| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Do not re-initialize smc hashtables
INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(),
proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht
being reset even though hash entries already exist and are being used,
possibly resulting in a corrupted list.
Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in
smc_init(); it is implicitly initialised to zero anyhow. Add
HLIST_HEAD_INIT to the definitions for clarity. |
| Path traversal in the sshd-scp component of Apache MINA SSHD. Apache MINA SSHD is a Java library for client-side and server-side SSH.
The implementation of receiving files or directories via SCP did not validate filenames in SCP "C" or "D" commands. A malicious sender could send filenames containing paths, resulting in files to be written in attacker-controlled places.
The issue affects only
* applications that use no longer supported Apache MINA SSHD versions < 2.0.0 and use the SCP functions to receive files,
* or applications using sshd-scp in Apache MINA SSHD >= 2.0.0 to receive files.
Applications using Apache MINA SSHD >= 2.0.0 not using sshd-scp are not affected.
The issue is fixed in Apache MINA 2.19.0 and 3.0.0-M5. Affected applications are advised to upgrade to these versions. |
| A custom client can produce such an upload request to the BuildKit daemon that files can escape from the BuildKit-controlled state directory. The client needs to have valid permissions to access the BuildKit control API to issue builds, e.g., bypass authentication, etc. |
| No description is available for this CVE. |
| Pillow is a Python imaging library. Prior to 12.3.0, Pillow's public rank-filter API can trigger a native heap out-of-bounds write when given a very large odd filter size because ImageFilter.RankFilter.filter() calls image.expand(size // 2, size // 2) before rank-filter size validation and ImagingExpand() computes output dimensions with unchecked signed int arithmetic. This issue is fixed in version 12.3.0. |
| A possible unauthorized memory access flaw was found in the Linux kernel's cpu_entry_area mapping of X86 CPU data to memory, where a user may guess the location of exception stacks or other important data. Based on the previous CVE-2023-0597, the 'Randomize per-cpu entry area' feature was implemented in /arch/x86/mm/cpu_entry_area.c, which works through the init_cea_offsets() function when KASLR is enabled. However, despite this feature, there is still a risk of per-cpu entry area leaks. This issue could allow a local user to gain access to some important data with memory in an expected location and potentially escalate their privileges on the system. |
| Pillow is a Python imaging library. From 8.2.0 through 12.2.0, src/libImaging/Jpeg2KDecode.c accumulates total_component_width across every tile in a JPEG2000 image instead of recomputing it per tile, allowing a crafted tiled JPEG2000 file to force substantially higher transient memory usage and trigger out-of-memory failures during decoding. This issue is fixed in version 12.3.0. |
| Allwinner H616 TV Box TV98 has ADB enabled and exposed to the network on production. An attacker could request for ADB authorization and gain root level privileges if the victim allows access. |
| FluxInk (formerly Sunia SPB Peripheral) Color Management Driver (TcnPeripheral64.sys) 1.0.7.2 allows local privilege escalation for a standard user account via arbitrary physical memory mapping at \Device\PhysicalMemory. Fixed in version 1.0.7.6. The fixed driver is currently available in the Windows 11 25H2 HLK (Hardware Lab Kit). The fixed driver may be available through Windows Update or from Lenovo directly. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix setup list UAF on proc write error
snd_pcm_oss_proc_write() links a newly allocated setup entry into the
OSS setup list before duplicating the task name. If the task-name
allocation fails, the error path frees the already linked entry and
leaves setup_list pointing at freed memory.
A later OSS device open can then walk the stale list entry in
snd_pcm_oss_look_for_setup() and dereference freed memory.
Allocate the task name and initialize the setup entry before publishing
the entry on setup_list. Also fetch the initial proc read iterator only
after taking setup_mutex, so all setup_list traversal follows the same
list lifetime rules. |
| A vulnerability in the CLI of Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an authenticated, local attacker to execute arbitrary commands as root by supplying a crafted file to the affected system.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by uploading a crafted file to the affected system. A successful exploit could allow the attacker to perform command injection attacks on an affected system and elevate their privileges as the root user.
To exploit this vulnerability, the attacker must have netadmin privileges on the affected system. This would require valid credentials or exploitation of or . Cisco is not aware of successful exploitation by other methods. Cisco has observed limited cases where the exploitation of this bug resulted in a configuration change pushed to edge devices.
Cisco recommends that customers upgrade to the fixed software that is documented in the that was published on May 14, 2026, and verify the configuration of the edge devices. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: safe_serial: fix memory corruption with small endpoint
Make sure that the bulk-out buffer size is at least eight bytes to avoid
user-controlled slab corruption in "safe" mode should a malicious device
report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: cypress_m8: fix memory corruption with small endpoint
Make sure that the interrupt-out endpoint max packet size is at least
eight bytes to avoid user-controlled slab corruption or NULL-pointer
dereference should a malicious device report a smaller size. |
| IBM Langflow OSS 1.0.0 through 1.10.0 Langflow 1.9.0 could allow server-side request forgery (SSRF) due to insecure default configuration and incomplete enforcement of the SSRF protection mechanism. |
| The Free Builder for Elementor WordPress plugin before 1.6.7 does not sanitise submitted contact form field values before storing them and outputting them in the admin dashboard, allowing unauthenticated attackers to perform Stored Cross-Site Scripting attacks that execute when a logged-in administrator views the form submissions. |
| Twig is a template language for PHP. Prior to 3.27.0, the per-template filter, tag, and function allow-list verdict is computed when a Template instance is constructed and can remain cached after sandbox state changes between renders, allowing a later sandboxed render to reuse a template that was originally checked with a different or empty policy. This issue is fixed in version 3.27.0. |
| Low-privileged authenticated Server-Side Request Forgery (SSRF)
vulnerability in Apache Syncope via Connectors and Resources check.
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.6, from 4.1.0-M0 through 4.1.1.
Users are recommended to upgrade to version 4.0.7 / 4.1.2, which fix this issue. |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the denylist that neutralizes dangerous file uploads (`Helper::$restricted_extensions`) is incomplete: it does not cover the `.pht` extension. The authenticated upload endpoint `POST /uploads/upload` (`SecureController@upload`) stores files with their original extension into the web-accessible directory `storage/app/public/uploads/` (served at `/storage/uploads/`). On the standard Apache + `libapache2-mod-php` deployment, the default handler `<FilesMatch ".+\.ph(ar|p[3457]?|t|tml)$">` executes `.pht`, so **any authenticated agent can upload a `.pht` web shell and run arbitrary commands as the web-server user** (`www-data`). This is a direct bypass of the fix for CVE-2025-48471, which added `phtml`/`phar` but not `pht` (nor `phtm`, `phps`). Version 1.8.224 contains an updated fix. |
| A weakness has been identified in D-Link DNS-320 1.0.2. The impacted element is an unknown function of the file /web/jquery/uploader/uploadify.php. This manipulation of the argument https:/ucn9h68n9289.feishu.cn/wiki/JJcTwHz7aiKeq6kSItMcoeSUnMc?from=from_copylink causes unrestricted upload. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. |
| Tornado is a Python web framework and asynchronous networking library. Prior to 6.5.6, SimpleAsyncHTTPClient shallow-copied redirected requests and removed only the Host header, leaving Authorization, auth_username, auth_password, and auth_mode in place when a redirect changed scheme, host, or port. This issue is fixed in version 6.5.6. |
