| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: Fix ordering of iput() and watched_objects decrement
Ensure the superblock is kept alive until we're done with iput().
Holding a reference to an inode is not allowed unless we ensure the
superblock stays alive, which fsnotify does by keeping the
watched_objects count elevated, so iput() must happen before the
watched_objects decrement.
This can lead to a UAF of something like sb->s_fs_info in tmpfs, but the
UAF is hard to hit because race orderings that oops are more likely, thanks
to the CHECK_DATA_CORRUPTION() block in generic_shutdown_super().
Also, ensure that fsnotify_put_sb_watched_objects() doesn't call
fsnotify_sb_watched_objects() on a superblock that may have already been
freed, which would cause a UAF read of sb->s_fsnotify_info. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix possible UAF in sctp_v6_available()
A lockdep report [1] with CONFIG_PROVE_RCU_LIST=y hints
that sctp_v6_available() is calling dev_get_by_index_rcu()
and ipv6_chk_addr() without holding rcu.
[1]
=============================
WARNING: suspicious RCU usage
6.12.0-rc5-virtme #1216 Tainted: G W
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by sctp_hello/31495:
#0: ffff9f1ebbdb7418 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_bind (./arch/x86/include/asm/jump_label.h:27 net/sctp/socket.c:315) sctp
stack backtrace:
CPU: 7 UID: 0 PID: 31495 Comm: sctp_hello Tainted: G W 6.12.0-rc5-virtme #1216
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
dev_get_by_index_rcu (net/core/dev.c:876 (discriminator 7))
sctp_v6_available (net/sctp/ipv6.c:701) sctp
sctp_do_bind (net/sctp/socket.c:400 (discriminator 1)) sctp
sctp_bind (net/sctp/socket.c:320) sctp
inet6_bind_sk (net/ipv6/af_inet6.c:465)
? security_socket_bind (security/security.c:4581 (discriminator 1))
__sys_bind (net/socket.c:1848 net/socket.c:1869)
? do_user_addr_fault (./include/linux/rcupdate.h:347 ./include/linux/rcupdate.h:880 ./include/linux/mm.h:729 arch/x86/mm/fault.c:1340)
? do_user_addr_fault (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:98 (discriminator 13) ./include/linux/rcupdate.h:882 (discriminator 13) ./include/linux/mm.h:729 (discriminator 13) arch/x86/mm/fault.c:1340 (discriminator 13))
__x64_sys_bind (net/socket.c:1877 (discriminator 1) net/socket.c:1875 (discriminator 1) net/socket.c:1875 (discriminator 1))
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f59b934a1e7
Code: 44 00 00 48 8b 15 39 8c 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 09 8c 0c 00 f7 d8 64 89 01 48
All code
========
0: 44 00 00 add %r8b,(%rax)
3: 48 8b 15 39 8c 0c 00 mov 0xc8c39(%rip),%rdx # 0xc8c43
a: f7 d8 neg %eax
c: 64 89 02 mov %eax,%fs:(%rdx)
f: b8 ff ff ff ff mov $0xffffffff,%eax
14: eb bd jmp 0xffffffffffffffd3
16: 66 2e 0f 1f 84 00 00 cs nopw 0x0(%rax,%rax,1)
1d: 00 00 00
20: 0f 1f 00 nopl (%rax)
23: b8 31 00 00 00 mov $0x31,%eax
28: 0f 05 syscall
2a:* 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax <-- trapping instruction
30: 73 01 jae 0x33
32: c3 ret
33: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c43
3a: f7 d8 neg %eax
3c: 64 89 01 mov %eax,%fs:(%rcx)
3f: 48 rex.W
Code starting with the faulting instruction
===========================================
0: 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax
6: 73 01 jae 0x9
8: c3 ret
9: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c19
10: f7 d8 neg %eax
12: 64 89 01 mov %eax,%fs:(%rcx)
15: 48 rex.W
RSP: 002b:00007ffe2d0ad398 EFLAGS: 00000202 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 00007ffe2d0ad3d0 RCX: 00007f59b934a1e7
RDX: 000000000000001c RSI: 00007ffe2d0ad3d0 RDI: 0000000000000005
RBP: 0000000000000005 R08: 1999999999999999 R09: 0000000000000000
R10: 00007f59b9253298 R11: 000000000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer
When hvs is released, there is a possibility that vsk->trans may not
be initialized to NULL, which could lead to a dangling pointer.
