| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: macsec: Fix offload support for NETDEV_UNREGISTER event
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.
Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event. |
| A flaw was found in the interactive shell of the xmllint command-line tool, used for parsing XML files. When a user inputs an overly long command, the program does not check the input size properly, which can cause it to crash. This issue might allow attackers to run harmful code in rare configurations without modern protections. |
| A vulnerability was found in Monitorr up to 1.7.6m. It has been classified as problematic. This affects an unknown part of the file assets/config/_installation/mkdbajax.php of the component Installer. The manipulation of the argument datadir leads to improper input validation. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Wikimedia Foundation Mediawiki - GoogleDocs4MW Extension allows Cross-Site Scripting (XSS).This issue affects Mediawiki - GoogleDocs4MW Extension: from 1.42.X before 1.42.7, from 1.43.X before 1.43.2. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Wikimedia Foundation Mediawiki - CampaignEvents Extension allows Cross-Site Scripting (XSS).This issue affects Mediawiki - CampaignEvents Extension: from 1.43.X before 1.43.2. |
| A flaw was found in the libssh implements abstract layer for message digest (MD) operations implemented by different supported crypto backends. The return values from these were not properly checked, which could cause low-memory situations failures, NULL dereferences, crashes, or usage of the uninitialized memory as an input for the KDF. In this case, non-matching keys will result in decryption/integrity failures, terminating the connection. |
| Versions of the package spatie/browsershot before 5.0.1 are vulnerable to Improper Input Validation due to improper URL validation in the setUrl method.
An attacker can exploit this vulnerability by using leading whitespace (%20) before the file:// protocol, resulting in Local File Inclusion, which allows the attacker to read sensitive files on the server. |
| Versions of the package spatie/browsershot before 5.0.3 are vulnerable to Improper Input Validation due to improper URL validation through the setUrl method. An attacker can exploit this vulnerability by utilizing view-source:file://, which allows for arbitrary file reading on a local file.
**Note:**
This is a bypass of the fix for [CVE-2024-21544](https://security.snyk.io/vuln/SNYK-PHP-SPATIEBROWSERSHOT-8496745). |
| Path Traversal vulnerability in ONLYOFFICE Document Server before v8.0.1 allows a remote attacker to copy arbitrary files by manipulating the fileExt parameter in the /example/editor endpoint, leading to unauthorized access to sensitive files and potential Denial of Service (DoS). |
| A flaw was found in Libtiff. This vulnerability is a "write-what-where" condition, triggered when the library processes a specially crafted TIFF image file.
By providing an abnormally large image height value in the file's metadata, an attacker can trick the library into writing attacker-controlled color data to an arbitrary memory location. This memory corruption can be exploited to cause a denial of service (application crash) or to achieve arbitrary code execution with the permissions of the user. |
| A container privilege escalation flaw was found in KServe ModelMesh container images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WordPress allows Stored XSS. WordPress core security team is aware of the issue and working on a fix. This is low severity vulnerability that requires an attacker to have Author or higher user privileges to execute the attack vector.This issue affects WordPress: from 6.8 through 6.8.2, from 6.7 through 6.7.3, from 6.6 through 6.6.3, from 6.5 through 6.5.6, from 6.4 through 6.4.6, from 6.3 through 6.3.6, from 6.2 through 6.2.7, from 6.1 through 6.1.8, from 6.0 through 6.0.10, from 5.9 through 5.9.11, from 5.8 through 5.8.11, from 5.7 through 5.7.13, from 5.6 through 5.6.15, from 5.5 through 5.5.16, from 5.4 through 5.4.17, from 5.3 through 5.3.19, from 5.2 through 5.2.22, from 5.1 through 5.1.20, from 5.0 through 5.0.23, from 4.9 through 4.9.27, from 4.8 through 4.8.26, from 4.7 through 4.7.30. |
| Insertion of Sensitive Information Into Sent Data vulnerability in WordPress allows Retrieve Embedded Sensitive Data. The WordPress Core security team is aware of the issue and is already working on a fix. This is a low-severity vulnerability. Contributor-level privileges required in order to exploit it.
This issue affects WordPress: from 6.8 through 6.8.2, from 6.7 through 6.7.3, from 6.6 through 6.6.3, from 6.5 through 6.5.6, from 6.4 through 6.4.6, from 6.3 through 6.3.6, from 6.2 through 6.2.7, from 6.1 through 6.1.8, from 6.0 through 6.0.10, from 5.9 through 5.9.11, from 5.8 through 5.8.11, from 5.7 through 5.7.13, from 5.6 through 5.6.15, from 5.5 through 5.5.16, from 5.4 through 5.4.17, from 5.3 through 5.3.19, from 5.2 through 5.2.22, from 5.1 through 5.1.20, from 5.0 through 5.0.23, from 4.9 through 4.9.27, from 4.8 through 4.8.26, from 4.7 through 4.7.30. |
| A flaw was found in the MZ binary format in Shim. An out-of-bounds read may occur, leading to a crash or possible exposure of sensitive data during the system's boot phase. |
| An out-of-bounds read flaw was found in Shim when it tried to validate the SBAT information. This issue may expose sensitive data during the system's boot phase. |
| An out-of-bounds read flaw was found in Shim due to the lack of proper boundary verification during the load of a PE binary. This flaw allows an attacker to load a crafted PE binary, triggering the issue and crashing Shim, resulting in a denial of service. |
| A buffer overflow was found in Shim in the 32-bit system. The overflow happens due to an addition operation involving a user-controlled value parsed from the PE binary being used by Shim. This value is further used for memory allocation operations, leading to a heap-based buffer overflow. This flaw causes memory corruption and can lead to a crash or data integrity issues during the boot phase. |
| A flaw was found in Shim when an error happened while creating a new ESL variable. If Shim fails to create the new variable, it tries to print an error message to the user; however, the number of parameters used by the logging function doesn't match the format string used by it, leading to a crash under certain circumstances. |
| A flaw was found in the libreswan client plugin for NetworkManager (NetkworkManager-libreswan), where it fails to properly sanitize the VPN configuration from the local unprivileged user. In this configuration, composed by a key-value format, the plugin fails to escape special characters, leading the application to interpret values as keys. One of the most critical parameters that could be abused by a malicious user is the `leftupdown`key. This key takes an executable command as a value and is used to specify what executes as a callback in NetworkManager-libreswan to retrieve configuration settings back to NetworkManager. As NetworkManager uses Polkit to allow an unprivileged user to control the system's network configuration, a malicious actor could achieve local privilege escalation and potential code execution as root in the targeted machine by creating a malicious configuration. |
| A remote code execution vulnerability was found in Shim. The Shim boot support trusts attacker-controlled values when parsing an HTTP response. This flaw allows an attacker to craft a specific malicious HTTP request, leading to a completely controlled out-of-bounds write primitive and complete system compromise. This flaw is only exploitable during the early boot phase, an attacker needs to perform a Man-in-the-Middle or compromise the boot server to be able to exploit this vulnerability successfully. |
