task reference before publishing woken. Use release/acquire accesses for that publication and wake the referenced task. The task reference keeps the waiter task alive if it returns and exits before wake_up_process().

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99489

HID: wacom: Redesign shared sibling data lifecycle

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Redesign shared sibling data lifecycle The Wacom driver coordinates state between sibling interfaces of the same physical device using a shared structure 'wacom_shared' inside 'wacom_hdev_data'. The driver kept a volatile representative pointer 'data->dev' pointing to a sibling 'hid_device' for physical path comparisons during sibling matching. This pointer management is fragile. When the representative device is disconnected, wacom_remove_shared_data() failed to clear/update 'data->dev', leading to a Use-After-Free vulnerability when subsequent sibling probes dereference the dangling 'data->dev' pointer. Resolve this issue by redesigning the sibling data lifecycle: - Eliminate the volatile 'data->dev' representative pointer completely - Redesign 'wacom_hdev_data' to store stable static copies of the required attributes upon first allocation: 'phys' path string, 'vendor', 'product' IDs and the sibling's 'device_type' - Use these static attributes for stable sibling matching in wacom_are_sibling() and wacom_get_hdev_data() This ensures sibling matching remains safe and stable even if individual siblings are dynamically added or removed. To secure the lifecycle against concurrent probe/disconnect races: - Switch kref_put() to kref_put_mutex() in wacom_remove_shared_data() to serialize refcount drops with list traversal and lookup - Modify wacom_release_shared_data() to assume the list lock is already held Also, do not accumulate the 'device_type' capability flag during subsequent sibling probes. Keeping only the first probed sibling's device_type exactly preserves the original sibling matching behavior without introducing side effects.

CVSS 3.1 · 4.6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99490

HID: wacom: Fix Use-After-Free in wacom_bamboo_pad

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_bamboo_pad wacom_bamboo_pad_pen_event() accesses wacom->shared->pen locklessly relative to wacom_remove_shared_data() which nullifies it. This can lead to a Use-After-Free if the sibling device is removed while events are being processed. Resolve this by introducing RCU protection for pen and touch pointers: - Annotate 'pen' and 'touch' in wacom_shared struct with __rcu. - Wrap lockless readers in wacom_bamboo_pad_pen_event() with rcu_read_lock() and rcu_dereference(). - Update writers in wacom_sys.c using rcu_assign_pointer(). - Use rcu_dereference_protected for comparisons under wacom_udev_list_lock. - Also use rcu_access_pointer in wacom_sibling_pending() and wacom_mode_change_work() to avoid warnings (while lockless access in the latter remains a pre-existing issue).

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99491

HID: wacom: Fix Use-After-Free in wacom_intuos_pad

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_intuos_pad wacom_intuos_pad() accesses wacom->shared->touch_input locklessly inside the interrupt handler context. If the Touch sibling device is disconnected, wacom_remove_shared_data() clears 'touch_input' outside any lock, creating a Time-of-Check to Time-of-Use (TOCTOU) race condition where a preempted reader in interrupt context dereferences the freed pointer, leading to a Use-After-Free. Resolve this by introducing RCU protection for the touch_input pointer: - Annotate 'touch_input' in wacom_shared struct with __rcu - Wrap all lockless readers in wacom_wac.c with guard(rcu)() and rcu_dereference() using a unified wacom_report_touch_mute() helper - Update writers in wacom_sys.c using rcu_assign_pointer() - Call synchronize_rcu() in wacom_remove_shared_data() to ensure all active RCU readers have finished before the input device is freed Also wrap wacom_set_shared_values() and touch/pen assignments in wacom_add_shared_data() inside the wacom_udev_list_lock to serialize concurrent probe assignments, and verify that 'shared->touch == hdev' before setting touch_input to prevent concurrent sibling probe state desynchronization.

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed
Vendors
Products