This issue is resolved by initializing vsk->trans to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix use-after-free of network namespace.
Recently, we got a customer report that CIFS triggers oops while
reconnecting to a server. [0]
The workload runs on Kubernetes, and some pods mount CIFS servers
in non-root network namespaces. The problem rarely happened, but
it was always while the pod was dying.
The root cause is wrong reference counting for network namespace.
CIFS uses kernel sockets, which do not hold refcnt of the netns that
the socket belongs to. That means CIFS must ensure the socket is
always freed before its netns; otherwise, use-after-free happens.
The repro steps are roughly:
1. mount CIFS in a non-root netns
2. drop packets from the netns
3. destroy the netns
4. unmount CIFS
We can reproduce the issue quickly with the script [1] below and see
the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled.
When the socket is TCP, it is hard to guarantee the netns lifetime
without holding refcnt due to async timers.
Let's hold netns refcnt for each socket as done for SMC in commit
9744d2bf1976 ("smc: Fix use-after-free in tcp_write_timer_handler().").
Note that we need to move put_net() from cifs_put_tcp_session() to
clean_demultiplex_info(); otherwise, __sock_create() still could touch a
freed netns while cifsd tries to reconnect from cifs_demultiplex_thread().
Also, maybe_get_net() cannot be put just before __sock_create() because
the code is not under RCU and there is a small chance that the same
address happened to be reallocated to another netns.
[0]:
CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting...
CIFS: Serverclose failed 4 times, giving up
Unable to handle kernel paging request at virtual address 14de99e461f84a07
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[14de99e461f84a07] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs
CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1
Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fib_rules_lookup+0x44/0x238
lr : __fib_lookup+0x64/0xbc
sp : ffff8000265db790
x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01
x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580
x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500
x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002
x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294
x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0
x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500
Call trace:
fib_rules_lookup+0x44/0x238
__fib_lookup+0x64/0xbc
ip_route_output_key_hash_rcu+0x2c4/0x398
ip_route_output_key_hash+0x60/0x8c
tcp_v4_connect+0x290/0x488
__inet_stream_connect+0x108/0x3d0
inet_stream_connect+0x50/0x78
kernel_connect+0x6c/0xac
generic_ip_conne
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier()
The scmi_dev->name is released prematurely in __scmi_device_destroy(),
which causes slab-use-after-free when accessing scmi_dev->name in
scmi_bus_notifier(). So move the release of scmi_dev->name to
scmi_device_release() to avoid slab-use-after-free.
| BUG: KASAN: slab-use-after-free in strncmp+0xe4/0xec
| Read of size 1 at addr ffffff80a482bcc0 by task swapper/0/1
|
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.6.38-debug #1
| Hardware name: Qualcomm Technologies, Inc. SA8775P Ride (DT)
| Call trace:
| dump_backtrace+0x94/0x114
| show_stack+0x18/0x24
| dump_stack_lvl+0x48/0x60
| print_report+0xf4/0x5b0
| kasan_report+0xa4/0xec
| __asan_report_load1_noabort+0x20/0x2c
| strncmp+0xe4/0xec
| scmi_bus_notifier+0x5c/0x54c
| notifier_call_chain+0xb4/0x31c
| blocking_notifier_call_chain+0x68/0x9c
| bus_notify+0x54/0x78
| device_del+0x1bc/0x840
| device_unregister+0x20/0xb4
| __scmi_device_destroy+0xac/0x280
| scmi_device_destroy+0x94/0xd0
| scmi_chan_setup+0x524/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20
|
| Allocated by task 1:
| kasan_save_stack+0x2c/0x54
| kasan_set_track+0x2c/0x40
| kasan_save_alloc_info+0x24/0x34
| __kasan_kmalloc+0xa0/0xb8
| __kmalloc_node_track_caller+0x6c/0x104
| kstrdup+0x48/0x84
| kstrdup_const+0x34/0x40
| __scmi_device_create.part.0+0x8c/0x408
| scmi_device_create+0x104/0x370
| scmi_chan_setup+0x2a0/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20
|
| Freed by task 1:
| kasan_save_stack+0x2c/0x54
| kasan_set_track+0x2c/0x40
| kasan_save_free_info+0x38/0x5c
| __kasan_slab_free+0xe8/0x164
| __kmem_cache_free+0x11c/0x230
| kfree+0x70/0x130
| kfree_const+0x20/0x40
| __scmi_device_destroy+0x70/0x280
| scmi_device_destroy+0x94/0xd0
| scmi_chan_setup+0x524/0x750
| scmi_probe+0x7fc/0x1508
| platform_probe+0xc4/0x19c
| really_probe+0x32c/0x99c
| __driver_probe_device+0x15c/0x3c4
| driver_probe_device+0x5c/0x170
| __driver_attach+0x1c8/0x440
| bus_for_each_dev+0xf4/0x178
| driver_attach+0x3c/0x58
| bus_add_driver+0x234/0x4d4
| driver_register+0xf4/0x3c0
| __platform_driver_register+0x60/0x88
| scmi_driver_init+0xb0/0x104
| do_one_initcall+0xb4/0x664
| kernel_init_freeable+0x3c8/0x894
| kernel_init+0x24/0x1e8
| ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT
In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed
to be either root or ingress. This assumption is bogus since it's valid
to create egress qdiscs with major handle ffff:
Budimir Markovic found that for qdiscs like DRR that maintain an active
class list, it will cause a UAF with a dangling class pointer.
