| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler backend contains a bug where translating the table.grow operator causes the result to be incorrectly typed. For 32-bit tables this means that the result of the operator, internally in Winch, is tagged as a 64-bit value instead of a 32-bit value. This invalid internal representation of Winch's compiler state compounds into further issues depending on how the value is consumed. The primary consequence of this bug is that bytes in the host's address space can be stored/read from. This is only applicable to the 16 bytes before linear memory, however, as the only significant return value of table.grow that can be misinterpreted is -1. The bytes before linear memory are, by default, unmapped memory. Wasmtime will detect this fault and abort the process, however, because wasm should not be able to access these bytes. Overall this this bug in Winch represents a DoS vector by crashing the host process, a correctness issue within Winch, and a possible leak of up to 16-bytes before linear memory. Wasmtime's default compiler is Cranelift, not Winch, and Wasmtime's default settings are to place guard pages before linear memory. This means that Wasmtime's default configuration is not affected by this issue, and when explicitly choosing Winch Wasmtime's otherwise default configuration leads to a DoS. Disabling guard pages before linear memory is required to possibly leak up to 16-bytes of host data. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could corrupt host data structures depending on Wasmtime's configuration. Wasmtime by default reserves 4GiB of virtual memory for a guest's linear memory meaning that this bug will by default on hosts cause the host to hit unmapped memory and abort the process due to an unhandled fault. Wasmtime can be configured, however, to reserve less memory for a guest and to remove all guard pages, so some configurations of Wasmtime may lead to corruption of data outside of a guest's linear memory, such as host data structures or other guests's linear memories. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| dizqueTV 1.5.3 contains a remote code execution vulnerability that allows attackers to inject arbitrary commands through the FFMPEG Executable Path settings. Attackers can modify the executable path with shell commands to read system files like /etc/passwd by exploiting improper input validation. |
| OS command injection vulnerability exists in Deco BE65 Pro firmware versions prior to "Deco BE65 Pro(JP)_V1_1.1.2 Build 20250123". If this vulnerability is exploited, an arbitrary OS command may be executed by the user who can log in to the device. |
| This CVE affects only Windows worker nodes. Your worker node is vulnerable to this issue if it is running one of the affected versions listed below. |
| Tiki Wiki CMS – CWE-80: Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) |
| Tiki Wiki CMS – CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') |
| There are multiple unauthorized remote command execution vulnerabilities in the H3C ER2200G2, ERG2-450W, ERG2-1200W, ERG2-1350W, NR1200W series routers before ERG2AW-MNW100-R1117; H3C ER3100G2, ER3200G2, ER3260G2, ER5100G2, ER5200G2, ER6300G2, ER8300G2, ER8300G2-X series routers before ERHMG2-MNW100-R1126; GR3200, GR5200, GR8300 and other series routers before MiniGR1B0V100R018L50; GR-1800AX before MiniGRW1B0V100R009L50; GR-3000AX before SWBRW1A0V100R007L50; and GR-5400AX before SWBRW1B0V100R009L50. Attackers can bypass authentication by including specially crafted text in the request URL or message header, and then inject arbitrary malicious commands into some fields related to ACL access control list and user group functions and execute to obtain the highest ROOT privileges of remote devices, thereby completely taking over the remote target devices. |
| An OS command injection vulnerability exists in Vinci Protocol Analyzer that could allow an attacker to escalate privileges and perform code execution on affected system. |
| The theme.php file in SDCMS 2.8 has a command execution vulnerability that allows for the execution of system commands |
| A local user with administrative access rights can enter specialy crafted values for settings at the user interface (UI) of the TwinCAT Package Manager which then causes arbitrary OS commands to be executed. |
| jupyterlab-git is a JupyterLab extension for version control using Git. On many platforms, a third party can create a Git repository under a name that includes a shell command substitution string in the syntax $(<command>). These directory names are allowed in macOS and a majority of Linux distributions. If a user starts jupyter-lab in a parent directory of this inappropriately-named Git repository, opens it, and clicks "Git > Open Git Repository in Terminal" from the menu bar, then the injected command <command> is run in the user's shell without the user's permission. This issue is occurring because when that menu entry is clicked, jupyterlab-git opens the terminal and runs cd <git-repo-path> through the shell to set the current directory. Doing so runs any command substitution strings present in the directory name, which leads to the command injection issue described here. A previous patch provided an incomplete fix. This vulnerability is fixed in 0.51.1. |
| A vulnerability exists in the Opto22 Groov Manage REST API on GRV-EPIC and groov RIO Products that allows remote code execution with root privileges. When a POST request is executed against the vulnerable endpoint, the application reads certain header details and unsafely uses these values to build commands, allowing an attacker with administrative privileges to inject arbitrary commands that execute as root. |
| A security flaw has been discovered in Ruijie NBR2100G-E up to 20250919. Affected by this issue is the function listAction of the file /itbox_pi/branch_passw.php?a=list. Performing manipulation of the argument city results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited. Other parameters might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way. |
| NVIDIA WebDataset for all platforms contains a vulnerability where an attacker could execute arbitrary code with elevated permissions. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, information disclosure, and denial of service. |
| Out-of-bounds Write vulnerability was discovered in Open Design Alliance Drawings SDK before 2025.10. Reading crafted DWF file and missing proper checks on received SectionIterator data can trigger an unhandled exception. This can allow attackers to cause a crash, potentially enabling a denial-of-service attack (Crash, Exit, or Restart) or possible code execution. |
| FLIR Thermal Camera PT-Series firmware version 8.0.0.64 contains multiple unauthenticated remote command injection vulnerabilities in the controllerFlirSystem.php script. Attackers can execute arbitrary system commands as root by exploiting unsanitized POST parameters in the execFlirSystem() function through shell_exec() calls. Exploitation evidence was observed by the Shadowserver Foundation on 2026-01-06 (UTC). |
| Out-of-bounds vulnerability in EMF Recode processing of Generic Plus PCL6 Printer Driver / Generic Plus UFR II Printer Driver / Generic Plus LIPS4 Printer Driver / Generic Plus LIPSLX Printer Driver / Generic Plus PS Printer Driver / Generic FAX Printer Driver / UFRII LT Printer Driver / CARPS2 Printer Driver / PDF Driver / LIPS4 Printer Driver / LIPSLX Printer Driver / UFR II Printer Driver / PS Printer Driver / PCL6 Printer Driver |