In 066a3b5b2346, the concern was to avoid iterating over the ingress
qdisc since its parent is itself. The proper fix is to stop when parent
TC_H_ROOT is reached because the only way to retrieve ingress is when a
hierarchy which does not contain a ffff: major handle call into
qdisc_lookup with TC_H_MAJ(TC_H_ROOT).
In the scenario where major ffff: is an egress qdisc in any of the tree
levels, the updates will also propagate to TC_H_ROOT, which then the
iteration must stop.
net/sched/sch_api.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-) |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: do not leave a dangling sk pointer in __smc_create()
Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when
it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC:
smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0
WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563
Modules linked in:
CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563
Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7
RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246
RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50
R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8
R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0
FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sock_create net/socket.c:1616 [inline]
__sys_socket_create net/socket.c:1653 [inline]
__sys_socket+0x150/0x3c0 net/socket.c:1700
__do_sys_socket net/socket.c:1714 [inline]
__se_sys_socket net/socket.c:1712 [inline]
For reference, see commit 2d859aff775d ("Merge branch
'do-not-leave-dangling-sk-pointers-in-pf-create-functions'") |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab-use-after-free in ksmbd_smb2_session_create
There is a race condition between ksmbd_smb2_session_create and
ksmbd_expire_session. This patch add missing sessions_table_lock
while adding/deleting session from global session table. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab-use-after-free in smb3_preauth_hash_rsp
ksmbd_user_session_put should be called under smb3_preauth_hash_rsp().
It will avoid freeing session before calling smb3_preauth_hash_rsp(). |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: avoid vport access in idpf_get_link_ksettings
When the device control plane is removed or the platform
running device control plane is rebooted, a reset is detected
on the driver. On driver reset, it releases the resources and
waits for the reset to complete. If the reset fails, it takes
the error path and releases the vport lock. At this time if the
monitoring tools tries to access link settings, it call traces
for accessing released vport pointer.
To avoid it, move link_speed_mbps to netdev_priv structure
which removes the dependency on vport pointer and the vport lock
in idpf_get_link_ksettings. Also use netif_carrier_ok()
to check the link status and adjust the offsetof to use link_up
instead of link_speed_mbps. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_edgeport: fix use after free in debug printk
The "dev_dbg(&urb->dev->dev, ..." which happens after usb_free_urb(urb)
is a use after free of the "urb" pointer. Store the "dev" pointer at the
start of the function to avoid this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
During loopback communication, a dangling pointer can be created in
vsk->trans, potentially leading to a Use-After-Free condition. This
issue is resolved by initializing vsk->trans to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: Fix use-after-free while sending the offloading packet
KASAN reports the following UAF. The metadata_dst, which is used to
store the SCI value for macsec offload, is already freed by
metadata_dst_free() in macsec_free_netdev(), while driver still use it
for sending the packet.
To fix this issue, dst_release() is used instead to release
metadata_dst. So it is not freed instantly in macsec_free_netdev() if
still referenced by skb.
BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714
[...]
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x60
print_report+0xc1/0x600
kasan_report+0xab/0xe0
mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
dev_hard_start_xmit+0x120/0x530
sch_direct_xmit+0x149/0x11e0
__qdisc_run+0x3ad/0x1730
__dev_queue_xmit+0x1196/0x2ed0
vlan_dev_hard_start_xmit+0x32e/0x510 [8021q]
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
macsec_start_xmit+0x13e9/0x2340
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
ip6_finish_output2+0x923/0x1a70
ip6_finish_output+0x2d7/0x970
ip6_output+0x1ce/0x3a0
NF_HOOK.constprop.0+0x15f/0x190
mld_sendpack+0x59a/0xbd0
mld_ifc_work+0x48a/0xa80
process_one_work+0x5aa/0xe50
worker_thread+0x79c/0x1290
kthread+0x28f/0x350
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 3922:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0x77/0x90
__kmalloc_noprof+0x188/0x400
metadata_dst_alloc+0x1f/0x4e0
macsec_newlink+0x914/0x1410
__rtnl_newlink+0xe08/0x15b0
rtnl_newlink+0x5f/0x90
rtnetlink_rcv_msg+0x667/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4011:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x50
poison_slab_object+0x10c/0x190
__kasan_slab_free+0x11/0x30
kfree+0xe0/0x290
macsec_free_netdev+0x3f/0x140
netdev_run_todo+0x450/0xc70
rtnetlink_rcv_msg+0x66f/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: Fix use-after-free in get_info()
ip6table_nat module unload has refcnt warning for UAF. call trace is:
WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80
Modules linked in: ip6table_nat(-)
CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:module_put+0x6f/0x80
Call Trace:
<TASK>
get_info+0x128/0x180
do_ip6t_get_ctl+0x6a/0x430
nf_getsockopt+0x46/0x80
ipv6_getsockopt+0xb9/0x100
rawv6_getsockopt+0x42/0x190
do_sock_getsockopt+0xaa/0x180
__sys_getsockopt+0x70/0xc0
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0xa2/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Concurrent execution of module unload and get_info() trigered the warning.
The root cause is as follows:
cpu0 cpu1
module_exit
//mod->state = MODULE_STATE_GOING
ip6table_nat_exit
xt_unregister_template
kfree(t)
//removed from templ_list
getinfo()
t = xt_find_table_lock
list_for_each_entry(tmpl, &xt_templates[af]...)
if (strcmp(tmpl->name, name))
continue; //table not found
try_module_get
list_for_each_entry(t, &xt_net->tables[af]...)
return t; //not get refcnt
module_put(t->me) //uaf
unregister_pernet_subsys
//remove table from xt_net list
While xt_table module was going away and has been removed from
xt_templates list, we couldnt get refcnt of xt_table->me. Check
module in xt_net->tables list re-traversal to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids()
Mounting btrfs from two images (which have the same one fsid and two
different dev_uuids) in certain executing order may trigger an UAF for
variable 'device->bdev_file' in __btrfs_free_extra_devids(). And
following are the details:
1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs
devices by ioctl(BTRFS_IOC_SCAN_DEV):
/ btrfs_device_1 → loop0
fs_device
\ btrfs_device_2 → loop1
2. mount /dev/loop0 /mnt
btrfs_open_devices
btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0)
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
fail: btrfs_close_devices // -ENOMEM
btrfs_close_bdev(btrfs_device_1)
fput(btrfs_device_1->bdev_file)
// btrfs_device_1->bdev_file is freed
btrfs_close_bdev(btrfs_device_2)
fput(btrfs_device_2->bdev_file)
3. mount /dev/loop1 /mnt
btrfs_open_devices
btrfs_get_bdev_and_sb(&bdev_file)
// EIO, btrfs_device_1->bdev_file is not assigned,
// which points to a freed memory area
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
btrfs_free_extra_devids
if (btrfs_device_1->bdev_file)
fput(btrfs_device_1->bdev_file) // UAF !
Fix it by setting 'device->bdev_file' as 'NULL' after closing the
btrfs_device in btrfs_close_one_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Stop the active perfmon before being destroyed
Upon closing the file descriptor, the active performance monitor is not
stopped. Although all perfmons are destroyed in `vc4_perfmon_close_file()`,
the active performance monitor's pointer (`vc4->active_perfmon`) is still
retained.
If we open a new file descriptor and submit a few jobs with performance
monitors, the driver will attempt to stop the active performance monitor
using the stale pointer in `vc4->active_perfmon`. However, this pointer
is no longer valid because the previous process has already terminated,
and all performance monitors associated with it have been destroyed and
freed.
To fix this, when the active performance monitor belongs to a given
process, explicitly stop it before destroying and freeing it. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmode should keep reference to parent
The altmode device release refers to its parent device, but without keeping
a reference to it.
When registering the altmode, get a reference to the parent and put it in
the release function.
Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues
like this:
[ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000)
[ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 46.612867] ==================================================================
[ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129
[ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48
[ 46.614538]
[ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535
[ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 46.616042] Workqueue: events kobject_delayed_cleanup
[ 46.616446] Call Trace:
[ 46.616648] <TASK>
[ 46.616820] dump_stack_lvl+0x5b/0x7c
[ 46.617112] ? typec_altmode_release+0x38/0x129
[ 46.617470] print_report+0x14c/0x49e
[ 46.617769] ? rcu_read_unlock_sched+0x56/0x69
[ 46.618117] ? __virt_addr_valid+0x19a/0x1ab
[ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d
[ 46.618807] ? typec_altmode_release+0x38/0x129
[ 46.619161] kasan_report+0x8d/0xb4
[ 46.619447] ? typec_altmode_release+0x38/0x129
[ 46.619809] ? process_scheduled_works+0x3cb/0x85f
[ 46.620185] typec_altmode_release+0x38/0x129
[ 46.620537] ? process_scheduled_works+0x3cb/0x85f
[ 46.620907] device_release+0xaf/0xf2
[ 46.621206] kobject_delayed_cleanup+0x13b/0x17a
[ 46.621584] process_scheduled_works+0x4f6/0x85f
[ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10
[ 46.622353] ? hlock_class+0x31/0x9a
[ 46.622647] ? lock_acquired+0x361/0x3c3
[ 46.622956] ? move_linked_works+0x46/0x7d
[ 46.623277] worker_thread+0x1ce/0x291
[ 46.623582] ? __kthread_parkme+0xc8/0xdf
[ 46.623900] ? __pfx_worker_thread+0x10/0x10
[ 46.624236] kthread+0x17e/0x190
[ 46.624501] ? kthread+0xfb/0x190
[ 46.624756] ? __pfx_kthread+0x10/0x10
[ 46.625015] ret_from_fork+0x20/0x40
[ 46.625268] ? __pfx_kthread+0x10/0x10
[ 46.625532] ret_from_fork_asm+0x1a/0x30
[ 46.625805] </TASK>
[ 46.625953]
[ 46.626056] Allocated by task 678:
[ 46.626287] kasan_save_stack+0x24/0x44
[ 46.626555] kasan_save_track+0x14/0x2d
[ 46.626811] __kasan_kmalloc+0x3f/0x4d
[ 46.627049] __kmalloc_noprof+0x1bf/0x1f0
[ 46.627362] typec_register_port+0x23/0x491
[ 46.627698] cros_typec_probe+0x634/0xbb6
[ 46.628026] platform_probe+0x47/0x8c
[ 46.628311] really_probe+0x20a/0x47d
[ 46.628605] device_driver_attach+0x39/0x72
[ 46.628940] bind_store+0x87/0xd7
[ 46.629213] kernfs_fop_write_iter+0x1aa/0x218
[ 46.629574] vfs_write+0x1d6/0x29b
[ 46.629856] ksys_write+0xcd/0x13b
[ 46.630128] do_syscall_64+0xd4/0x139
[ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 46.630820]
[ 46.630946] Freed by task 48:
[ 46.631182] kasan_save_stack+0x24/0x44
[ 46.631493] kasan_save_track+0x14/0x2d
[ 46.631799] kasan_save_free_info+0x3f/0x4d
[ 46.632144] __kasan_slab_free+0x37/0x45
[ 46.632474]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Don't free job in TDR
Freeing job in TDR is not safe as TDR can pass the run_job thread
resulting in UAF. It is only safe for free job to naturally be called by
the scheduler. Rather free job in TDR, add to pending list.
(cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bpf: must hold reference on net namespace
BUG: KASAN: slab-use-after-free in __nf_unregister_net_hook+0x640/0x6b0
Read of size 8 at addr ffff8880106fe400 by task repro/72=
bpf_nf_link_release+0xda/0x1e0
bpf_link_free+0x139/0x2d0
bpf_link_release+0x68/0x80
__fput+0x414/0xb60
Eric says:
It seems that bpf was able to defer the __nf_unregister_net_hook()
after exit()/close() time.
Perhaps a netns reference is missing, because the netns has been
dismantled/freed already.
bpf_nf_link_attach() does :
link->net = net;
But I do not see a reference being taken on net.
Add such a reference and release it after hook unreg.
Note that I was unable to get syzbot reproducer to work, so I
do not know if this resolves this splat. |
